હાર્ડવેર કેટલોગ
માર્ગદર્શિકાઓ: 117
- ડ્રોઅર ચેનલ જેવી હાર્ડવેર ઉપશ્રેણી ઉમેરોહાર્ડવેર શ્રેણી હેઠળ નવી ઉપશ્રેણી બનાવો જેથી તમે ડ્રોઅર ચેનલ જેવી હાર્ડવેર વસ્તુઓ તમારા કેટલોગમાં ઉમેરી શકો.
- એડમિન મેન્યુફેક્ચરિંગ સેટિંગ્સ દ્વારા ડુપ્લિકેટ હાર્ડવેર કાર્ડ બદલોએડમિન મેન્યુફેક્ચરિંગ સેટિંગ્સમાં ડુપ્લિકેટ હાર્ડવેર એન્ટ્રીઓ શોધો, દરેક કાર્ડ ક્યાં વપરાય છે તે તપાસો, અને હાર્ડવેર આઇટમ્સ લાઇબ્રેરીમાં ઉમેરો જેથી તે ડિઝાઇનમાં પસંદ કરી શકાય.
- શટર સિસ્ટમ કન્સ્ટ્રક્શન હેઠળ શટર મિકેનિઝમ હાર્ડવેર ઉમેરોગેસ લિફ્ટ-અપ અથવા રોલિંગ શટર મિકેનિઝમ જેવા શટર મિકેનિઝમ ઉમેરો અને શટર સિસ્ટમ કન્સ્ટ્રક્શનમાં તેનો ઉપયોગ કરો, જેથી પ્રાઇસિંગ અને BOQ અનુસરે.
- કેટલોગમાં ખૂટતા હાર્ડવેર અને મટીરિયલ્સ ઉમેરોપ્રાઇસિંગ કે ડિઝાઇનિંગ કરતાં પહેલાં admin portal માં કોર મટીરિયલ્સ અને ફિનિશ મટીરિયલ્સ Add hardware.
- કેટલોગમાં ટેન્ડમ ડ્રોઅર હાર્ડવેર ગોઠવોડ્રોઅર સિસ્ટમ કેટેગરી હેઠળ ટેન્ડમ ડ્રોઅર હાર્ડવેરનું સંચાલન કરો અને તેને બ્રાન્ડ અથવા પ્રકાર પ્રમાણે ઉપકેટેગરીઓમાં વિભાજિત કરો.
- કેટલોગમાં ડ્રોઅર સેટમાં ચેનલ ઉમેરોકેટલોગમાં ડ્રોઅર સેટની વ્યાખ્યામાં ચેનલ ઉમેરો જેથી તે દરેક ડ્રોઅર પર દેખાય.
- Add hardware અને એસકેયુ સ્તરે એસેસરી પ્રાઇસિંગAdvanced Pricing માં સેલ્સ ચેનલ હેઠળ ઉમેરીને એસકેયુ પર હાર્ડવેર અને એસેસરીનો ભાવ નક્કી કરો.
- admin portal દ્વારા Add hardware આઇટમ્સadmin portal માં વેરહાઉસ અને કેટલોગ ડ્રોપડાઉન મેનૂમાં નેવિગેટ કરીને Add hardware આઇટમ્સ.
- admin portal માં બાસ્કેટ, પુલ-આઉટ અને હેંગર રોડ શોધોadmin portal માં બાસ્કેટ અને પુલ-આઉટ વિકલ્પો તથા હેંગર રોડ શોધો, જેથી તમે તેમને તમારા કેટલોગમાં ઉમેરી શકો.
- નવી હાર્ડવેર આઇટમ માટે ડ્રિલિંગ ડેટાનો પુનઃઉપયોગ કરોદરેક ડ્રિલ જાતે દાખલ કરવાને બદલે સમાન વેરહાઉસ આઇટમમાંથી ઉત્પાદન વિગતો કૉપિ કરો.
- કેટલોગમાં યુટિલિટી હાર્ડવેર આઇટમ ઉમેરોકેટલોગ હાર્ડવેરમાં નવા યુટિલિટીઝ જૂથ હેઠળ પુશ-ટુ-ઓપન મિકેનિઝમ જેવી યુટિલિટી હાર્ડવેર આઇટમ ઉમેરો.
- ડ્રોઅર ચેનલ અને ટેન્ડમ ડ્રોઅર ઉમેરોડ્રોઅર ચેનલ અને ટેન્ડમ ડ્રોઅર ડાઉનલોડ કરો, પછી તેમને તમારા ડિઝાઇનમાં ક્લોન કરીને ફિટ કરો.
- કાર્કાસ પેનલ સાથે મળતા શટર માટે ઝીરો-ક્રેન્ક હિન્જ પસંદ કરોજ્યારે શટર કોઈ ઊભી પેનલ વગર કાર્કાસ પેનલ સાથે મળે ત્યારે ઝીરો-ક્રેન્ક (ફુલ ઓવરલે) હિન્જ વાપરો.
- ફાઇલ એકમો, ડ્રોઅર સેટ અને હાર્ડવેર યોગ્ય જગ્યાએએકમો, ડ્રોઅર સેટ અને હાર્ડવેર SKU ને યોગ્ય કેટેગરી અને ગ્રુપમાં મૂકો જેથી ડિઝાઇનર્સ તેમને શોધી શકે.
- સ્ટોર SKU વગરના ઓટો-ક્રિએટેડ પેનલ માટે હેન્ડલસ્ટોર SKU વગરના ઓટો-ક્રિએટેડ પેનલ શું છે અને તેમને અલગથી કિંમત કેવી રીતે આપવી તે જાણો.
- લેમિનેટ કોડ વગર દરવાજા અને બારીની સામગ્રી સંભાળોદરવાજા અને બારીને લેમિનેટ કોડ કે એવા કોઈ કેટલોગ કોડની જરૂર નથી, તેથી તમે તેમને કોડ વગર સંભાળી શકો છો અને તેમની સામગ્રી અલગથી આયાત કરી શકો છો.
- હાર્ડવેર કેટલોગ અને હાર્ડવેર પ્રાઇસિંગ કેવી રીતે સાથે કામ કરે છેજાણો કે હાર્ડવેર કેટલોગ તમારા હાર્ડવેર આઇટમ્સ અને ફોલ્ડર્સ કેવી રીતે રાખે છે, જ્યારે પ્રાઇસિંગ વિભાગમાં તે આઇટમ્સ સામે દર દાખલ કરવામાં આવે છે.
- કેબિનેટ દીઠ હિન્જની સંખ્યા કેવી રીતે ગણવામાં આવે છેકેબિનેટ દીઠ હિન્જની સંખ્યા ઊંચાઈ-આધારિત નિયમને કેવી રીતે અનુસરે છે અને કેટલોગમાં તેને કેવી રીતે ગોઠવવું તે જાણો.
- બેઝ હિન્જ SKU અસ્તિત્વમાં આવે તે પછી જ હાર્ડવેર લિંક કરોપહેલા કેટલોગમાં બેઝ હિન્જ SKU બનાવો, જેથી પુશ-ટુ-ઓપન મિકેનિઝમ જેવા હાર્ડવેરને લિંક કરવા માટે સંદર્ભ બિંદુ મળે.
- હાર્ડવેરને લિંક કરો જેથી ડિઝાઇનમાં કેબિનેટ સાથે જથ્થો આપમેળે ઉમેરાયહાર્ડવેર આઇટમ્સને લિંક કરો જેથી ડિઝાઇનમાં કેબિનેટ મૂકતાં જ જરૂરી જથ્થો આપમેળે ઉમેરાય.
- સેલ્સ-ચેનલ ફિલ્ટર વડે વેરહાઉસના પરિણામો સંકુચિત કરોAdd From Warehouse માં બ્રાન્ડ સ્ટોર પસંદ કરો જેથી ફક્ત તે બ્રાન્ડના મોડેલ ફેચ થાય.
- ગોલા હેન્ડલ અને એજ પ્રોફાઇલ ક્યાં જોડાય છે તે સમજોહેન્ડલ પ્રોફાઇલ સેટઅપમાં ગોલા હેન્ડલ અને એજ પ્રોફાઇલ કાર્કસ પર ફિક્સ થાય છે કે શટર પર, તે જાણો.
- કેટલોગમાંથી શટર ડિઝાઇનમાં ફિંગર ગ્રૂવ હાર્ડવેર ઉમેરોશટર ડિઝાઇનમાં વાપરતા પહેલાં એડમિન હાર્ડવેર કેટલોગમાંથી જરૂરી ગ્રૂવ ઉમેરો.
- શટર કન્ફિગરેશન પહેલાં નોન-હેન્ડલ, હેન્ડલ પ્રોફાઇલ અને કાચ ઉમેરોતમારી શટર સિસ્ટમને જરૂરી પ્રોફાઇલ અને કાચના પ્રકારો શટર સિસ્ટમ કન્ફિગરેશનમાં મેપ કરતાં પહેલાં સેટ કરો.
- વિકર બાસ્કેટ સાથે ઊંચું યુનિટ અંદાજોનીચેની ડ્રોઅરથી શરૂ કરીને, બાસ્કેટ ઉમેરીને, વિકર મટીરિયલ લાગુ કરીને અને ફેસિયા બંધ કરીને વિકર બાસ્કેટ સાથે ઊંચું યુનિટ બનાવો.
- હાર્ડવેર આઇટમ્સની ક્લોન બનાવો અને ચેનલો માટે ડ્રિલ ઊંડાઈ શૂન્ય કરોadmin portal માં વેરહાઉસમાંથી નવી હાર્ડવેર બ્રાન્ડ ઉમેરો.
- હાર્ડવેર વેરિયન્ટને અલગ એન્ટ્રી તરીકે અથવા ડ્રોપડાઉન વિકલ્પો તરીકે ગ્રુપ કરોનક્કી કરો કે હાર્ડવેર વેરિયન્ટ અલગ કેટલોગ એન્ટ્રી તરીકે દેખાય છે કે એક એન્ટ્રી હેઠળના ડ્રોપડાઉનમાંથી પસંદ કરેલા વિકલ્પો તરીકે.
- બ્રાન્ડ સાથે મેળ ખાય તે માટે ડિફોલ્ટ હિન્જ નામોનું નામ બદલોચોક્કસ બ્રાન્ડ સાથે મેળ ખાય તે માટે એડમિન કનેક્ટર કાર્ડમાં સોફ્ટવેરમાં દેખાતા ડિફોલ્ટ હિન્જ નામોનું નામ બદલો.
- ડિઝાઇનમાં હેન્ડલ અને અન્ય એક્સેસરીઝ ઉમેરોડિફોલ્ટ લાઇબ્રેરી અથવા વેરહાઉસમાંથી હેન્ડલ મૂકો અને પુલ-આઉટ યુનિટનો એક્સેસરી પ્રકાર બદલો.
- Add hardware વિકલ્પો SKU તરીકે, દરેક વેરિઅન્ટ માટે એક ડિસ્પ્લે ઇમેજ સાથેએડમિનમાં શટર મિકેનિઝમ જેવા Add hardware વિકલ્પો SKU તરીકે ઉમેરો અને દરેક વેરિઅન્ટને તેની પોતાની ડિસ્પ્લે ઇમેજ આપો, જેથી ડિઝાઇનર્સ તેમને અલગ પાડી શકે અને યોગ્ય વેરિઅન્ટ પસંદ કરી શકે.
- કેટલોગના Utilities વિભાગમાં પુશ-ટુ-ઓપન હાર્ડવેર ઉમેરોકેટલોગ હાર્ડવેરના Utilities વિભાગમાં પુશ-ટુ-ઓપન મિકેનિઝમ ઉમેરો, જેમાં તેની ઇમેજ અપલોડ કરવાનો સમાવેશ થાય છે.
- પ્રોફાઇલને હેન્ડલ અથવા નોન-હેન્ડલ તરીકે વર્ગીકૃત કરોદરેક પ્રોફાઇલને હેન્ડલ પ્રકાર આપો જેથી ડિઝાઇનરો કેટલોગમાંથી સીધા જ હેન્ડલ અને નોન-હેન્ડલ પ્રોફાઇલ પસંદ કરી શકે.
- admin portal માં હાર્ડવેર ઉપશ્રેણીઓ બનાવો અને ઓર્ડર કરોડ્રોઅર-સિસ્ટમ બ્રાન્ડ જેવી હાર્ડવેર ઉપશ્રેણીઓ બનાવો, તે કયા ક્રમમાં દેખાય તે નિયંત્રિત કરો અને હવે જરૂરી ન હોય તેવી ઉપશ્રેણીઓ ડિલીટ કરો.
- ફિનિશ અને આઇટમ નંબર દ્વારા હાર્ડવેર આઇટમ શોધોCatalog Hardware ખોલો, ફિનિશ દ્વારા યાદી સાંકડી કરો, પછી સબકેટેગરી ખોલો અને ચોક્કસ હાર્ડવેર કમ્પોનન્ટ શોધવા માટે આઇટમ નંબર શોધો.
- લેખ નંબર, નામ અને ઊંચાઈ દ્વારા હાર્ડવેર શોધોહાર્ડવેરને તેના લેખ/મોડેલ નંબર દ્વારા શોધો, અને કંઈ મળે નહીં તો નામ અને ઊંચાઈ દ્વારા શોધો.
- વેરહાઉસમાં હવે ન દેખાતી હાર્ડવેર વસ્તુઓ શોધોઉમેરાયેલા SKU અને નિવૃત્ત જૂથો કેમ વસ્તુઓને વેરહાઉસની યાદીમાંથી બહાર રાખે છે અને તેમને બીજે ક્યાં શોધવી તે જાણો.
- હાર્ડવેર પસંદગી ડિઝાઇનર-આધારિત છે કે સ્વયંસંચાલિતકેટલોગમાં હાર્ડવેર પસંદગીના બે પ્રકારો અને સ્વયંસંચાલિત જનરેશન શેના પર આધાર રાખે છે તે જાણો.
- હાર્ડવેર લાઇબ્રેરીના આઇટમને કેટેગરીઓ વચ્ચે ખસેડોહાર્ડવેર લાઇબ્રેરીના કયા આઇટમને કેટેગરી કે સબકેટેગરી વચ્ચે ખસેડી શકાય છે અને કયાને પહેલા ક્લોન કરવું પડે તે જાણો.
- કેટલોગમાં હાર્ડવેરને નામ દ્વારા શોધો અને તેને સીધું નામ બદલોહાર્ડવેર આઇટમને તેના નામ અથવા કોડ દ્વારા શોધો જેથી તમે કેટલોગમાં તેનું નામ સીધું બદલી શકો.
- Set display unit and procurement set size for hardwareChoose the display unit and procurement set size so hardware is counted and charged as the right purchasable unit.
- થિકનેસ અને લેમિનેશન ગુણધર્મો સાથે હાર્ડવેર કોર મટીરિયલ સેટ કરોહાર્ડવેર કોર મટીરિયલને તેની થિકનેસ અને લેમિનેશન સાથે વ્યાખ્યાયિત કરો, જેથી તેને SKU અને ફિનિશ સાથે લિંક કરી શકાય.
- હિન્જ હેડ સિવાય માર્કિંગ ડ્રિલ 5 mm વ્યાસ અને 1 mm ઊંડાઈ પર સેટ કરોતમારી માર્કિંગ ડ્રિલ 5 mm વ્યાસ અને 1 mm ઊંડાઈ પર સેટ કરો, જ્યારે હિન્જ હેડ ડ્રિલને તેના મોટા વ્યાસ પર જ રહેવા દો.
- BOQ અને પ્રાઇસિંગમાં બાસ્કેટ અને પુલ-આઉટ હાર્ડવેર સમજોબાસ્કેટ અને પુલ-આઉટ હાર્ડવેર આઇટમ્સ કટ લિસ્ટ કે ઉત્પાદનને અસર કર્યા વિના BOQ અને પ્રાઇસિંગ માટે કેવી રીતે વપરાય છે તે જાણો.
- Understand how mini-fixes, doubles and hinges link to cabinetsMini-fixes, doubles and hinges are added by default with cabinets.
- admin portal દ્વારા 3D શટર અને હેન્ડલ મોડેલ અપલોડ કરોadmin portal દ્વારા અપલોડ કરીને કેટલોગમાં 3D શટર અને કસ્ટમ હેન્ડલ મોડેલ ઉમેરો.
- Add kitchen drawers and channels under the right hardware categoriesAdd kitchen drawers under the drawer systems hardware category and telescopic or quadro channels under the drawer channels category.
- Add or remove a handle at panel level via edit panelManage handles at panel level instead of only at partition level, attaching a handle SKU and setting the panel type and finishes.
- Configure drawer channel hardware without a size per entryConfigure drawer channels so that one hardware entry covers every channel length instead of creating a separate entry for each size.
- Confirm sales channel updates when publishing a bulk editPublish a bulk edit with a newly mapped sales channel by confirming the update, and check CSV uploads against the attempt's own download before anything is sent.
- Control which catalogue items a designer sees with sales channelsKeep catalogue categories and SKUs separate between locations or channels by assigning designers to the right sales channels.
- Copy hardware from catalogue and rebrand generic connectorsLearn that the default dowel is a generic connector.
- કેટલોગમાં બ્રાન્ડ માટે સેલ્સ ચેનલ બનાવોInfurnia કેટલોગમાં બ્રાન્ડ માટે સેલ્સ ચેનલ બનાવો અને અપડેટ કરો.
- Create a separate sales channel to build and test a new catalogueAssign the new channel only to the people working on the pricing and quotation, not to designers.
- Delete a sales channel blocked by existing subscriptionsClear the subscriber block on a sales channel so its deletion passes the subscriber check, either by unsubscribing every subscribing org or by switching the channel from public to private.
- Find a hardware item by its codeLocate the right hardware entry by code and fix a search that returns nothing.
- Fix a channel price that is wrong on tax or display unitRecognise a seeded custom channel price and correct it instead of editing the default price.
- Fix a hardware depth that does not applyChange the depth on the hardware entry, reload and re-add it, then check the drawer-level setting if it still does not take.
- How G profile handles reduce shutter heightLearn why adding a G profile handle to a shutter requires a height reduction and how to configure that deduction in the catalogue.
- બિઝનેસ યુનિટ્સમાં ચેનલ સબ્સ્ક્રિપ્શન્સ કેવી રીતે કાર્ય કરે છેજાણો કે પબ્લિક સેલ્સ ચેનલ પર સબ્સ્ક્રાઇબ કરવું તમારી સમગ્ર સંસ્થા અને નવા બિઝનેસ યુનિટ્સ પર કેવી રીતે લાગુ પડે છે.
- How drawer channel width comes from the purchased hardware SKULearn why the drawer channel width follows the hardware SKU you actually purchase rather than the 3D model in the design.
- How hardware quantities are outputHardware such as screws is specified and output in exact numbers, not as packets or boxes, so a design needing 278 screws reports 278 screws.
- How the Selling Price is calculated in Pricing (Sales Channel)See how the Default Price section adds tax to the default price to show the Selling Price, and how panel and shutter pricing options work.
- How warehouse hardware drawer systems are listedLearn that hardware drawer systems added from the warehouse show their dimensions in millimetres rather than inches.
- Isolate a hardware family with catalogue filtersUse a filter to isolate a specific hardware family, such as drawer systems, instead of viewing all hardware items together.
- Keep hardware systems owned and apply silver option settingsLearn how cloning and deletion of models supports managing hardware variants.
- Link cloned hinge connectors to the card in Manufacturing SettingsAfter cloning a hinge connector, link it back to the card in Manufacturing Settings so the clone takes effect.
- Locate minifix connectors under Catalog > Hardware > ConnectorsOpen the Catalog module and navigate to Hardware > Connectors to find minifix connectors.
- કેટલોગમાંથી ડ્રોઅર ચેનલની ઊંડાઈ સેટ કરોડ્રોઅરની ઊંડાઈ મેળ ખાય તે રીતે ગોઠવવા માટે admin portal માં કેટલોગમાંથી ડ્રોઅર ચેનલની ઊંડાઈ પસંદ કરો.
- Set drawer hardware panel requirementsCapture the bottom panel, back panel and channel values that drawer hardware drives, and understand how channel width and depth are used.
- Specify only panels and hardware in scenariosSpecify just the two panels and the hardware in a scenario, since spacing and similar parameters need not be entered.
- Supply CAM details when adding hardwareAdd CAM details to hardware when drilling is required.
- Understand the subscription request lifecycle for sales channelsFollow a sales channel subscription request from submission through auto-approval or manual review to its final state, and learn how to undo an approved subscription.
- Unmap sales channels to hide unused catalogue items from designersUnmap an item's sales channel to stop designers from seeing unused or unwanted catalogue items, and restore the mapping later if the item is needed again.
- સબ્સ્ક્રાઇબ કરેલી ચેનલમાંથી SKU તમારા કેટલોગમાં ખેંચોચેનલ જાહેરમાં શેર થઈ ગયા પછી અને તમારું સબ્સ્ક્રિપ્શન મંજૂર થયા પછી, સબ્સ્ક્રાઇબ કરેલી સેલ્સ ચેનલમાંથી SKU તમારા પોતાના ઓર્ગ અથવા બિઝનેસ યુનિટમાં ઉમેરો.
- CSV દ્વારા હાર્ડવેર SKU અને સેલ્સ ચેનલનું બલ્ક એડિટ કરોવેરહાઉસમાંથી હાર્ડવેર ફિલ્ટર કરીને ઉમેરો, પછી CSV ડાઉનલોડનો ઉપયોગ કરીને વ્યક્તિગત SKU, સેલ્સ ચેનલ, કિંમત, માર્જિન અને ટેક્સનું બલ્ક એડિટ કરો.
- બલ્ક ભાવ અને સેલ્સ ચેનલ્સ એડિટ કરોપસંદ કરેલા SKU-માં ભાવ અને સેલ્સ ચેનલ્સ બદલો, જેમાં હાર્ડવેર SKU અને કોઈ મેપ કરેલી સેલ્સ ચેનલ ન હોય તેવા SKUનો સમાવેશ થાય છે.
- કેબિનેટની સામગ્રી અને હેન્ડલ બદલો, કેબિનેટની નકલ કર્યા વિનાતમારી પાસે પહેલેથી હાજર કેબિનેટની નકલ કરવાને બદલે તેમની સામગ્રી કે હેન્ડલ બદલો.
- હાર્ડવેર કેટલોગમાં ગ્લાસ હેઠળ ગ્લાસ સંગ્રહિત કરોહાર્ડવેર કેટલોગમાં ગ્લાસ હેઠળ ગ્લાસ સંગ્રહિત કરો જેથી તે પ્રાઇસિંગ માટે ઉપલબ્ધ થાય.
- કનેક્ટર્સ હેઠળ હાર્ડવેર કેટલોગમાં સ્ક્રૂ SKU ઉમેરોકનેક્ટર્સ હેઠળ હાર્ડવેર કેટલોગમાં સ્ક્રૂ SKU બનાવો, પછી વધુ સાઇઝ ઉમેરવા માટે તેને નવા જૂથમાં ક્લોન કરો.
- કેટલોગ હાર્ડવેરમાં ગ્રુપ સ્ટ્રિપ લાઇટનું ક્લોન બનાવો જેથી તે ડિઝાઇનમાં દેખાય.કેટલોગ હાર્ડવેરમાં ક્લોન કરેલી ગ્રુપ સ્ટ્રિપ લાઇટ સાચવો, પછી ડિઝાઇન સેટિંગ્સમાં કેશ રિફ્રેશ કરો જેથી ફેરફાર ડિઝાઇનમાં દેખાય.
- દરેક હાર્ડવેર પ્રકાર માટે અલગ કેટેગરી બનાવોદરેક હાર્ડવેર પ્રકારને તેની પોતાની કેટેગરી આપો જેથી ડ્રો સિસ્ટમ, ચેનલ અને હિન્જ design portal માં અલગ રહે.
- કોર મટીરિયલ અને હાર્ડવેર માટે કેટેગરી-વિશિષ્ટ આઇટમ લિસ્ટ બનાવોકોર મટીરિયલ અને હાર્ડવેર હેઠળ કેટેગરી પસંદ કરો, જેથી કેટલોગ તે કેટેગરી માટે આઇટમ લિસ્ટ બનાવે.
- એડિટ પ્રોપર્ટીઝ દ્વારા SKU ને હાર્ડવેર સાથે લિંક કરોએક એસેસરી SKU ને હાર્ડવેર આઇટમ સાથે જોડો જેથી તે SKU તે હાર્ડવેર સાથે દેખાય.
- હાર્ડવેર સાથે કેબિનેટ કન્સ્ટ્રક્શન કેટલોગમાં પ્રકાશિત કરોકેબિનેટ કન્સ્ટ્રક્શન પ્રકાશિત કરો જેથી તે ફરી વાપરી શકાય અને તેનું શટર મિકેનિઝમ હાર્ડવેર આપોઆપ સાથે આવે.
- હાર્ડવેર જૂથને તેના સેલ્સ ચેનલ મેપિંગ અને કિંમતો સાથે ક્લોન કરોહાર્ડવેર જૂથને એ જ કેટેગરીની ગંતવ્ય ઉપ-કેટેગરીમાં કૉપિ કરો, વૈકલ્પિક રીતે તેનું સેલ્સ-ચેનલ મેપિંગ અને કિંમતો સાથે લઈ જાઓ જેથી ક્લોન કરેલા SKU ડિઝાઇનરોને દેખાય રહે.
- હાર્ડવેર આઇટમનું ક્લોન બનાવો અને તેને નવા પાર્ટ તરીકે સેટ કરોહાર્ડવેર આઇટમનું ક્લોન બનાવો, ક્લોનનું નામ બદલો, નવા પાર્ટ સાથે મેળ ખાય તે માટે તેના વધારાના ગુણધર્મો અપડેટ કરો અને વાપરતા પહેલાં હિન્જીસને hardware-hinges કેટેગરી હેઠળ મૂકો.
- નવો ભાગ ઉમેરવા માટે હાર્ડવેર આઇટમનું ક્લોન બનાવોલાઇબ્રેરીમાં ન હોય તેવી હાર્ડવેર આઇટમ સમાન આઇટમનું ક્લોન બનાવીને અને ક્લોનમાં ફેરફાર કરીને ઉમેરો.
- માલિકી ન હોય તેવી વેરહાઉસ હાર્ડવેર આઇટમને તેના જૂથમાં ક્લોન કરોમાલિકી ન હોય તેમ દર્શાવતી વેરહાઉસ હાર્ડવેર આઇટમને તેના હાલના જૂથમાં ક્લોન કરો, જેથી નકલ ક્લાયન્ટના કેટલોગનો ભાગ બને અને તેને સંપાદિત કરી શકાય.
- હેન્ડલ પ્રોફાઇલ વગરની બ્રાન્ડ્સ હેન્ડલ કેવી રીતે મોડેલ કરે છેજાણો કે કેટલીક બ્રાન્ડ્સ ફક્ત શટર પ્રોફાઇલનો ઉપયોગ કરે છે અને હેન્ડલને અલગ સ્ક્રૂ કરેલા ભાગ તરીકે જોડે છે.
- બાળ/ઘટક SKU ના ભાવ વેચાણ ચેનલોમાં કેવી રીતે નક્કી થાય છેતમારા સંદર્ભમાં બાળ કે ઘટક SKU કયો ભાવ લે છે તે નક્કી કરતી વારસાઈ શ્રેણીને અનુસરો.
- કન્સ્ટ્રેન્ટ્સ અને નિયમો સામગ્રી, ફિનિશ, પ્રાઇસિંગ અને હાર્ડવેરને કેવી રીતે નિયંત્રિત કરે છેકન્સ્ટ્રેન્ટ્સ અને નિયમો કઈ સામગ્રી અને ફિનિશ સાથે મળે તે, પ્રાઇસિંગ કેવી રીતે વર્તે છે અને હાર્ડવેર તથા ફિનિશ આપોઆપ કેવી રીતે લાગુ થાય છે તે જાણો.
- SKU ને સેલ્સ ચેનલ પર પ્રકાશિત કરો અને સાયલન્ટ ફિલ્ટરિંગ સમજોચેનલ પર SKU પ્રકાશિત કરતી વખતે ઇન્વેન્ટરીમાં ન હોય તેવા SKU સાયલન્ટ રીતે કેમ છોડી દેવાય છે અને ડુપ્લિકેટ કેમ છોડી દેવાય છે, અને દૂર કરવાનું વર્તન કેવી રીતે અલગ છે તે જાણો.
- Bulk edit SKUs across sales channels in the catalogueSelect your SKUs, choose the editing mode, tick the sales channels, then apply the change to all selected SKUs before publishing.
- Capture brand, SKU name and article number for hardwareRecord the brand name, SKU name and article number for hardware components and put screw diameter and depth in the item name so every part is identifiable in the catalogue.
- Change a SKU's unit via admin portal sales channel pricingChange the unit of a catalogue SKU such as edgeband without altering the overall project unit.
- Check presence in cabinets for a hardware cardFind out whether a hardware card is actually used in any cabinet before removing a duplicate.
- Clone a SKU to create a new hardware sizeCreate an additional hardware size by copying an existing SKU and changing its name and model number.
- Clone a connector card to create a new hardware connectorConfigure panel one and panel two drills together in the same connector card so a cloned card carries both.
- Clone a handle, pull-out or channel variantCreate a new handle, pull-out or channel variant by cloning an existing SKU and renaming the clone.
- Clone glass and hardware rather than building from scratchPrefer cloning an existing warehouse SKU for glass and hardware so the new item behaves correctly.
- Create a new group for a hardware variant in the catalogueGive a hardware variant its own group when it does not fit an existing one, so you can clone its SKUs into it.
- How shutter core, edgeband and handle settings affect cabinetsLearn how a chosen shutter core, the Edgeband panel types and a handle's Shutter Height Reduction change the cabinets you place.
- Refresh SKU cache to restore global hardware in old designsRun a refresh SKU cache on old designs so they pull in the hardware logic originally set for the account.
- બ્રાન્ડના વેચાણ ચેનલને સબ્સ્ક્રાઇબ કરીને તેની આઇટમ્સ ઉમેરોતે બ્રાન્ડની વેચાણ ચેનલને સબ્સ્ક્રાઇબ કરીને તમારા કેટલોગમાં બ્રાન્ડેડ હાર્ડવેર અથવા ડિઝાઇન ઉમેરો.
- સેલ્સ-ચેનલ કિંમતો બદલ્યા વિના CSV દ્વારા ડિફોલ્ટ કિંમતો અપડેટ કરોસેલ્સ-ચેનલ કિંમતોને અસ્પર્શ રાખીને CSV વડે દરેક SKUનો ડિફોલ્ટ કિંમત રેકોર્ડ બલ્કમાં અપડેટ કરો.
- Use clone group to copy hardware into your own folderCopy hardware items from the Infurnia library into your own folder with the clone group shortcut instead of recreating them.
- Use the Clone Sales channel mapping and Prices checkbox in bulk cloneTick the header checkbox to select every SKU's sales channel mapping and prices at once, and read its indeterminate state when only some rows are ticked.
વધુ માર્ગદર્શિકાઓ 10
બધું બતાવો (10)
- Infurnia લાઇબ્રેરીમાં પહેલેથી શું છે તે તપાસોInfurnia લાઇબ્રેરીમાં કયા લેમિનેટ, એજ બાઇન્ડિંગ અને હાર્ડવેર પહેલેથી સામેલ છે અને કયા લેમિનેટ ફિનિશ તમારા પોતાના કેટલોગની એન્ટ્રીને બદલે Infurnia ડિફોલ્ટ છે તે જાણો.
- કેટલોગ આઇટમની કિંમતો સંપાદિત કરો, જેમાં બલ્કમાં પણ સમાવેશ થાય છેડાઉનલોડ કરેલ કેટલોગ સ્પ્રેડશીટ દ્વારા કેટલોગ આઇટમની ડિફોલ્ટ કિંમત એક-એક કરીને અથવા બલ્કમાં સેટ કરો અથવા બદલો, અને સમજો કે સેલ્સ ચેનલ ક્યારે તેને અનુસરવાનું બંધ કરે છે.
- Add connector cards at admin levelAdd connector cards at admin level so hardware with full dimensions appears in production output.
- Check the default edge profile variants in the catalogueBoth edge profile variants, with handle and without handle, are included in the catalogue by default.
- Fix a missing price: check price-type attachment and user assignmentFind out why a price or item does not appear for a sales channel by checking the price type's channel attachment and the user's assignment.
- Rename global connector names per accountRename global connectors such as the double-panel and minifix connectors for one account when the client's standards differ from the global standard.
- Set autoscaling for models and ready-made-width itemsDecide when a model needs autoscaling enabled and when fixed ready-made-width items like wire baskets need it switched off.
- Set procurement length and unit for profilesDefine how long a profile or long-length hardware is and in which unit it is bought, so per-length pricing and rounding work.
- Store and validate manufacturing details JSONKeep the manufacturing details property as valid JSON so machining contours and drills are applied when the hardware is placed.
- Turning on 'use default price' discards any values entered in the same saveLearn what happens to entered values, formulas and channel-specific settings when you turn on the link to the default price.