하드웨어 카탈로그
가이드: 117
- 서랍 레일과 같은 하드웨어 하위 카테고리 추가하드웨어 카테고리 아래에 새 하위 카테고리를 만들어 서랍 레일과 같은 하드웨어 품목을 카탈로그에 추가하세요.
- 관리자 제조 설정에서 중복 하드웨어 카드 교체관리자 제조 설정에서 중복 하드웨어 항목을 찾고, 각 카드가 어디에 사용되는지 확인한 뒤, 디자인에서 선택할 수 있도록 하드웨어 항목을 라이브러리에 추가하세요.
- 셔터 시스템 구성에서 셔터 기구 하드웨어 추가가스 리프트업이나 롤링 셔터 기구 같은 셔터 기구를 추가하고 셔터 시스템 구성에서 사용하면 가격 산정과 BOQ에 반영됩니다.
- 카탈로그에 누락된 하드웨어와 자재 추가가격 책정이나 설계에 사용하기 전에 admin portal에서 Add hardware, 코어 자재, 마감 자재를 추가하세요.
- 카탈로그에서 탠덤 서랍 하드웨어 정리하기서랍 시스템 카테고리에서 탠덤 서랍 하드웨어를 관리하고 브랜드 또는 유형별로 하위 카테고리로 나누세요.
- 카탈로그의 서랍 세트에 채널 추가하기카탈로그의 서랍 세트 정의에 채널을 추가하면 모든 서랍에 표시됩니다.
- Add hardware 및 SKU 수준의 액세서리 가격 책정Advanced Pricing의 판매 채널 아래에 하드웨어와 액세서리를 추가하여 SKU별로 가격을 책정하세요.
- admin portal을(를) 통한 Add hardware 항목admin portal에서 창고 및 카탈로그 드롭다운 메뉴를 탐색하여 Add hardware 항목을 추가하세요.
- admin portal에서 바구니, 풀아웃, 옷걸이봉을 찾으세요admin portal에서 바구니 및 풀아웃 옵션과 옷걸이봉을 찾아 카탈로그에 추가할 수 있습니다.
- 새 하드웨어 항목에 드릴링 데이터 재사용모든 드릴을 수동으로 입력하는 대신 유사한 창고 항목에서 제조 세부 정보를 복사하십시오.
- 카탈로그에 유틸리티 하드웨어 항목 추가카탈로그 하드웨어의 새 유틸리티 그룹 아래에 푸시투오픈 장치와 같은 유틸리티 하드웨어 항목을 추가하세요.
- 서랍 레일 및 탠덤 서랍 추가서랍 레일 및 탠덤 서랍을 다운로드한 다음, 디자인에서 복제하여 장착하세요.
- 수직 패널 없이 도어가 캐비닛 몸체 패널과 만나는 경우 제로 크랭크 힌지를 선택하세요수직 패널 없이 도어가 캐비닛 몸체 패널과 만나는 경우에는 제로 크랭크(풀 오버레이) 힌지를 사용하세요.
- 파일 단위, 서랍 세트 및 하드웨어를 올바른 위치에 배치단위, 서랍 세트 및 하드웨어 SKU를 올바른 카테고리와 그룹에 배치하여 디자이너가 찾을 수 있게 하십시오.
- 매장 SKU가 없는 자동 생성 패널 처리매장 SKU가 없는 자동 생성 패널이 무엇인지, 그리고 이를 별도로 가격 책정하는 방법을 알아보세요.
- 라미네이트 코드 없이 문과 창호 자재를 처리하기문과 창호에는 라미네이트 코드나 이와 유사한 카탈로그 코드가 필요하지 않으므로, 코드 없이 처리하고 해당 자재를 별도로 가져올 수 있습니다.
- 하드웨어 카탈로그와 하드웨어 가격 책정이 함께 작동하는 방식하드웨어 카탈로그가 하드웨어 품목과 폴더를 보관하고, 가격 책정 영역에서 해당 품목에 단가를 입력하는 방식을 알아보세요.
- 캐비닛당 경첩 수량 계산 방법캐비닛당 경첩 수량이 높이 기준 규칙을 따르는 방식과 카탈로그에서 이를 설정하는 방법을 알아보세요.
- 기본 힌지 SKU가 존재한 후에만 하드웨어를 연결하십시오푸시투오픈 메커니즘과 같은 하드웨어가 연결할 기준점을 가질 수 있도록 먼저 카탈로그에 기본 힌지 SKU를 생성하십시오.
- 디자인에 캐비닛을 배치하면 수량이 자동으로 추가되도록 하드웨어를 연결합니다하드웨어 항목을 연결하면 디자인에 캐비닛을 배치할 때마다 필요한 수량이 자동으로 추가됩니다.
- 판매 채널 필터로 창고 결과 범위 좁히기Add From Warehouse에서 브랜드 스토어를 선택하면 해당 브랜드의 모델만 가져옵니다.
- 골라 손잡이와 엣지 프로파일이 어디에 부착되는지 이해하기손잡이 프로파일 설정에서 골라 손잡이와 엣지 프로파일이 몸체에 고정되는지 셔터에 고정되는지 알아보세요.
- Add finger groove hardware to a shutter design from the catalogueAdd the required groove from the admin hardware catalogue before using it in a shutter design.
- 셔터 구성 전에 손잡이 없는 프로파일, 손잡이 프로파일 및 유리를 추가하십시오.셔터 시스템 구성에서 매핑하기 전에 셔터 시스템에 필요한 프로파일과 유리 유형을 설정하십시오.
- Approximate a tall unit with a wicker basketBuild a tall unit with a wicker basket by starting from a bottom drawer, adding a basket, applying the wicker material and turning off the fascia.
- 하드웨어 항목을 복제하고 채널의 드릴 깊이를 0으로 설정admin portal의 창고에서 새 하드웨어 브랜드를 추가합니다.
- 하드웨어 변형을 별도 항목 또는 드롭다운 옵션으로 그룹화하드웨어 변형을 별도의 카탈로그 항목으로 표시할지, 하나의 항목 아래 드롭다운에서 선택하는 옵션으로 표시할지 결정합니다.
- 기본 경첩 이름을 브랜드에 맞게 변경관리자 커넥터 카드에서 소프트웨어에 표시되는 기본 경첩 이름을 특정 브랜드에 맞게 변경하세요.
- 디자인에 손잡이와 기타 액세서리 추가기본 라이브러리 또는 창고에서 손잡이를 배치하고, 인출 유닛의 액세서리 유형을 전환합니다.
- Add hardware 옵션을 SKU로 만들고 변형별로 표시 이미지 지정셔터 기구와 같은 Add hardware 옵션을 관리자에서 SKU로 추가하고, 각 변형에 고유한 표시 이미지를 지정하여 디자이너가 변형을 구별하고 올바른 것을 선택할 수 있게 하세요.
- 카탈로그 Utilities 섹션에 푸시 오픈 하드웨어 추가카탈로그 하드웨어의 Utilities 섹션에 푸시 오픈 기구를 추가하며, 이미지 업로드도 포함합니다.
- 프로파일을 손잡이 또는 비손잡이로 분류디자이너가 카탈로그에서 손잡이 프로파일과 비손잡이 프로파일을 바로 선택할 수 있도록 각 프로파일에 손잡이 유형을 지정하세요.
- admin portal에서 하드웨어 하위 카테고리 생성 및 주문서랍 시스템 브랜드와 같은 하드웨어 하위 카테고리를 생성하고, 표시 순서를 제어하며, 더 이상 필요 없는 항목을 삭제하세요.
- Find a hardware item by finish and item numberOpen Catalog Hardware, narrow the list by finish, then open the subcategory and search the item number to find a specific hardware component.
- 품번, 이름 및 높이로 하드웨어 찾기품번/모델 번호로 하드웨어를 조회하고, 일치하는 항목이 없으면 이름과 높이로 다시 찾으세요.
- 창고에 더 이상 표시되지 않는 하드웨어 항목 찾기추가된 SKU와 사용 중단된 그룹이 항목을 창고 목록에서 제외하는 이유와, 대신 어디에서 찾을 수 있는지 알아보세요.
- 하드웨어 선택이 설계자 기반인지 또는 자동인지카탈로그에서의 두 가지 하드웨어 선택 방식과 자동 생성이 무엇에 의존하는지 알아보세요.
- 하드웨어 라이브러리 항목을 카테고리 간에 이동카테고리 또는 하위 카테고리 간에 이동할 수 있는 하드웨어 라이브러리 항목과 먼저 복제해야 하는 항목을 알아보세요.
- 카탈로그에서 이름으로 하드웨어를 검색하고 바로 이름을 변경하세요이름이나 코드로 특정 하드웨어 항목을 찾아 카탈로그에서 바로 이름을 변경할 수 있습니다.
- 하드웨어의 표시 단위와 조달 세트 크기 설정하드웨어가 올바른 구매 단위로 집계되고 청구되도록 표시 단위와 조달 세트 크기를 선택하세요.
- 두께와 라미네이션 속성으로 하드웨어 심재 설정SKU와 마감재에 연결할 수 있도록 하드웨어 심재의 두께와 라미네이션을 정의하세요.
- 경첩 헤드 드릴을 제외한 마킹 드릴을 직경 5mm, 깊이 1mm로 설정하십시오경첩 헤드 드릴은 더 큰 직경으로 두고, 마킹 드릴을 직경 5mm, 깊이 1mm로 설정하십시오.
- BOQ 및 가격 책정에서 바구니와 풀아웃 하드웨어 이해하기바구니와 풀아웃 하드웨어 항목이 절단 목록이나 생산에 영향을 주지 않고 BOQ 및 가격 책정에 어떻게 사용되는지 알아보세요.
- 미니픽스, 더블, 힌지가 캐비닛과 어떻게 연결되는지 이해합니다미니픽스, 더블, 힌지는 캐비닛과 함께 기본으로 추가됩니다.
- admin portal을 통해 3D 셔터 및 손잡이 모델 업로드admin portal을 통해 3D 셔터 및 사용자 정의 손잡이 모델을 업로드하여 카탈로그에 추가하세요.
- Add kitchen drawers and channels under the right hardware categoriesAdd kitchen drawers under the drawer systems hardware category and telescopic or quadro channels under the drawer channels category.
- Add or remove a handle at panel level via edit panelManage handles at panel level instead of only at partition level, attaching a handle SKU and setting the panel type and finishes.
- Configure drawer channel hardware without a size per entryConfigure drawer channels so that one hardware entry covers every channel length instead of creating a separate entry for each size.
- Confirm sales channel updates when publishing a bulk editPublish a bulk edit with a newly mapped sales channel by confirming the update, and check CSV uploads against the attempt's own download before anything is sent.
- Control which catalogue items a designer sees with sales channelsKeep catalogue categories and SKUs separate between locations or channels by assigning designers to the right sales channels.
- Copy hardware from catalogue and rebrand generic connectorsLearn that the default dowel is a generic connector.
- 카탈로그에서 브랜드의 판매 채널 생성Infurnia 카탈로그에서 브랜드의 판매 채널을 생성하고 업데이트합니다.
- Create a separate sales channel to build and test a new catalogueAssign the new channel only to the people working on the pricing and quotation, not to designers.
- Delete a sales channel blocked by existing subscriptionsClear the subscriber block on a sales channel so its deletion passes the subscriber check, either by unsubscribing every subscribing org or by switching the channel from public to private.
- Find a hardware item by its codeLocate the right hardware entry by code and fix a search that returns nothing.
- Fix a channel price that is wrong on tax or display unitRecognise a seeded custom channel price and correct it instead of editing the default price.
- Fix a hardware depth that does not applyChange the depth on the hardware entry, reload and re-add it, then check the drawer-level setting if it still does not take.
- How G profile handles reduce shutter heightLearn why adding a G profile handle to a shutter requires a height reduction and how to configure that deduction in the catalogue.
- 비즈니스 단위 전반에서 채널 구독이 작동하는 방식공개 판매 채널 구독이 전체 조직과 새 비즈니스 단위에 어떻게 적용되는지 알아보세요.
- How drawer channel width comes from the purchased hardware SKULearn why the drawer channel width follows the hardware SKU you actually purchase rather than the 3D model in the design.
- How hardware quantities are outputHardware such as screws is specified and output in exact numbers, not as packets or boxes, so a design needing 278 screws reports 278 screws.
- How the Selling Price is calculated in Pricing (Sales Channel)See how the Default Price section adds tax to the default price to show the Selling Price, and how panel and shutter pricing options work.
- How warehouse hardware drawer systems are listedLearn that hardware drawer systems added from the warehouse show their dimensions in millimetres rather than inches.
- Isolate a hardware family with catalogue filtersUse a filter to isolate a specific hardware family, such as drawer systems, instead of viewing all hardware items together.
- Keep hardware systems owned and apply silver option settingsLearn how cloning and deletion of models supports managing hardware variants.
- Link cloned hinge connectors to the card in Manufacturing SettingsAfter cloning a hinge connector, link it back to the card in Manufacturing Settings so the clone takes effect.
- Locate minifix connectors under Catalog > Hardware > ConnectorsOpen the Catalog module and navigate to Hardware > Connectors to find minifix connectors.
- 카탈로그에서 서랍 레일 깊이 설정admin portal의 카탈로그에서 서랍 레일 깊이를 선택하면 서랍 깊이가 그에 맞게 조정됩니다.
- Set drawer hardware panel requirementsCapture the bottom panel, back panel and channel values that drawer hardware drives, and understand how channel width and depth are used.
- Specify only panels and hardware in scenariosSpecify just the two panels and the hardware in a scenario, since spacing and similar parameters need not be entered.
- Supply CAM details when adding hardwareAdd CAM details to hardware when drilling is required.
- Understand the subscription request lifecycle for sales channelsFollow a sales channel subscription request from submission through auto-approval or manual review to its final state, and learn how to undo an approved subscription.
- Unmap sales channels to hide unused catalogue items from designersUnmap an item's sales channel to stop designers from seeing unused or unwanted catalogue items, and restore the mapping later if the item is needed again.
- 구독한 채널의 SKU를 카탈로그로 가져오기채널이 공개 공유되고 구독이 승인되면, 구독한 판매 채널의 SKU를 자신의 조직 또는 사업부에 추가하세요.
- CSV로 하드웨어 SKU 및 판매 채널 일괄 편집창고에서 하드웨어를 필터링하여 추가한 다음, CSV 다운로드를 사용하여 개별 SKU, 판매 채널, 가격, 마진 및 세금을 일괄 편집하세요.
- 가격 및 판매 채널 일괄 편집선택한 SKU의 가격과 판매 채널을 변경합니다. 하드웨어 SKU와 판매 채널이 매핑되지 않은 SKU도 포함됩니다.
- 캐비닛을 복제하지 않고 캐비닛의 재질과 손잡이 변경이미 있는 캐비닛을 복제하는 대신 재질이나 손잡이를 교체하세요.
- 유리 카탈로그의 glass 항목에 유리를 저장하세요가격 책정에 사용할 수 있도록 유리 카탈로그의 glass 항목에 유리를 저장하세요.
- 커넥터 아래 하드웨어 카탈로그에 나사 SKU를 추가하십시오.커넥터 아래 하드웨어 카탈로그에 나사 SKU를 만든 다음, 새 그룹으로 복제하여 더 많은 사이즈를 추가하십시오.
- 디자인에서 보이도록 카탈로그 하드웨어의 그룹 스트립 조명을 복제하세요.복제한 그룹 스트립 조명을 카탈로그 하드웨어에 저장한 다음, 디자인 설정에서 캐시를 새로 고쳐 변경 사항이 디자인에 나타나도록 하세요.
- 각 하드웨어 유형에 대해 별도의 카테고리 만들기서랍 시스템, 채널, 경첩이 design portal에서 분리되어 유지되도록 각 하드웨어 유형에 자체 카테고리를 부여하세요.
- 심재와 철물에 대한 카테고리별 품목 목록 생성심재와 철물 아래에서 카테고리를 선택하면 카탈로그가 해당 카테고리의 품목 목록을 생성합니다.
- 편집 속성을 통해 SKU를 하드웨어에 연결액세서리 SKU를 하드웨어 항목에 첨부하면 해당 SKU가 그 하드웨어와 함께 표시됩니다.
- 하드웨어와 함께 설계된 캐비닛 구조를 카탈로그에 게시캐비닛 구조를 게시하면 재사용할 수 있게 되고 셔터 메커니즘 하드웨어가 자동으로 함께 저장됩니다.
- 하드웨어 그룹을 판매 채널 매핑 및 가격과 함께 복제하드웨어 그룹을 같은 카테고리의 대상 하위 카테고리로 복사하며, 선택적으로 판매 채널 매핑과 가격을 함께 가져와 복제된 SKU가 디자이너에게 계속 표시되도록 합니다.
- 하드웨어 항목을 복제하여 새 부품으로 설정하드웨어 항목을 복제하고, 복제본의 이름을 변경하고, 새 부품에 맞게 추가 속성을 업데이트한 뒤, 경첩을 hardware-hinges 카테고리에 배치해야 사용할 수 있습니다.
- 새 부품을 추가하려면 하드웨어 항목을 복제하세요라이브러리에 없는 하드웨어 항목은 비슷한 항목을 복제하고 복제본을 조정하여 추가하세요.
- 소유하지 않은 창고 하드웨어 항목을 해당 그룹으로 복제소유하지 않은 것으로 표시된 창고 하드웨어 항목을 기존 그룹으로 복제하면 복사본이 고객의 카탈로그에 속하며 편집할 수 있습니다.
- 핸들 프로파일이 없는 브랜드의 핸들 모델링 방법일부 브랜드는 도어 프로파일만 사용하고 핸들을 별도의 나사 체결 부품으로 부착하는 방식을 알아보세요.
- 하위/구성 SKU 가격이 판매 채널 전반에서 결정되는 방식하위 또는 구성 SKU가 사용자의 컨텍스트에서 어떤 가격을 적용받는지 결정하는 상속 단계를 따라가십시오.
- 제약 조건과 규칙이 자재, 마감, 가격 책정 및 하드웨어를 제어하는 방식제약 조건과 규칙이 어떤 자재와 마감이 결합되는지, 가격 책정이 어떻게 작동하는지, 하드웨어와 마감이 어떻게 자동으로 적용되는지 알아보세요.
- Publish SKUs to a sales channel and understand silent filteringLearn why publishing SKUs to a channel silently drops SKUs that are not in inventory and skips duplicates, and how removal behaves differently.
- Bulk edit SKUs across sales channels in the catalogueSelect your SKUs, choose the editing mode, tick the sales channels, then apply the change to all selected SKUs before publishing.
- Capture brand, SKU name and article number for hardwareRecord the brand name, SKU name and article number for hardware components and put screw diameter and depth in the item name so every part is identifiable in the catalogue.
- Change a SKU's unit via admin portal sales channel pricingChange the unit of a catalogue SKU such as edgeband without altering the overall project unit.
- Check presence in cabinets for a hardware cardFind out whether a hardware card is actually used in any cabinet before removing a duplicate.
- Clone a SKU to create a new hardware sizeCreate an additional hardware size by copying an existing SKU and changing its name and model number.
- Clone a connector card to create a new hardware connectorConfigure panel one and panel two drills together in the same connector card so a cloned card carries both.
- Clone a handle, pull-out or channel variantCreate a new handle, pull-out or channel variant by cloning an existing SKU and renaming the clone.
- Clone glass and hardware rather than building from scratchPrefer cloning an existing warehouse SKU for glass and hardware so the new item behaves correctly.
- Create a new group for a hardware variant in the catalogueGive a hardware variant its own group when it does not fit an existing one, so you can clone its SKUs into it.
- How shutter core, edgeband and handle settings affect cabinetsLearn how a chosen shutter core, the Edgeband panel types and a handle's Shutter Height Reduction change the cabinets you place.
- Refresh SKU cache to restore global hardware in old designsRun a refresh SKU cache on old designs so they pull in the hardware logic originally set for the account.
- 브랜드의 판매 채널을 구독하여 해당 브랜드의 항목을 추가하세요해당 브랜드의 판매 채널을 구독하여 브랜드 하드웨어 또는 디자인을 카탈로그에 추가하세요.
- 판매 채널 가격을 변경하지 않고 CSV로 기본 가격 업데이트판매 채널 가격은 그대로 두고 CSV로 각 SKU의 기본 가격 레코드를 일괄 업데이트합니다.
- Use clone group to copy hardware into your own folderCopy hardware items from the Infurnia library into your own folder with the clone group shortcut instead of recreating them.
- Use the Clone Sales channel mapping and Prices checkbox in bulk cloneTick the header checkbox to select every SKU's sales channel mapping and prices at once, and read its indeterminate state when only some rows are ticked.
다른 가이드 10
모두 보기 (10)
- Infurnia 라이브러리에 이미 포함된 항목 확인Infurnia 라이브러리에 기본으로 포함된 라미네이트, 엣지 밴딩, 하드웨어와 고객님의 카탈로그 항목이 아닌 Infurnia 기본 마감재를 알아보세요.
- 카탈로그 항목 가격 편집(대량 편집 포함)다운로드한 카탈로그 스프레드시트를 통해 카탈로그 항목의 기본 가격을 하나씩 또는 대량으로 설정하거나 변경하고, 판매 채널이 언제 기본 가격을 따르지 않게 되는지 이해합니다.
- Add connector cards at admin levelAdd connector cards at admin level so hardware with full dimensions appears in production output.
- Check the default edge profile variants in the catalogueBoth edge profile variants, with handle and without handle, are included in the catalogue by default.
- Fix a missing price: check price-type attachment and user assignmentFind out why a price or item does not appear for a sales channel by checking the price type's channel attachment and the user's assignment.
- Rename global connector names per accountRename global connectors such as the double-panel and minifix connectors for one account when the client's standards differ from the global standard.
- Set autoscaling for models and ready-made-width itemsDecide when a model needs autoscaling enabled and when fixed ready-made-width items like wire baskets need it switched off.
- Set procurement length and unit for profilesDefine how long a profile or long-length hardware is and in which unit it is bought, so per-length pricing and rounding work.
- Store and validate manufacturing details JSONKeep the manufacturing details property as valid JSON so machining contours and drills are applied when the hardware is placed.
- Turning on 'use default price' discards any values entered in the same saveLearn what happens to entered values, formulas and channel-specific settings when you turn on the link to the default price.