स्लैब
गाइड: 15
- Architecture मॉड्यूल के माध्यम से ग्रेनाइट या पत्थर का स्लैब जोड़ेंArchitecture मॉड्यूल में ग्रेनाइट या पत्थर का काउंटरटॉप स्लैब रखें, फिर उसकी elevation सेट करें, उसे स्थिति में snap करें और उसकी thickness और material संपादित करें।
- slab tool का उपयोग करके एक अलग kitchen प्लेटफ़ॉर्म बनाएँएक कस्टम kitchen प्लेटफ़ॉर्म बनाएँ जो मानक कैबिनेट श्रेणी से अलग हो।
- slab tool का उपयोग करके semi-modular kitchen तत्व या loft बनाएँslab area के लिए एक आयत बनाएँ, फिर settings में floor से उसकी ऊँचाई और thickness सेट करें।
- 2D स्लैब आउटलाइन से 3D में स्लैब बनाएँDraw a slab outline in 2D, then set its elevation, thickness and tile finish in 3D.
- जब आप ceiling स्लैब छिपाते हैं तो गायब होने वाले floor स्लैब को ठीक करेंजानें कि ceiling स्लैब छिपाने से floor स्लैब भी क्यों छिप जाता है, क्योंकि ceiling और floor स्लैब दोनों RCC स्लैब हैं।
- स्लैब जोड़ें और उसका आकार, elevation, thickness और material सेट करें2D sketcher में स्लैब की रूपरेखा बनाएँ, उसे लागू करें, फिर उसका आकार, elevation, thickness या material बदलने के लिए स्लैब चुनें।
- Fix the non-zero area error when adding a slab, ceiling, roof, rail or tilingSlab, Add Ceiling, Roof, Rail and Tiling all open the 2D sketcher, where you draw a closed shape before applying.
- ground floor से slab की elevation सेट करेंslab tool में Elevation field का उपयोग करके ground floor से जिस ऊँचाई पर चाहें, वहाँ slab रखें।
- समझें कि Slab टूल मुक्त-स्थित geometry कैसे बनाता हैजानें कि slab हमेशा top पर आता है और इसे नीचे floor तक गिराया जा सकता है।
- Set wall height and slab thickness from ceiling elevationEstablish the correct wall height for a kitchen layout by reading the ceiling's elevation and setting the slab thickness from the same panel.
- गोल आकार के लिए custom panel या architecture slab tool का उपयोग करेंऐसे गोल या curved तत्व को, जिसे मानक कैबिनेट production में नहीं ले जा सकता, custom panel के रूप में या architecture slab tool में मॉडल करके दर्शाएँ।
- RCC slab से false ceiling बनाएँceiling जोड़ें, फिर false ceiling बनाने के लिए उसका Create False Ceiling विकल्प उपयोग करें, क्योंकि Slabs tool से बनाए गए slab में यह विकल्प नहीं होता।
- architecture tools से columns, beams और slabs जोड़ेंअपने floor plan पर columns, beams और slabs रखें और उनके dimension, end points, ऊँचाई और thickness समायोजित करें।
- किसी room में फ़्लोरिंग लगाएँ और slab टूल से RCC slab जोड़ेंबाद में किसी room का फ़्लोरिंग पैटर्न या material बदलें।
- काउंटरटॉप बैकस्प्लैश स्लैब के बैक extension को कैसे बदलता हैजानें कि काउंटरटॉप का Back drop चालू करने पर Extension Options > Back 40 पर सेट हो जाता है और स्लैब edge को unit के बैक पर कैसे वापस लाया जाए।