Slabs
Guides: 15
- Add a granite or stone slab via the Architecture modulePlace a granite or stone countertop slab in the Architecture module, then set its elevation, snap it into position and edit its thickness and material.
- Create a separate kitchen platform using the slab toolBuild a custom kitchen platform that stands apart from the standard cabinet run.
- Create semi-modular kitchen elements or lofts using the slab toolDraw a rectangle for the slab area, then set its height from the floor and its thickness in the settings.
- Create a slab in 3D from a 2D slab outlineDraw a slab outline in 2D, then set its elevation, thickness and tile finish in 3D.
- Fix a floor slab that disappears when you hide the ceiling slabLearn why hiding the ceiling slab also hides the floor slab, since ceiling and floor slabs are both RCC slabs.
- Add a slab and set its shape, elevation, thickness and materialDraw a slab outline in the 2D sketcher, apply it, then select the slab to adjust its shape, elevation, thickness or material.
- Fix the non-zero area error when adding a slab, ceiling, roof, rail or tilingSlab, Add Ceiling, Roof, Rail and Tiling all open the 2D sketcher, where you draw a closed shape before applying.
- Set slab elevation from the ground floorPlace a slab at the height you want above the ground floor using the Elevation field in the slab tool.
- Understand how the Slab tool creates free-standing geometryLearn that a slab always comes in at the top and can be dropped down to the floor.
- Set wall height and slab thickness from ceiling elevationEstablish the correct wall height for a kitchen layout by reading the ceiling's elevation and setting the slab thickness from the same panel.
- Use custom panel or architecture slab tool for rounded formsRepresent a rounded or curved element that a standard cabinet cannot carry into production by modelling it as a custom panel or in the architecture slab tool.
- Create a false ceiling from an RCC slabAdd a ceiling, then use its Create False Ceiling option to draft a false ceiling, since a slab drawn with the Slabs tool has no such option.
- Add columns, beams and slabs from the architecture toolsPlace columns, beams and slabs on your floor plan and adjust their dimensions, end points, height and thickness.
- Apply flooring to a room and add an RCC slab using the slab toolChange the flooring pattern or material of a room afterwards.
- How a countertop backsplash changes the slab's back extensionLearn how switching on a countertop's Back drop sets Extension Options > Back to 40 and how to bring the slab edge back to the unit's back.