五金目录
指南:117
- 添加五金子类别,例如抽屉滑轨在五金类别下创建新的子类别,以便将抽屉滑轨等五金件添加到您的产品目录中。
- 通过管理端制造设置替换重复的五金卡片在管理端制造设置中查找重复的五金条目,检查每张卡片的使用位置,并将五金项添加到库中,使其可在设计中选用。
- 在门板系统构造下添加门板机构五金添加门板机构,例如气压上翻机构或卷帘门机构,并在门板系统构造中使用它们,以便后续进行定价和生成 BOQ。
- 将缺失的五金件和材料添加到目录中在Add hardware中,在定价或使用admin portal中的芯材和饰面材料进行设计之前,请先添加这些材料。
- Organise tandem drawer hardware in the catalogueManage tandem drawer hardware under the drawer system category and split it into subcategories by brand or type.
- 在目录中为抽屉组添加槽道在目录中的抽屉组定义中添加槽道,使其显示在每个抽屉上。
- Add hardware 与配件按 SKU 定价要为五金和配件定价,请在 Advanced Pricing 中的销售渠道下将其添加到 SKU。
- 通过admin portal添加Add hardware项目在admin portal中浏览仓库和目录下拉菜单,以添加Add hardware项目。
- 在admin portal中查找拉篮、抽拉件和挂衣杆在admin portal中找到拉篮和抽拉件选项以及挂衣杆,以便将它们添加到您的目录中。
- 为新五金件复用钻孔数据从类似的仓库物料复制制造详细信息,无需逐个手动输入钻孔。
- Add a utility hardware item in catalogueAdd a utility hardware item such as a push-to-open mechanism under a new utilities group in catalogue hardware.
- 添加抽屉滑轨和托底抽屉下载抽屉滑轨和托底抽屉,然后在设计中克隆并安装它们。
- 为与柜体板相接的门板选择零度铰链当门板与柜体板相接且没有竖向板时,请使用零度(全盖)铰链。
- File units, drawer sets and hardware in the right placePlace units, drawer sets and hardware SKUs in the correct category and group so designers can find them.
- 处理没有门店 SKU 的自动创建面板了解什么是没有门店 SKU 的自动创建面板,以及如何单独为它们定价。
- 无需层压板编码即可处理门窗材料门窗不需要层压板编码或类似的目录编码,因此您可以在没有编码的情况下处理它们,并单独导入其材料。
- 五金目录与五金定价如何协同工作了解五金目录如何保存您的五金件和文件夹,以及如何在定价区域为这些五金件输入费率。
- 如何计算每个柜体的铰链数量了解每个柜体的铰链数量如何遵循基于高度的规则,以及如何在目录中配置它。
- 仅在基础铰链 SKU 存在后关联五金件请先在目录中创建基础铰链 SKU,以便碰开机构等五金件有可关联的参照点。
- 关联五金,使数量在设计中的柜体放置时自动添加关联五金项,以便每当在设计中的柜体放置时,自动添加所需数量。
- 使用销售渠道筛选器缩小仓库结果范围在 Add From Warehouse 中选择一个品牌店,这样只会获取该品牌的模型。
- 了解gola拉手和封边型材的安装位置了解在拉手型材设置中,gola拉手和封边型材是固定在柜体上还是固定在门板上。
- Add finger groove hardware to a shutter design from the catalogueAdd the required groove from the admin hardware catalogue before using it in a shutter design.
- 在配置柜门之前,添加无拉手型材、拉手型材和玻璃在柜门系统配置中映射之前,请先设置柜门系统所需的型材和玻璃类型。
- 用藤编篮近似高柜从底抽开始,添加篮子,应用藤编材质并关闭面板,即可构建带藤编篮的高柜。
- 克隆五金件并将槽位的钻孔深度设为零在admin portal中从仓库添加新的五金品牌。
- 将五金件变体归组为独立条目或下拉选项决定五金件变体是作为单独的目录条目显示,还是作为在一个条目下从下拉菜单中选择的选项显示。
- 重命名默认铰链名称以匹配品牌在管理连接件卡片中重命名软件显示的默认铰链名称,使其匹配特定品牌。
- 为设计添加拉手和其他配件从默认库或仓库中放置拉手,并切换拉出单元的配件类型。
- 将Add hardware选项设为SKU,并为每个变体提供展示图片在管理后台中将Add hardware选项(例如柜门开合机构)设为SKU,并为每个变体提供各自的展示图片,以便设计师区分并选择正确的变体。
- 在目录的 Utilities 部分添加按压开启五金件在目录五金件的 Utilities 部分添加按压开启机构,包括上传其图片。
- 将型材分类为拉手型材或非拉手型材为每个型材指定拉手类型,以便设计师可直接从目录中选择拉手型材和非拉手型材。
- 在admin portal中创建五金子类别并排序创建五金子类别(如抽屉系统品牌),控制它们的显示顺序,并删除不再需要的子类别。
- Find a hardware item by finish and item numberOpen Catalog Hardware, narrow the list by finish, then open the subcategory and search the item number to find a specific hardware component.
- 按货号、名称和高度查找五金件先按货号/型号查找五金件,若无匹配,再按名称和高度查找。
- 查找仓库中不再显示的硬件物料了解为什么已添加的 SKU 和已弃用的分组会使物料不出现在仓库列表中,以及应到哪里查找它们。
- 五金选择如何基于设计师或自动完成了解目录中两类五金选择,以及自动生成取决于哪些条件。
- 在类别之间移动五金库项目了解哪些五金库项目可以在类别或子类别之间移动,哪些必须先克隆。
- 在目录中按名称搜索五金件并直接重命名按名称或编码查找特定五金件,以便直接在目录中重命名。
- 为五金设置显示单位和采购组大小选择显示单位和采购组大小,使五金按正确的可采购单位进行计数和计费。
- Set hardware core material with thickness and lamination propertiesDefine a hardware core material with its thickness and lamination so it can be linked to SKUs and finishes.
- 将标记钻孔设为直径 5 mm、深度 1 mm,铰链头钻孔除外将标记钻孔设为直径 5 mm、深度 1 mm,同时让铰链头钻孔保持其较大的直径。
- 了解 BOQ 与定价中的拉篮和抽拉五金了解拉篮和抽拉五金件如何用于 BOQ 与定价,而不影响开料清单或生产。
- 了解迷你固定件、双固定件和铰链如何与柜体关联迷你固定件、双固定件和铰链会随柜体默认添加。
- 通过admin portal上传3D门板和拉手模型通过admin portal上传3D门板和自定义拉手模型,将其添加到目录中。
- Add kitchen drawers and channels under the right hardware categoriesAdd kitchen drawers under the drawer systems hardware category and telescopic or quadro channels under the drawer channels category.
- Add or remove a handle at panel level via edit panelManage handles at panel level instead of only at partition level, attaching a handle SKU and setting the panel type and finishes.
- Configure drawer channel hardware without a size per entryConfigure drawer channels so that one hardware entry covers every channel length instead of creating a separate entry for each size.
- Confirm sales channel updates when publishing a bulk editPublish a bulk edit with a newly mapped sales channel by confirming the update, and check CSV uploads against the attempt's own download before anything is sent.
- Control which catalogue items a designer sees with sales channelsKeep catalogue categories and SKUs separate between locations or channels by assigning designers to the right sales channels.
- Copy hardware from catalogue and rebrand generic connectorsLearn that the default dowel is a generic connector.
- Create a sales channel for a brand in the catalogueCreate and update a sales channel for a brand in the Infurnia catalogue.
- Create a separate sales channel to build and test a new catalogueAssign the new channel only to the people working on the pricing and quotation, not to designers.
- Delete a sales channel blocked by existing subscriptionsClear the subscriber block on a sales channel so its deletion passes the subscriber check, either by unsubscribing every subscribing org or by switching the channel from public to private.
- Find a hardware item by its codeLocate the right hardware entry by code and fix a search that returns nothing.
- Fix a channel price that is wrong on tax or display unitRecognise a seeded custom channel price and correct it instead of editing the default price.
- Fix a hardware depth that does not applyChange the depth on the hardware entry, reload and re-add it, then check the drawer-level setting if it still does not take.
- How G profile handles reduce shutter heightLearn why adding a G profile handle to a shutter requires a height reduction and how to configure that deduction in the catalogue.
- 渠道订阅如何跨业务单元生效了解订阅公共销售渠道如何应用于整个组织以及新的业务单元。
- How drawer channel width comes from the purchased hardware SKULearn why the drawer channel width follows the hardware SKU you actually purchase rather than the 3D model in the design.
- How hardware quantities are outputHardware such as screws is specified and output in exact numbers, not as packets or boxes, so a design needing 278 screws reports 278 screws.
- How the Selling Price is calculated in Pricing (Sales Channel)See how the Default Price section adds tax to the default price to show the Selling Price, and how panel and shutter pricing options work.
- How warehouse hardware drawer systems are listedLearn that hardware drawer systems added from the warehouse show their dimensions in millimetres rather than inches.
- Isolate a hardware family with catalogue filtersUse a filter to isolate a specific hardware family, such as drawer systems, instead of viewing all hardware items together.
- Keep hardware systems owned and apply silver option settingsLearn how cloning and deletion of models supports managing hardware variants.
- Link cloned hinge connectors to the card in Manufacturing SettingsAfter cloning a hinge connector, link it back to the card in Manufacturing Settings so the clone takes effect.
- Locate minifix connectors under Catalog > Hardware > ConnectorsOpen the Catalog module and navigate to Hardware > Connectors to find minifix connectors.
- 从目录中设置抽屉导轨深度在admin portal中从目录选择抽屉导轨深度,抽屉深度会随之调整以匹配。
- Set drawer hardware panel requirementsCapture the bottom panel, back panel and channel values that drawer hardware drives, and understand how channel width and depth are used.
- Specify only panels and hardware in scenariosSpecify just the two panels and the hardware in a scenario, since spacing and similar parameters need not be entered.
- Supply CAM details when adding hardwareAdd CAM details to hardware when drilling is required.
- Understand the subscription request lifecycle for sales channelsFollow a sales channel subscription request from submission through auto-approval or manual review to its final state, and learn how to undo an approved subscription.
- Unmap sales channels to hide unused catalogue items from designersUnmap an item's sales channel to stop designers from seeing unused or unwanted catalogue items, and restore the mapping later if the item is needed again.
- 将已订阅渠道中的 SKU 拉取到您的目录中当渠道已公开共享且您的订阅已获批准后,即可将已订阅销售渠道中的 SKU 添加到您自己的组织或业务单元中。
- 通过 CSV 批量编辑五金 SKU 和销售渠道从仓库中筛选并添加五金,然后通过下载 CSV 批量编辑单个 SKU、销售渠道、价格、利润率和税费。
- 批量编辑价格和销售渠道为所选 SKU 更改价格和销售渠道,包括五金 SKU 和未映射销售渠道的 SKU。
- 更改柜体材料和拉手,无需复制柜体直接在已有柜体上更换材料或拉手,无需复制它们。
- 将玻璃存放在五金目录的玻璃分类下将玻璃存放在五金目录的玻璃分类下,以便用于定价。
- 在五金目录的连接件下添加一个螺丝 SKU在五金目录的连接件下创建一个螺丝 SKU,然后将其克隆到新组中以添加更多尺寸。
- 在目录五金中克隆组条灯,使其在设计方案中可见在目录五金中保存克隆的组条灯,然后在设计设置中刷新缓存,使更改显示在设计方案中。
- 为每种五金类型创建单独的类别为每种五金类型设置单独的类别,使抽屉系统、滑轨和铰链在design portal中保持分开。
- Generate category-specific item lists for core material and hardwareSelect a category under core material and hardware so the catalogue generates the item list for that category.
- 通过编辑属性将 SKU 关联到五金件将配件 SKU 附加到五金件,使该 SKU 与该五金件一同显示。
- 将带五金配件的柜体结构发布到目录发布柜体结构,使其可重复使用,并自动携带其门板机构五金配件。
- 克隆五金组及其销售渠道映射和价格将五金组复制到同一类别下的目标子类别中,可选择一并复制其销售渠道映射和价格,使克隆出的 SKU 对设计师保持可见。
- 克隆五金件并将其设置为新零件克隆五金件,重命名克隆件,更新其附加属性以匹配新零件,并在使用前将铰链放在五金件-铰链类别下。
- 克隆五金件以添加新部件通过克隆相似的五金件并调整克隆件,添加库中没有的五金件。
- 将非自有的仓库五金件克隆到其所属分组将显示为非自有的仓库五金件克隆到其现有分组,使副本归属于客户的目录并可编辑。
- 没有拉手型材的品牌如何建模拉手了解某些品牌如何仅使用门板型材,并将拉手作为单独的拧装部件安装。
- 子/组件 SKU 价格在各销售渠道中如何解析请遵循决定子 SKU 或组件 SKU 在您的上下文中采用哪个价格的继承阶梯。
- 约束和规则如何控制材料、饰面、定价和五金了解约束和规则如何控制哪些材料与饰面可以组合、定价如何运作,以及五金和饰面如何自动应用。
- 将 SKU 发布到销售渠道并了解静默过滤了解为什么将 SKU 发布到渠道时会静默丢弃不在库存中的 SKU 并跳过重复项,以及移除操作的行为有何不同。
- Bulk edit SKUs across sales channels in the catalogueSelect your SKUs, choose the editing mode, tick the sales channels, then apply the change to all selected SKUs before publishing.
- Capture brand, SKU name and article number for hardwareRecord the brand name, SKU name and article number for hardware components and put screw diameter and depth in the item name so every part is identifiable in the catalogue.
- Change a SKU's unit via admin portal sales channel pricingChange the unit of a catalogue SKU such as edgeband without altering the overall project unit.
- Check presence in cabinets for a hardware cardFind out whether a hardware card is actually used in any cabinet before removing a duplicate.
- Clone a SKU to create a new hardware sizeCreate an additional hardware size by copying an existing SKU and changing its name and model number.
- Clone a connector card to create a new hardware connectorConfigure panel one and panel two drills together in the same connector card so a cloned card carries both.
- Clone a handle, pull-out or channel variantCreate a new handle, pull-out or channel variant by cloning an existing SKU and renaming the clone.
- Clone glass and hardware rather than building from scratchPrefer cloning an existing warehouse SKU for glass and hardware so the new item behaves correctly.
- Create a new group for a hardware variant in the catalogueGive a hardware variant its own group when it does not fit an existing one, so you can clone its SKUs into it.
- How shutter core, edgeband and handle settings affect cabinetsLearn how a chosen shutter core, the Edgeband panel types and a handle's Shutter Height Reduction change the cabinets you place.
- Refresh SKU cache to restore global hardware in old designsRun a refresh SKU cache on old designs so they pull in the hardware logic originally set for the account.
- 订阅品牌的销售渠道以添加其项目通过订阅该品牌的销售渠道,将品牌五金或设计添加到您的目录中。
- 通过 CSV 更新默认价格而不更改销售渠道价格使用 CSV 批量更新每个 SKU 的默认价格记录,同时不更改销售渠道价格。
- Use clone group to copy hardware into your own folderCopy hardware items from the Infurnia library into your own folder with the clone group shortcut instead of recreating them.
- Use the Clone Sales channel mapping and Prices checkbox in bulk cloneTick the header checkbox to select every SKU's sales channel mapping and prices at once, and read its indeterminate state when only some rows are ticked.
更多指南 10
显示全部(10)
- 查看 Infurnia 库中已包含的内容了解 Infurnia 库中内置了哪些防火板、封边和五金件,以及哪些防火板饰面是 Infurnia 默认提供的,而不是您自己目录中的条目。
- 编辑目录项价格,包括批量编辑通过下载的目录电子表格,逐个或批量设置或更改目录项的默认价格,并了解销售渠道何时不再遵循该价格。
- Add connector cards at admin levelAdd connector cards at admin level so hardware with full dimensions appears in production output.
- Check the default edge profile variants in the catalogueBoth edge profile variants, with handle and without handle, are included in the catalogue by default.
- Fix a missing price: check price-type attachment and user assignmentFind out why a price or item does not appear for a sales channel by checking the price type's channel attachment and the user's assignment.
- Rename global connector names per accountRename global connectors such as the double-panel and minifix connectors for one account when the client's standards differ from the global standard.
- Set autoscaling for models and ready-made-width itemsDecide when a model needs autoscaling enabled and when fixed ready-made-width items like wire baskets need it switched off.
- Set procurement length and unit for profilesDefine how long a profile or long-length hardware is and in which unit it is bought, so per-length pricing and rounding work.
- Store and validate manufacturing details JSONKeep the manufacturing details property as valid JSON so machining contours and drills are applied when the hardware is placed.
- Turning on 'use default price' discards any values entered in the same saveLearn what happens to entered values, formulas and channel-specific settings when you turn on the link to the default price.