வன்பொருள் பட்டியல்
வழிகாட்டிகள்: 117
- Add a hardware subcategory such as drawer channelsCreate a new sub-category under a hardware category so you can add hardware items such as drawer channels to your catalogue.
- நிர்வாக உற்பத்தி அமைப்புகள் மூலம் நகல் வன்பொருள் அட்டைகளை மாற்றவும்நிர்வாக உற்பத்தி அமைப்புகளில் நகல் வன்பொருள் பதிவுகளைக் கண்டறிந்து, ஒவ்வொரு அட்டையும் எங்கு பயன்படுத்தப்படுகிறது என்பதைச் சரிபார்த்து, வன்பொருள் பொருட்களை நூலகத்தில் சேர்த்து அவை ஒரு வடிவமைப்பில் தேர்ந்தெடுக்கக்கூடியதாக இருக்கும்படி செய்யவும்.
- Add shutter mechanism hardware under shutter system constructionAdd shutter mechanisms such as gas lift-up or rolling shutter mechanisms and use them in shutter system construction so pricing and BOQ follow.
- பட்டியலில் இல்லாத வன்பொருட்களையும் பொருட்களையும் சேர்க்கவும்விலை நிர்ணயம் செய்வதற்கோ வடிவமைப்பதற்கோ முன் admin portal இல் Add hardware, மூலப் பொருட்கள் மற்றும் ஃபினிஷ் பொருட்களைச் சேர்க்கவும்.
- பட்டியலில் டேன்டம் இழுப்பறை வன்பொருளை ஒழுங்கமைக்கவும்இழுப்பறை அமைப்பு வகையின் கீழ் டேன்டம் இழுப்பறை வன்பொருளை நிர்வகித்து, பிராண்டு அல்லது வகையின்படி துணை வகைகளாகப் பிரிக்கவும்.
- பட்டியலில் உள்ள இழுப்பறைத் தொகுப்பில் சேனல்களைச் சேர்க்கவும்பட்டியலில் உள்ள இழுப்பறைத் தொகுப்பு வரையறையில் ஒரு சேனலைச் சேர்க்கவும், அதனால் அது ஒவ்வொரு இழுப்பறையிலும் தோன்றும்.
- Add hardware மற்றும் துணைக்கருவிகளின் SKU அளவிலான விலை நிர்ணயம்Advanced Pricing இல் உள்ள விற்பனை வழித்தடத்தின் கீழ் அவற்றைச் சேர்த்து, SKU அளவில் வன்பொருள் மற்றும் துணைக்கருவிகளுக்கு விலை நிர்ணயம் செய்யுங்கள்.
- admin portal மூலம் Add hardware உருப்படிகள்admin portal இல் உள்ள கிடங்கு மற்றும் பட்டியல் கீழ்த்தேர்வு மெனுக்களை வழிசெலுத்தி Add hardware உருப்படிகளைச் சேர்க்கவும்.
- Find baskets, pull-outs and hanger rods in the admin portalLocate basket and pull-out options and hanger rods in the admin portal so you can add them to your catalogue.
- புதிய ஹார்ட்வேர் உருப்படிக்கு துளையிடல் தரவை மீண்டும் பயன்படுத்துதல்ஒவ்வொரு துளையையும் கைமுறையாக உள்ளிடாமல், ஒத்த கிடங்கு உருப்படியிலிருந்து உற்பத்தி விவரங்களை நகலெடுக்கவும்.
- Add a utility hardware item in catalogueAdd a utility hardware item such as a push-to-open mechanism under a new utilities group in catalogue hardware.
- டிராயர் சேனல்கள் மற்றும் டேண்டம் டிராயர்களைச் சேர்க்கவும்டிராயர் சேனல்கள் மற்றும் டேண்டம் டிராயர்களைப் பதிவிறக்கி, பின்னர் அவற்றை உங்கள் வடிவமைப்புகளில் நகலெடுத்துப் பொருத்தவும்.
- கதவு இலை ஒரு கேசிங் பேனலுடன் சந்திக்கும் நிலைக்கு ஜீரோ-கிராங்க் கீல் தேர்ந்தெடுக்கவும்கதவு இலை செங்குத்துப் பேனல் இல்லாமல் ஒரு கேசிங் பேனலுடன் சந்திக்கும்போது ஜீரோ-கிராங்க் (முழு மேல்படர்வு) கீலைப் பயன்படுத்தவும்.
- File units, drawer sets and hardware in the right placePlace units, drawer sets and hardware SKUs in the correct category and group so designers can find them.
- Handle auto-created panels with no store SKULearn what auto-created panels without a store SKU are and how to price them separately.
- லேமினேட் குறியீடுகள் இல்லாமல் கதவு மற்றும் ஜன்னல் பொருட்களைக் கையாளுங்கள்கதவுகள் மற்றும் ஜன்னல்களுக்கு லேமினேட் குறியீடு அல்லது அதுபோன்ற பட்டியல் குறியீடு தேவையில்லை, எனவே குறியீடுகள் இல்லாமல் அவற்றைக் கையாளலாம், அவற்றின் பொருட்களைத் தனியாக இறக்குமதி செய்யலாம்.
- வன்பொருள் பட்டியலும் வன்பொருள் விலையிடலும் எவ்வாறு ஒன்றாகச் செயல்படுகின்றனவன்பொருள் பட்டியல் உங்கள் வன்பொருள் பொருட்களையும் கோப்புறைகளையும் எவ்வாறு வைத்திருக்கிறது, அதே நேரத்தில் விலையிடல் பகுதியில் அந்தப் பொருட்களுக்கு விலைகள் எவ்வாறு உள்ளிடப்படுகின்றன என்பதை அறிக.
- ஒரு கேபினெட்டுக்கு கீல் எண்ணிக்கை எவ்வாறு கணக்கிடப்படுகிறதுஒரு கேபினெட்டுக்கு கீல் எண்ணிக்கை உயர அடிப்படையிலான விதியை எவ்வாறு பின்பற்றுகிறது, பட்டியலில் அதை எவ்வாறு அமைப்பது என்பதை அறிக.
- அடிப்படை கீல் SKU உருவாக்கப்பட்ட பிறகே ஹார்ட்வேயை இணைக்கவும்புஷ்-டு-ஓபன் மெக்கானிசம் போன்ற ஹார்ட்வேக்கு இணைப்பதற்கான குறிப்பு புள்ளி கிடைக்கும் வகையில், முதலில் பட்டியலில் அடிப்படை கீல் SKU-ஐ உருவாக்கவும்.
- Link hardware so quantity auto-adds with the cabinet in a designLink hardware items so the required quantity is added automatically whenever a cabinet is placed in a design.
- விற்பனை-சேனல் வடிகட்டியுடன் கிடங்கு முடிவுகளைக் குறைக்கவும்Add From Warehouse இல் ஒரு பிராண்ட் ஸ்டோரைத் தேர்ந்தெடுக்கவும், அப்போது அந்தப் பிராண்டின் மாடல்கள் மட்டுமே பெறப்படும்.
- கோலா கைப்பிடிகள் மற்றும் விளிம்பு விவரக்கோடுகள் எங்கே பொருத்தப்படுகின்றன என்பதைப் புரிந்துகொள்ளுங்கள்கைப்பிடி விவரக்கோடு அமைப்பில், கோலா கைப்பிடிகளும் விளிம்பு விவரக்கோடுகளும் கேபினட் உடற்கட்டில் பொருத்தப்படுகின்றனவா அல்லது கதவுப் பலகையில் பொருத்தப்படுகின்றனவா என்பதை அறிந்துகொள்ளுங்கள்.
- Catalogues-இல் இருந்து ஒரு shutter design-க்கு finger groove hardware சேர்க்கவும்தேவையான groove-ஐ shutter design-ல் பயன்படுத்தும் முன், admin hardware catalogue-இல் இருந்து அதைச் சேர்க்கவும்.
- ஷட்டர் அமைப்பை உருவாக்கும் முன் கைப்பிடி அல்லாத, கைப்பிடி புரொஃபைல்களையும் கண்ணாடியையும் சேர்க்கவும்உங்கள் ஷட்டர் அமைப்புக்குத் தேவையான புரொஃபைல்களையும் கண்ணாடி வகைகளையும் ஷட்டர் சிஸ்டம் கான்ஃபிகரேஷனில் இணைப்பதற்கு முன் அமைக்கவும்.
- பின்னல் கூடையுடன் கூடிய உயர் அலமாரியை தோராயமாக உருவாக்குதல்கீழ் இழுப்பறையில் தொடங்கி, ஒரு கூடையைச் சேர்த்து, பின்னல் பொருளைப் பயன்படுத்தி, முகப்புப் பலகையை அணைப்பதன் மூலம் பின்னல் கூடையுடன் கூடிய உயர் அலமாரியை உருவாக்குங்கள்.
- வன்பொருள் உருப்படிகளை நகலெடுத்து, சேனல்களுக்கான துரப்பண ஆழத்தை பூஜ்ஜியமாக்குadmin portal இல் உள்ள கிடங்கிலிருந்து புதிய வன்பொருள் பிராண்டைச் சேர்க்கவும்.
- வன்பொருள் மாறுபாடுகளைத் தனித் தனி உள்ளீடுகளாகவோ அல்லது dropdown விருப்பங்களாகவோ தொகுக்கவும்வன்பொருள் மாறுபாடுகள் தனித் தனி பட்டியல் உள்ளீடுகளாகத் தோன்றுமா அல்லது ஒரு உள்ளீட்டின் கீழ் dropdown-இல் தேர்ந்தெடுக்கும் விருப்பங்களாகத் தோன்றுமா என்பதைத் தீர்மானிக்கவும்.
- ஒரு பிராண்டுடன் பொருந்தும் வகையில் இயல்புநிலை கீல் பெயர்களை மறுபெயரிடுங்கள்நிரலில் காட்டப்படும் இயல்புநிலை கீல் பெயர்களை, ஒரு குறிப்பிட்ட பிராண்டுடன் பொருந்தும் வகையில், நிர்வாக இணைப்பான் அட்டையில் மறுபெயரிடுங்கள்.
- ஒரு வடிவமைப்பில் கைப்பிடிகள் மற்றும் பிற துணைக்கருவிகளைச் சேர்க்கவும்இயல்புநிலை நூலகத்திலிருந்து அல்லது கிடங்கிலிருந்து கைப்பிடிகளை வைத்து, இழுக்கும் அலகின் துணைக்கருவி வகையை மாற்றவும்.
- Add hardware விருப்பங்களை SKU-களாக, ஒவ்வொரு வகைக்கும் ஒரு காட்சிப் படத்துடன்ஷட்டர் இயங்குமுறைகள் போன்ற Add hardware விருப்பங்களை நிர்வாகத்தில் SKU-களாகச் சேர்த்து, ஒவ்வொரு வகைக்கும் தனிக் காட்சிப் படத்தை வழங்குங்கள்; அதனால் வடிவமைப்பாளர்கள் அவற்றை வேறுபடுத்தி சரியானதைத் தேர்ந்தெடுக்க முடியும்.
- பட்டியலின் Utilities பிரிவில் push-to-open ஹார்ட்வேரைச் சேர்க்கவும்பட்டியல் ஹார்ட்வேரின் Utilities பிரிவில் push-to-open இயங்குமுறையைச் சேர்க்கவும், அதன் படத்தையும் பதிவேற்றவும்.
- ப்ரொஃபைல்களை கைப்பிடி அல்லது கைப்பிடி அல்லாதது என வகைப்படுத்துங்கள்ஒவ்வொரு ப்ரொஃபைலுக்கும் ஒரு கைப்பிடி வகையைக் கொடுங்கள், இதனால் வடிவமைப்பாளர்கள் கைப்பிடி மற்றும் கைப்பிடி அல்லாத ப்ரொஃபைல்களை நேரடியாக பட்டியலில் இருந்து தேர்ந்தெடுக்க முடியும்.
- admin portal இல் வன்பொருள் துணை வகைகளை உருவாக்கி ஆர்டர் செய்யுங்கள்இழுப்பறை-அமைப்பு பிராண்டுகள் போன்ற வன்பொருள் துணை வகைகளை உருவாக்குங்கள், அவை தோன்றும் வரிசையைக் கட்டுப்படுத்துங்கள், தேவையில்லாதவற்றை நீக்குங்கள்.
- முடிவு மற்றும் பொருள் எண் மூலம் ஒரு வன்பொருள் பொருளைக் கண்டறியவும்Catalog Hardware ஐத் திறந்து, முடிவு மூலம் பட்டியலைக் குறைத்து, பின்னர் துணை வகையைத் திறந்து, குறிப்பிட்ட வன்பொருள் கூறைக் கண்டறிய பொருள் எண்ணைத் தேடவும்.
- கட்டுரை எண், பெயர் மற்றும் உயரம் மூலம் வன்பொருளைக் கண்டறியுங்கள்வன்பொருளை அதன் கட்டுரை/மாதிரி எண் மூலம் தேடுங்கள்; எதுவும் பொருந்தவில்லை என்றால் பெயர் மற்றும் உயரத்தைப் பயன்படுத்துங்கள்.
- கிடங்கில் இனி தோன்றாத வன்பொருள் பொருட்களைக் கண்டறியுங்கள்சேர்க்கப்பட்ட SKU-களும் நீக்கப்பட்ட குழுக்களும் ஏன் பொருட்களைக் கிடங்குப் பட்டியலில் இருந்து விலக்குகின்றன, அவற்றை வேறு எங்கு கண்டறிவது என்பதை அறிக.
- வன்பொருள் தேர்வு வடிவமைப்பாளர் அடிப்படையிலானதா அல்லது தானியங்கியாபட்டியலில் உள்ள இரண்டு வகையான வன்பொருள் தேர்வுகளையும், தானியங்கி உருவாக்கம் எதைச் சார்ந்துள்ளது என்பதையும் அறிக.
- வன்பொருள் நூலக உருப்படிகளை வகைகளுக்கு இடையே நகர்த்தவும்எந்த வன்பொருள் நூலக உருப்படிகளை வகைகள் அல்லது துணை வகைகளுக்கு இடையே நகர்த்தலாம், எவற்றை முதலில் நகலெடுக்க வேண்டும் என்பதை அறிக.
- பெயரால் பட்டியலில் வன்பொருளைத் தேடி நேரடியாகப் பெயர்மாற்றுங்கள்ஒரு குறிப்பிட்ட வன்பொருள் பொருளை அதன் பெயர் அல்லது குறியீட்டால் கண்டறிந்து, பட்டியலில் நேரடியாகப் பெயர்மாற்றலாம்.
- வன்பொருளுக்கான காட்சி அலகு மற்றும் கொள்முதல் தொகுப்பு அளவை அமைக்கவும்வன்பொருள் சரியான வாங்கக்கூடிய அலகாக எண்ணப்பட்டு கட்டணம் வசூலிக்கப்படுவதற்கு காட்சி அலகு மற்றும் கொள்முதல் தொகுப்பு அளவைத் தேர்ந்தெடுக்கவும்.
- தடிமன் மற்றும் லேமினேஷன் பண்புகளுடன் ஹார்ட்வேர் மையப் பொருளை அமைக்கவும்ஒரு ஹார்ட்வேர் மையப் பொருளை அதன் தடிமன் மற்றும் லேமினேஷனுடன் வரையறுக்கவும், இதனால் அதை SKU-கள் மற்றும் ஃபினிஷ்களுடன் இணைக்க முடியும்.
- கீல் தலை தவிர, குறியிடும் துரப்பணங்களை 5 மிமீ விட்டம் மற்றும் 1 மிமீ ஆழத்திற்கு அமைக்கவும்கீல் தலை துரப்பணத்தை அதன் பெரிய விட்டத்திலேயே விட்டுவிட்டு, உங்கள் குறியிடும் துரப்பணங்களை 5 மிமீ விட்டம் மற்றும் 1 மிமீ ஆழத்திற்கு அமைக்கவும்.
- BOQ மற்றும் விலை நிர்ணயத்தில் பாஸ்கெட் மற்றும் புல்-அவுட் ஹார்ட்வேரைப் புரிந்துகொள்ளுங்கள்கட் லிஸ்ட் அல்லது உற்பத்தியைப் பாதிக்காமல், BOQ மற்றும் விலை நிர்ணயத்திற்கு பாஸ்கெட் மற்றும் புல்-அவுட் ஹார்ட்வேர் பொருட்கள் எவ்வாறு பயன்படுத்தப்படுகின்றன என்பதை அறிக.
- Understand how mini-fixes, doubles and hinges link to cabinetsMini-fixes, doubles and hinges are added by default with cabinets.
- admin portal வழியாக 3D ஷட்டர் மற்றும் கைப்பிடி மாதிரிகளைப் பதிவேற்றவும்admin portal வழியாகப் பதிவேற்றி, 3D ஷட்டர் மற்றும் தனிப்பயன் கைப்பிடி மாதிரிகளைப் பட்டியலில் சேர்க்கவும்.
- Add kitchen drawers and channels under the right hardware categoriesAdd kitchen drawers under the drawer systems hardware category and telescopic or quadro channels under the drawer channels category.
- Add or remove a handle at panel level via edit panelManage handles at panel level instead of only at partition level, attaching a handle SKU and setting the panel type and finishes.
- Configure drawer channel hardware without a size per entryConfigure drawer channels so that one hardware entry covers every channel length instead of creating a separate entry for each size.
- Confirm sales channel updates when publishing a bulk editPublish a bulk edit with a newly mapped sales channel by confirming the update, and check CSV uploads against the attempt's own download before anything is sent.
- Control which catalogue items a designer sees with sales channelsKeep catalogue categories and SKUs separate between locations or channels by assigning designers to the right sales channels.
- Copy hardware from catalogue and rebrand generic connectorsLearn that the default dowel is a generic connector.
- பட்டியலில் ஒரு பிராண்டிற்கான விற்பனை சேனலை உருவாக்கவும்Infurnia பட்டியலில் ஒரு பிராண்டிற்கான விற்பனை சேனலை உருவாக்கி புதுப்பிக்கவும்.
- Create a separate sales channel to build and test a new catalogueAssign the new channel only to the people working on the pricing and quotation, not to designers.
- Delete a sales channel blocked by existing subscriptionsClear the subscriber block on a sales channel so its deletion passes the subscriber check, either by unsubscribing every subscribing org or by switching the channel from public to private.
- Find a hardware item by its codeLocate the right hardware entry by code and fix a search that returns nothing.
- Fix a channel price that is wrong on tax or display unitRecognise a seeded custom channel price and correct it instead of editing the default price.
- Fix a hardware depth that does not applyChange the depth on the hardware entry, reload and re-add it, then check the drawer-level setting if it still does not take.
- How G profile handles reduce shutter heightLearn why adding a G profile handle to a shutter requires a height reduction and how to configure that deduction in the catalogue.
- வணிகப் பிரிவுகள் முழுவதும் சேனல் சந்தாக்கள் எவ்வாறு செயல்படுகின்றனஒரு பொது விற்பனைச் சேனலுக்கு சந்தா செலுத்துவது உங்கள் முழு நிறுவனத்திற்கும், புதிய வணிகப் பிரிவுகளுக்கும் எவ்வாறு பொருந்துகிறது என்பதை அறிக.
- How drawer channel width comes from the purchased hardware SKULearn why the drawer channel width follows the hardware SKU you actually purchase rather than the 3D model in the design.
- How hardware quantities are outputHardware such as screws is specified and output in exact numbers, not as packets or boxes, so a design needing 278 screws reports 278 screws.
- How the Selling Price is calculated in Pricing (Sales Channel)See how the Default Price section adds tax to the default price to show the Selling Price, and how panel and shutter pricing options work.
- How warehouse hardware drawer systems are listedLearn that hardware drawer systems added from the warehouse show their dimensions in millimetres rather than inches.
- Isolate a hardware family with catalogue filtersUse a filter to isolate a specific hardware family, such as drawer systems, instead of viewing all hardware items together.
- Keep hardware systems owned and apply silver option settingsLearn how cloning and deletion of models supports managing hardware variants.
- Link cloned hinge connectors to the card in Manufacturing SettingsAfter cloning a hinge connector, link it back to the card in Manufacturing Settings so the clone takes effect.
- Locate minifix connectors under Catalog > Hardware > ConnectorsOpen the Catalog module and navigate to Hardware > Connectors to find minifix connectors.
- பட்டியலிலிருந்து இழுப்புப்பெட்டி தடத்தின் ஆழங்களை அமைக்கவும்admin portal இல் உள்ள பட்டியலிலிருந்து இழுப்புப்பெட்டி தடத்தின் ஆழத்தைத் தேர்ந்தெடுக்கவும், அதன்படி இழுப்புப்பெட்டியின் ஆழம் சரிசெய்யப்படும்.
- Set drawer hardware panel requirementsCapture the bottom panel, back panel and channel values that drawer hardware drives, and understand how channel width and depth are used.
- Specify only panels and hardware in scenariosSpecify just the two panels and the hardware in a scenario, since spacing and similar parameters need not be entered.
- Supply CAM details when adding hardwareAdd CAM details to hardware when drilling is required.
- Understand the subscription request lifecycle for sales channelsFollow a sales channel subscription request from submission through auto-approval or manual review to its final state, and learn how to undo an approved subscription.
- Unmap sales channels to hide unused catalogue items from designersUnmap an item's sales channel to stop designers from seeing unused or unwanted catalogue items, and restore the mapping later if the item is needed again.
- Pull SKUs from a subscribed channel into your catalogAdd SKUs from a subscribed sales channel into your own org or business unit once the channel is publicly shared and your subscription is approved.
- CSV மூலம் ஹார்ட்வேர் SKU-கள் மற்றும் விற்பனை சேனலை மொத்தமாகத் திருத்தவும்கிடங்கிலிருந்து ஹார்ட்வேரை வடிகட்டி சேர்க்கவும், பின்னர் CSV பதிவிறக்கங்களைப் பயன்படுத்தி தனிப்பட்ட SKU-கள், விற்பனை சேனல், விலை, மார்ஜின் மற்றும் வரியை மொத்தமாகத் திருத்தவும்.
- Bulk edit prices and sales channelsChange prices and sales channels across selected SKUs, including hardware SKUs and SKUs with no mapped sales channel.
- கேபினெட்டுகளை நகலெடுக்காமல் கேபினெட் பொருள் மற்றும் கைப்பிடியை மாற்றவும்ஏற்கனவே உள்ள கேபினெட்டுகளை நகலெடுப்பதற்குப் பதிலாக அவற்றின் பொருள் அல்லது கைப்பிடியை மாற்றவும்.
- கண்ணாடியை வன்பொருள் பட்டியலில் கண்ணாடி என்பதன் கீழ் சேமிக்கவும்விலை நிர்ணயத்திற்குக் கிடைக்கும் வகையில், கண்ணாடியை வன்பொருள் பட்டியலில் கண்ணாடி என்பதன் கீழ் சேமிக்கவும்.
- இணைப்பிகளின் கீழ் வன்பொருள் பட்டியலில் ஒரு திருகு SKU-ஐச் சேர்க்கவும்இணைப்பிகளின் கீழ் வன்பொருள் பட்டியலில் ஒரு திருகு SKU-ஐ உருவாக்கி, மேலும் அளவுகளைச் சேர்க்க அதை ஒரு புதிய குழுவில் நகலெடுக்கவும்.
- வடிவமைப்பில் தெரியும்படி செய்ய, catalog hardware-இல் group strip light-ஐ clone செய்யவும்clone செய்த group strip light-ஐ catalog hardware-இல் சேமித்து, வடிவமைப்பு settings-இல் cache-ஐ refresh செய்யவும், அப்போது மாற்றம் வடிவமைப்பில் தெரியும்.
- ஒவ்வொரு வன்பொருள் வகைக்கும் தனித்தனி வகைகளை உருவாக்கவும்ஒவ்வொரு வன்பொருள் வகைக்கும் அதற்கே உரிய வகையை வழங்குங்கள், இதனால் இழுப்பு அமைப்புகள், சேனல்கள் மற்றும் கீல்கள் design portal இல் தனித்தனியாக இருக்கும்.
- Generate category-specific item lists for core material and hardwareSelect a category under core material and hardware so the catalogue generates the item list for that category.
- திருத்தப் பண்புகள் மூலம் ஒரு SKU-வை வன்பொருளுடன் இணைக்கவும்ஒரு துணைக்கருவி SKU-வை ஒரு வன்பொருள் உருப்படியுடன் இணைக்கவும், அதனால் அந்த SKU அந்த வன்பொருளுடன் தோன்றும்.
- வன்பொருளுடன் வடிவமைக்கப்பட்ட கேபினெட் கட்டமைப்பை பட்டியலுக்கு வெளியிடவும்ஒரு கேபினெட் கட்டமைப்பை வெளியிடுங்கள், அது மீண்டும் பயன்படுத்தக்கூடியதாகி, அதன் ஷட்டர் இயக்கவியல் வன்பொருளை தானாகவே கொண்டு செல்லும்.
- விற்பனை சேனல் மேப்பிங் மற்றும் விலைகளுடன் ஒரு வன்பொருள் குழுவை நகலெடுக்கவும்ஒரே வகையின் இலக்கு துணை வகைக்குள் ஒரு வன்பொருள் குழுவை நகலெடுக்கவும்; விருப்பமானால் அதன் விற்பனை சேனல் மேப்பிங் மற்றும் விலைகளையும் எடுத்துச் செல்லவும், இதனால் நகலெடுக்கப்பட்ட SKU-கள் வடிவமைப்பாளர்களுக்குத் தெரியும்.
- ஒரு வன்பொருள் உருப்படியை நகலெடுத்து அதைப் புதிய பாகமாக அமைக்கவும்ஒரு வன்பொருள் உருப்படியை நகலெடுத்து, நகலுக்குப் புதிய பெயரிடவும், புதிய பாகத்திற்குப் பொருந்துமாறு அதன் கூடுதல் பண்புகளைப் புதுப்பிக்கவும், பயன்படுத்துவதற்கு முன் கீல்களை hardware-hinges வகைக்குக் கீழ் வைக்கவும்.
- புதிய பாகத்தைச் சேர்க்க ஒரு வன்பொருள் உருப்படியை குளோன் செய்யவும்நூலகத்தில் இல்லாத ஒரு வன்பொருள் உருப்படியை, ஒத்த ஒன்றை குளோன் செய்து அந்த குளோனை மாற்றியமைப்பதன் மூலம் சேர்க்கவும்.
- சொந்தமில்லாத கிடங்கு வன்பொருள் உருப்படியை அதன் குழுவிற்குள் நகலெடுக்கவும்சொந்தமில்லாததாகக் காட்டப்படும் கிடங்கு வன்பொருள் உருப்படியை அதன் ஏற்கனவே உள்ள குழுவிற்குள் நகலெடுக்கவும், இதனால் நகல் வாடிக்கையாளரின் பட்டியலுக்குச் சொந்தமாகி திருத்தக்கூடியதாக இருக்கும்.
- கைப்பிடி சுயவிவரங்கள் இல்லாத பிராண்டுகள் கைப்பிடிகளை எவ்வாறு மாதிரியாக்குகின்றனசில பிராண்டுகள் ஷட்டர் சுயவிவரங்களை மட்டுமே பயன்படுத்தி, கைப்பிடியைத் தனியாக திருகி இணைக்கும் பகுதியாக எவ்வாறு இணைக்கின்றன என்பதை அறிக.
- துணை/கூறு SKU விலைகள் விற்பனை சேனல்களில் எவ்வாறு தீர்மானிக்கப்படுகின்றனஉங்கள் சூழலில் ஒரு துணை அல்லது கூறு SKU எந்த விலையை எடுக்கும் என்பதைத் தீர்மானிக்கும் மரபுவழிப் படிநிலையைப் பின்பற்றுங்கள்.
- கட்டுப்பாடுகளும் விதிகளும் பொருட்கள், ஃபினிஷ்கள், விலை நிர்ணயம் மற்றும் ஹார்ட்வேரை எவ்வாறு நிர்வகிக்கின்றனகட்டுப்பாடுகளும் விதிகளும் எந்தப் பொருட்களும் ஃபினிஷ்களும் இணைவதை, விலை நிர்ணயம் எவ்வாறு செயல்படுகிறது என்பதை, மேலும் ஹார்ட்வேரும் ஃபினிஷ்களும் தானாக எவ்வாறு பயன்படுத்தப்படுகின்றன என்பதை அறிக.
- Publish SKUs to a sales channel and understand silent filteringLearn why publishing SKUs to a channel silently drops SKUs that are not in inventory and skips duplicates, and how removal behaves differently.
- Bulk edit SKUs across sales channels in the catalogueSelect your SKUs, choose the editing mode, tick the sales channels, then apply the change to all selected SKUs before publishing.
- Capture brand, SKU name and article number for hardwareRecord the brand name, SKU name and article number for hardware components and put screw diameter and depth in the item name so every part is identifiable in the catalogue.
- Change a SKU's unit via admin portal sales channel pricingChange the unit of a catalogue SKU such as edgeband without altering the overall project unit.
- Check presence in cabinets for a hardware cardFind out whether a hardware card is actually used in any cabinet before removing a duplicate.
- Clone a SKU to create a new hardware sizeCreate an additional hardware size by copying an existing SKU and changing its name and model number.
- Clone a connector card to create a new hardware connectorConfigure panel one and panel two drills together in the same connector card so a cloned card carries both.
- Clone a handle, pull-out or channel variantCreate a new handle, pull-out or channel variant by cloning an existing SKU and renaming the clone.
- Clone glass and hardware rather than building from scratchPrefer cloning an existing warehouse SKU for glass and hardware so the new item behaves correctly.
- Create a new group for a hardware variant in the catalogueGive a hardware variant its own group when it does not fit an existing one, so you can clone its SKUs into it.
- How shutter core, edgeband and handle settings affect cabinetsLearn how a chosen shutter core, the Edgeband panel types and a handle's Shutter Height Reduction change the cabinets you place.
- Refresh SKU cache to restore global hardware in old designsRun a refresh SKU cache on old designs so they pull in the hardware logic originally set for the account.
- ஒரு பிராண்டின் விற்பனை சேனலுக்கு சந்தா செலுத்தி அதன் பொருட்களைச் சேர்க்கவும்அந்த பிராண்டின் விற்பனை சேனலுக்கு சந்தா செலுத்துவதன் மூலம் பிராண்ட் செய்யப்பட்ட வன்பொருள் அல்லது வடிவமைப்புகளை உங்கள் பட்டியலில் சேர்க்கவும்.
- விற்பனை-சேனல் விலைகளை மாற்றாமல் CSV மூலம் இயல்புநிலை விலைகளைப் புதுப்பிக்கவும்விற்பனை-சேனல் விலைகளைத் தொடாமல், CSV மூலம் ஒவ்வொரு SKU-வின் இயல்புநிலை விலைப் பதிவையும் மொத்தமாகப் புதுப்பிக்கவும்.
- Use clone group to copy hardware into your own folderCopy hardware items from the Infurnia library into your own folder with the clone group shortcut instead of recreating them.
- Use the Clone Sales channel mapping and Prices checkbox in bulk cloneTick the header checkbox to select every SKU's sales channel mapping and prices at once, and read its indeterminate state when only some rows are ticked.
மேலும் வழிகாட்டிகள் 10
அனைத்தையும் காட்டு (10)
- Infurnia நூலகத்தில் ஏற்கனவே என்ன உள்ளது என்பதைச் சரிபார்க்கவும்Infurnia நூலகத்தில் எந்த லேமினேட்டுகள், விளிம்பு பட்டைகள் மற்றும் இரும்புச் சாமான்கள் உள்ளமைந்துள்ளன, மேலும் எந்த லேமினேட் ஃபினிஷ்கள் உங்கள் சொந்த பட்டியல் உருப்படிகளுக்குப் பதிலாக Infurnia இயல்புநிலைகள் என்பதை அறிக.
- பட்டியல் உருப்படிகளின் விலைகளைத் திருத்துதல், மொத்தமாகவும் உட்படபட்டியல் உருப்படிகளின் இயல்புநிலை விலையை ஒவ்வொன்றாகவோ பதிவிறக்கிய பட்டியல் விரிதாள் வழியாக மொத்தமாகவோ அமைக்கவும் அல்லது மாற்றவும், மேலும் ஒரு விற்பனை சேனல் எப்போது அதைப் பின்பற்றுவதை நிறுத்துகிறது என்பதைப் புரிந்துகொள்ளவும்.
- Add connector cards at admin levelAdd connector cards at admin level so hardware with full dimensions appears in production output.
- Check the default edge profile variants in the catalogueBoth edge profile variants, with handle and without handle, are included in the catalogue by default.
- Fix a missing price: check price-type attachment and user assignmentFind out why a price or item does not appear for a sales channel by checking the price type's channel attachment and the user's assignment.
- Rename global connector names per accountRename global connectors such as the double-panel and minifix connectors for one account when the client's standards differ from the global standard.
- Set autoscaling for models and ready-made-width itemsDecide when a model needs autoscaling enabled and when fixed ready-made-width items like wire baskets need it switched off.
- Set procurement length and unit for profilesDefine how long a profile or long-length hardware is and in which unit it is bought, so per-length pricing and rounding work.
- Store and validate manufacturing details JSONKeep the manufacturing details property as valid JSON so machining contours and drills are applied when the hardware is placed.
- Turning on 'use default price' discards any values entered in the same saveLearn what happens to entered values, formulas and channel-specific settings when you turn on the link to the default price.