金物カタログ
ガイド:117
- 引き出しレールなどの金物サブカテゴリを追加する金物カテゴリの下に新しいサブカテゴリを作成すると、引き出しレールなどの金物アイテムをカタログに追加できます。
- 管理用の製造設定から重複した金物カードを置き換える管理用の製造設定で重複した金物の項目を探し、各カードがどこで使用されているかを確認し、金物の項目をライブラリに追加してデザインで選択できるようにします。
- シャッターシステム構成にシャッター機構金物を追加するガス昇降式や巻き上げ式シャッター機構などのシャッター機構を追加し、シャッターシステム構成で使用すると、価格計算とBOQに反映されます。
- カタログに不足している金物と材料を追加する価格設定や設計に使用する前に、Add hardware、芯材、仕上げ材をadmin portalに追加してください。
- カタログでタンデム引き出し金物を整理するタンデム引き出し金物は引き出しシステムカテゴリで管理し、ブランドまたは種類ごとにサブカテゴリへ分けます。
- カタログの引き出しセットにチャンネルを追加するカタログの引き出しセット定義にチャンネルを追加すると、すべての引き出しに表示されます。
- Add hardwareとSKU単位の付属品価格設定Advanced Pricingの販売チャネルの下で追加して、SKUの金物と付属品の価格を設定します。
- admin portalでAdd hardware項目admin portalで倉庫とカタログのドロップダウンメニューをたどってAdd hardware項目を表示します。
- admin portalでバスケット、引き出し式収納、ハンガーポールを探すadmin portalでバスケットと引き出し式収納のオプション、ハンガーポールを探し、カタログに追加できます。
- 新しい金物アイテムにドリル加工データを再利用するすべてのドリル加工を手入力する代わりに、類似した倉庫アイテムから製造詳細をコピーします。
- カタログにユーティリティ金物を追加するカタログ金物の新しいユーティリティグループに、プッシュオープン機構などのユーティリティ金物を追加します。
- 引き出しレールとタンデム引き出しを追加する引き出しレールとタンデム引き出しをダウンロードし、デザインに複製して取り付けてください。
- 側板に扉が当たる場合のゼロクランクヒンジの選択扉が縦の側板のないキャビネット本体の板に当たる場合は、ゼロクランク(フルオーバーレイ)ヒンジを使用します。
- File units, drawer sets and hardware in the right placePlace units, drawer sets and hardware SKUs in the correct category and group so designers can find them.
- Handle auto-created panels with no store SKULearn what auto-created panels without a store SKU are and how to price them separately.
- ラミネートコードなしでドアと窓の素材を扱うドアと窓にはラミネートコードや同様のカタログコードは不要なため、コードなしで扱い、素材を別途インポートできます。
- ハードウェアカタログとハードウェア価格設定の連携方法ハードウェアカタログがハードウェア品目とフォルダを保持し、価格エリアでそれらの品目に単価を入力する仕組みを説明します。
- キャビネット1台あたりのヒンジ数量の計算方法キャビネット1台あたりのヒンジ数量が高さに基づくルールに従う仕組みと、カタログでの設定方法を説明します。
- ベースヒンジSKUが存在する場合にのみ、金物をリンクしてくださいプッシュオープン機構などの金物をリンクする参照先とするため、まずカタログでベースヒンジSKUを作成してください。
- キャビネットをデザインに配置したときに数量が自動で追加されるように金物をリンクするキャビネットをデザインに配置するたびに、必要な数量が自動で追加されるように金物項目をリンクします。
- 販売チャネルフィルターで倉庫の検索結果を絞り込むAdd From Warehouse でブランドストアを選択すると、そのブランドのモデルのみが取得されます。
- ゴラハンドルとエッジプロファイルがどこに取り付くかを理解するハンドルプロファイル設定で、ゴラハンドルとエッジプロファイルがキャーカスと扉のどちらに固定されるかを確認します。
- カタログの扉デザインに指掛け金物を追加する扉デザインで使用する前に、管理者用金物カタログから必要な溝を追加してください。
- Add non-handle, handle profiles and glass before shutter configurationSet up the profiles and glass types your shutter system needs before you map them in a shutter system configuration.
- 籐かご付きのトールユニットを近似する最下部の引き出しから始めて、かごを追加し、籐素材を適用し、幕板をオフにすることで、籐かご付きのトールユニットを作成します。
- ハードウェア項目を複製し、チャンネルの穴あけ深さをゼロにするadmin portalの倉庫から新しいハードウェアブランドを追加します。
- ハードウェアバリエーションを個別の項目またはドロップダウンオプションとしてグループ化するハードウェアバリエーションを別々のカタログ項目として表示するか、1つの項目の下のドロップダウンから選択するオプションとして表示するかを決めます。
- 既定のヒンジ名をブランドに合わせて変更する管理画面の接続金具カードで、ソフトウェアに表示される既定のヒンジ名を特定のブランドに合わせて変更できます。
- デザインに取っ手やその他の付属品を追加するデフォルトライブラリまたはウェアハウスから取っ手を配置し、引き出しユニットの付属品タイプを切り替えます。
- Add hardware options as SKUs with a display image per variantAdd hardware options such as shutter mechanisms in admin as SKUs and give each variant its own display image so designers can tell them apart and choose the correct one.
- カタログのユーティリティセクションにプッシュオープン金物を追加するカタログ金物のユーティリティセクションにプッシュオープン機構を追加します。その画像のアップロードも含みます。
- プロファイルを取っ手用または取っ手なしとして分類するデザイナーがカタログから取っ手用プロファイルと取っ手なしプロファイルを直接選べるよう、各プロファイルに取っ手タイプを設定します。
- Create and order hardware subcategories in admin portalCreate hardware subcategories such as drawer-system brands, control the order they appear, and delete ones you no longer need.
- 仕上げと品番で金物を見つけるCatalog Hardware を開き、仕上げで一覧を絞り込み、サブカテゴリを開いて品番を検索すると、特定の金物部品が見つかります。
- 品番、名称、高さで金物を検索金物は品番/型番で検索し、一致しない場合は名称と高さで検索してください。
- 倉庫に表示されなくなったハードウェア品目を探す追加済みのSKUや非推奨のグループが倉庫の一覧に品目を表示させない理由と、代わりにどこで探せるかを説明します。
- ハードウェアの選択がデザイナーによるものか自動かについてカタログにおける2種類のハードウェア選択と、自動生成が何に依存するかを学びます。
- ハードウェアライブラリのアイテムをカテゴリ間で移動するハードウェアライブラリのアイテムのうち、カテゴリまたはサブカテゴリ間で移動できるものと、先に複製する必要があるものを確認します。
- カタログ内でハードウェアを名前で検索し、直接名前を変更する特定のハードウェア品目を名前またはコードで見つけ、カタログ内で直接名前を変更できます。
- ハードウェアの表示単位と調達セットサイズを設定するハードウェアが正しい購入単位で集計・課金されるよう、表示単位と調達セットサイズを選択してください。
- 厚さとラミネーション特性を指定してハードウェアの芯材を設定するハードウェアの芯材を厚さとラミネーションとともに定義すると、SKUや仕上げ材に紐付けられるようになります。
- ヒンジ頭用以外のマーキング用ドリルを直径5 mm、深さ1 mmに設定しますマーキング用ドリルは直径5 mm、深さ1 mmに設定し、ヒンジ頭用ドリルはより大きな直径のままにします。
- BOQと価格設定におけるバスケットおよび引き出し金物の理解バスケットおよび引き出し金物の項目が、カットリストや生産に影響を与えずにBOQと価格設定にどのように使用されるかを学びます。
- ミニフィックス、ダブル、ヒンジがキャビネットにどのようにリンクするかを理解するミニフィックス、ダブル、ヒンジはキャビネットとともにデフォルトで追加されます。
- admin portalから3D扉・取手モデルをアップロードするadmin portalからアップロードして、3D扉モデルとカスタム取手モデルをカタログに追加します。
- Add kitchen drawers and channels under the right hardware categoriesAdd kitchen drawers under the drawer systems hardware category and telescopic or quadro channels under the drawer channels category.
- Add or remove a handle at panel level via edit panelManage handles at panel level instead of only at partition level, attaching a handle SKU and setting the panel type and finishes.
- Configure drawer channel hardware without a size per entryConfigure drawer channels so that one hardware entry covers every channel length instead of creating a separate entry for each size.
- Confirm sales channel updates when publishing a bulk editPublish a bulk edit with a newly mapped sales channel by confirming the update, and check CSV uploads against the attempt's own download before anything is sent.
- Control which catalogue items a designer sees with sales channelsKeep catalogue categories and SKUs separate between locations or channels by assigning designers to the right sales channels.
- Copy hardware from catalogue and rebrand generic connectorsLearn that the default dowel is a generic connector.
- Create a sales channel for a brand in the catalogueCreate and update a sales channel for a brand in the Infurnia catalogue.
- Create a separate sales channel to build and test a new catalogueAssign the new channel only to the people working on the pricing and quotation, not to designers.
- Delete a sales channel blocked by existing subscriptionsClear the subscriber block on a sales channel so its deletion passes the subscriber check, either by unsubscribing every subscribing org or by switching the channel from public to private.
- Find a hardware item by its codeLocate the right hardware entry by code and fix a search that returns nothing.
- Fix a channel price that is wrong on tax or display unitRecognise a seeded custom channel price and correct it instead of editing the default price.
- Fix a hardware depth that does not applyChange the depth on the hardware entry, reload and re-add it, then check the drawer-level setting if it still does not take.
- How G profile handles reduce shutter heightLearn why adding a G profile handle to a shutter requires a height reduction and how to configure that deduction in the catalogue.
- ビジネスユニット間でのチャネルサブスクリプションの仕組み公開販売チャネルへのサブスクライブが組織全体および新しいビジネスユニットにどのように適用されるかを説明します。
- How drawer channel width comes from the purchased hardware SKULearn why the drawer channel width follows the hardware SKU you actually purchase rather than the 3D model in the design.
- How hardware quantities are outputHardware such as screws is specified and output in exact numbers, not as packets or boxes, so a design needing 278 screws reports 278 screws.
- How the Selling Price is calculated in Pricing (Sales Channel)See how the Default Price section adds tax to the default price to show the Selling Price, and how panel and shutter pricing options work.
- How warehouse hardware drawer systems are listedLearn that hardware drawer systems added from the warehouse show their dimensions in millimetres rather than inches.
- Isolate a hardware family with catalogue filtersUse a filter to isolate a specific hardware family, such as drawer systems, instead of viewing all hardware items together.
- Keep hardware systems owned and apply silver option settingsLearn how cloning and deletion of models supports managing hardware variants.
- Link cloned hinge connectors to the card in Manufacturing SettingsAfter cloning a hinge connector, link it back to the card in Manufacturing Settings so the clone takes effect.
- Locate minifix connectors under Catalog > Hardware > ConnectorsOpen the Catalog module and navigate to Hardware > Connectors to find minifix connectors.
- カタログから引き出しレールの奥行きを設定するadmin portalのカタログから引き出しレールの奥行きを選択すると、引き出しの奥行きがそれに合わせて調整されます。
- Set drawer hardware panel requirementsCapture the bottom panel, back panel and channel values that drawer hardware drives, and understand how channel width and depth are used.
- Specify only panels and hardware in scenariosSpecify just the two panels and the hardware in a scenario, since spacing and similar parameters need not be entered.
- Supply CAM details when adding hardwareAdd CAM details to hardware when drilling is required.
- Understand the subscription request lifecycle for sales channelsFollow a sales channel subscription request from submission through auto-approval or manual review to its final state, and learn how to undo an approved subscription.
- Unmap sales channels to hide unused catalogue items from designersUnmap an item's sales channel to stop designers from seeing unused or unwanted catalogue items, and restore the mapping later if the item is needed again.
- 購読中のチャネルからSKUをカタログに取り込むチャネルが公開共有され、購読が承認されたら、購読中の販売チャネルから自社の組織または事業単位にSKUを追加できます。
- CSVによるハードウェアSKUと販売チャネルの一括編集倉庫からハードウェアを絞り込んで追加し、CSVのダウンロードを使って個々のSKU、販売チャネル、価格、マージン、税を一括編集します。
- Bulk edit prices and sales channelsChange prices and sales channels across selected SKUs, including hardware SKUs and SKUs with no mapped sales channel.
- キャビネットを複製せずに材質と取っ手を変更するSwap the material or handle on cabinets you already have instead of duplicating them.
- ガラスは、ハードウェアカタログのガラスの下に登録します価格設定で使用できるように、ガラスはハードウェアカタログのガラスの下に登録します。
- Add a screw SKU in the hardware catalogue under connectorsCreate a screw SKU in the hardware catalogue under connectors, then clone it into a new group to add more sizes.
- カタログハードウェアのグループストリップライトを複製して、デザインで表示できるようにします複製したグループストリップライトをカタログハードウェアに保存し、デザイン設定でキャッシュを更新すると、変更がデザインに反映されます。
- ハードウェアの種類ごとに個別のカテゴリを作成するdesign portal内で引き出しシステム、チャンネル、ヒンジが分かれたままになるよう、ハードウェアの種類ごとに専用のカテゴリを設定します。
- 芯材と金物のカテゴリー別品目リストを生成する芯材と金物の下でカテゴリーを選択すると、カタログがそのカテゴリーの品目リストを生成します。
- 編集プロパティからSKUをハードウェアにリンクするアクセサリーSKUをハードウェア項目に紐付けると、そのSKUがそのハードウェアと一緒に表示されます。
- 金物を含めて設計したキャビネットの構造をカタログに公開するキャビネットの構造を公開すると、再利用可能になり、扉の機構の金物も自動的に引き継がれます。
- 販売チャネルマッピングと価格を含めてハードウェアグループを複製するハードウェアグループを同じカテゴリ内の複製先サブカテゴリにコピーします。必要に応じて販売チャネルマッピングと価格も引き継ぎ、複製したSKUがデザイナーに表示されるようにします。
- ハードウェア項目を複製し、新しい部品として設定するハードウェア項目を複製し、複製した項目の名前を変更し、新しい部品に合わせて追加プロパティを更新します。ヒンジは使用前にハードウェア-ヒンジカテゴリの下に配置してください。
- ハードウェア項目を複製して新しい部品を追加するライブラリにないハードウェア項目は、類似の項目を複製して複製品を調整することで追加します。
- 所有されていない倉庫ハードウェア品目をそのグループに複製する所有されていないと表示される倉庫ハードウェア品目を既存のグループに複製すると、そのコピーはクライアントのカタログに属し、編集できるようになります。
- ハンドルプロファイルのないブランドでのハンドルのモデリング方法一部のブランドでは、扉プロファイルのみを使用し、ハンドルを別部品としてネジ止めする方法を説明します。
- 子/コンポーネントSKUの価格が販売チャネル間でどのように解決されるかお客様のコンテキストで子またはコンポーネントSKUがどの価格を採用するかを決める継承の階層に従ってください。
- 制約とルールが素材、仕上げ、価格設定、金物をどのように制御するか制約とルールが、どの素材と仕上げを組み合わせられるか、価格設定がどのように動作するか、金物と仕上げが自動的にどのように適用されるかを学びます。
- Publish SKUs to a sales channel and understand silent filteringLearn why publishing SKUs to a channel silently drops SKUs that are not in inventory and skips duplicates, and how removal behaves differently.
- Bulk edit SKUs across sales channels in the catalogueSelect your SKUs, choose the editing mode, tick the sales channels, then apply the change to all selected SKUs before publishing.
- Capture brand, SKU name and article number for hardwareRecord the brand name, SKU name and article number for hardware components and put screw diameter and depth in the item name so every part is identifiable in the catalogue.
- Change a SKU's unit via admin portal sales channel pricingChange the unit of a catalogue SKU such as edgeband without altering the overall project unit.
- Check presence in cabinets for a hardware cardFind out whether a hardware card is actually used in any cabinet before removing a duplicate.
- Clone a SKU to create a new hardware sizeCreate an additional hardware size by copying an existing SKU and changing its name and model number.
- Clone a connector card to create a new hardware connectorConfigure panel one and panel two drills together in the same connector card so a cloned card carries both.
- Clone a handle, pull-out or channel variantCreate a new handle, pull-out or channel variant by cloning an existing SKU and renaming the clone.
- Clone glass and hardware rather than building from scratchPrefer cloning an existing warehouse SKU for glass and hardware so the new item behaves correctly.
- Create a new group for a hardware variant in the catalogueGive a hardware variant its own group when it does not fit an existing one, so you can clone its SKUs into it.
- How shutter core, edgeband and handle settings affect cabinetsLearn how a chosen shutter core, the Edgeband panel types and a handle's Shutter Height Reduction change the cabinets you place.
- Refresh SKU cache to restore global hardware in old designsRun a refresh SKU cache on old designs so they pull in the hardware logic originally set for the account.
- ブランドの販売チャネルを購読してそのアイテムを追加するブランドの販売チャネルを購読すると、そのブランドのハードウェアやデザインをカタログに追加できます。
- CSVで販売チャネル価格を変更せずにデフォルト価格を更新する販売チャネル価格を変更せずに、CSVで各SKUのデフォルト価格レコードを一括更新します。
- Use clone group to copy hardware into your own folderCopy hardware items from the Infurnia library into your own folder with the clone group shortcut instead of recreating them.
- Use the Clone Sales channel mapping and Prices checkbox in bulk cloneTick the header checkbox to select every SKU's sales channel mapping and prices at once, and read its indeterminate state when only some rows are ticked.
その他のガイド 10
すべて表示(10)
- Infurniaライブラリに既に含まれている内容を確認するInfurniaライブラリに標準で組み込まれているラミネート、エッジバインディング、金物と、お客様自身のカタログ項目ではなくInfurniaのデフォルトであるラミネート仕上げについて説明します。
- カタログ品目の価格を編集する(一括編集を含む)カタログ品目のデフォルト価格を、1件ずつ、またはダウンロードしたカタログのスプレッドシートで一括して設定・変更する方法と、販売チャネルがその価格に従わなくなるタイミングについて説明します。
- Add connector cards at admin levelAdd connector cards at admin level so hardware with full dimensions appears in production output.
- Check the default edge profile variants in the catalogueBoth edge profile variants, with handle and without handle, are included in the catalogue by default.
- Fix a missing price: check price-type attachment and user assignmentFind out why a price or item does not appear for a sales channel by checking the price type's channel attachment and the user's assignment.
- Rename global connector names per accountRename global connectors such as the double-panel and minifix connectors for one account when the client's standards differ from the global standard.
- Set autoscaling for models and ready-made-width itemsDecide when a model needs autoscaling enabled and when fixed ready-made-width items like wire baskets need it switched off.
- Set procurement length and unit for profilesDefine how long a profile or long-length hardware is and in which unit it is bought, so per-length pricing and rounding work.
- Store and validate manufacturing details JSONKeep the manufacturing details property as valid JSON so machining contours and drills are applied when the hardware is placed.
- Turning on 'use default price' discards any values entered in the same saveLearn what happens to entered values, formulas and channel-specific settings when you turn on the link to the default price.