슬래브
가이드: 15
- Architecture 모듈을 통해 화강암 또는 석재 슬래브 추가Architecture 모듈에서 화강암 또는 석재 상판 슬래브를 배치한 다음, 높이를 설정하고, 위치에 스냅하고, 두께와 재질을 편집하세요.
- slab 도구를 사용하여 별도의 주방 플랫폼 만들기표준 캐비닛 열과 분리된 맞춤형 주방 플랫폼을 만드세요.
- slab 도구를 사용하여 세미 모듈러 주방 요소 또는 로프트를 만드세요slab 영역에 사각형을 그린 다음, 설정에서 바닥으로부터의 높이와 두께를 설정하세요.
- 2D 슬래브 외곽선으로 3D에서 슬래브 만들기2D에서 슬래브 외곽선을 그린 다음, 3D에서 높이, 두께, 타일 마감을 설정하세요.
- 천장 슬래브를 숨길 때 사라지는 바닥 슬래브 수정천장 슬래브와 바닥 슬래브는 모두 RCC 슬래브이므로 천장 슬래브를 숨기면 바닥 슬래브도 숨겨지는 이유를 알아보세요.
- Add a slab and set its shape, elevation, thickness and materialDraw a slab outline in the 2D sketcher, apply it, then select the slab to adjust its shape, elevation, thickness or material.
- Fix the non-zero area error when adding a slab, ceiling, roof, rail or tilingSlab, Add Ceiling, Roof, Rail and Tiling all open the 2D sketcher, where you draw a closed shape before applying.
- Set slab elevation from the ground floorPlace a slab at the height you want above the ground floor using the Elevation field in the slab tool.
- Understand how the Slab tool creates free-standing geometryLearn that a slab always comes in at the top and can be dropped down to the floor.
- 천장 높이에서 벽 높이와 슬래브 두께 설정천장의 높이를 읽고 같은 패널에서 슬래브 두께를 설정하여 주방 배치에 맞는 올바른 벽 높이를 정합니다.
- 둥근 형태에는 사용자 정의 패널 또는 건축 슬래브 도구를 사용하십시오표준 캐비닛으로는 생산에 넘길 수 없는 둥글거나 곡선인 요소는 사용자 정의 패널로 모델링하거나 건축 슬래브 도구에서 모델링하여 표현하십시오.
- RCC 슬래브에서 반자 천장 만들기천장을 추가한 다음 Create False Ceiling 옵션을 사용하여 반자 천장을 그리세요. Slabs 도구로 그린 슬래브에는 이 옵션이 없습니다.
- Add columns, beams and slabs from the architecture toolsPlace columns, beams and slabs on your floor plan and adjust their dimensions, end points, height and thickness.
- Apply flooring to a room and add an RCC slab using the slab toolChange the flooring pattern or material of a room afterwards.
- How a countertop backsplash changes the slab's back extensionLearn how switching on a countertop's Back drop sets Extension Options > Back to 40 and how to bring the slab edge back to the unit's back.