தளக்கட்டைகள்
வழிகாட்டிகள்: 15
- Architecture module மூலம் கிரானைட் அல்லது கல் ஸ்லாப் சேர்க்கவும்Architecture module-இல் கிரானைட் அல்லது கல் கவுண்டர்டாப் ஸ்லாப் வைத்து, அதன் elevation-ஐ அமைத்து, அதை சரியான இடத்தில் snap செய்து, அதன் தடிமன் மற்றும் material-ஐ திருத்தவும்.
- slab tool மூலம் தனி சமையலறை தளத்தை உருவாக்கவும்வழக்கமான cabinet வரிசையிலிருந்து தனித்து நிற்கும் தனிப்பயன் சமையலறை தளத்தை உருவாக்கவும்.
- Create semi-modular kitchen elements or lofts using the slab toolDraw a rectangle for the slab area, then set its height from the floor and its thickness in the settings.
- 2D ஸ்லாப் அவுட்லைனில் இருந்து 3D-இல் ஸ்லாப் உருவாக்கவும்2D-இல் ஸ்லாப் அவுட்லைனை வரைந்து, பின்னர் 3D-இல் அதன் உயரம், தடிமன் மற்றும் டைல் ஃபினிஷ்ஷை அமைக்கவும்.
- உச்சவிதானத் தகட்டை மறைக்கும்போது மறைந்துவிடும் தளத்தகட்டைச் சரிசெய்யவும்உச்சவிதானத் தகட்டும் தளத்தகட்டும் இரண்டும் RCC தகடுகள் என்பதால், உச்சவிதானத் தகட்டை மறைப்பது தளத்தகட்டையும் மறைப்பது ஏன் என்பதை அறிக.
- Add a slab and set its shape, elevation, thickness and materialDraw a slab outline in the 2D sketcher, apply it, then select the slab to adjust its shape, elevation, thickness or material.
- Fix the non-zero area error when adding a slab, ceiling, roof, rail or tilingSlab, Add Ceiling, Roof, Rail and Tiling all open the 2D sketcher, where you draw a closed shape before applying.
- Set slab elevation from the ground floorPlace a slab at the height you want above the ground floor using the Elevation field in the slab tool.
- Understand how the Slab tool creates free-standing geometryLearn that a slab always comes in at the top and can be dropped down to the floor.
- Set wall height and slab thickness from ceiling elevationEstablish the correct wall height for a kitchen layout by reading the ceiling's elevation and setting the slab thickness from the same panel.
- வட்டமான வடிவங்களுக்கு custom panel அல்லது architecture slab கருவியைப் பயன்படுத்தவும்ஒரு standard cabinet உற்பத்திக்கு எடுத்துச் செல்ல முடியாத வட்டமான அல்லது வளைந்த உறுப்பை, custom panel ஆக அல்லது architecture slab கருவியில் மாதிரியாக்கி உருவாக்கவும்.
- RCC ஸ்லாப்பில் இருந்து ஒரு தவறான கூரையை உருவாக்கவும்ஒரு கூரையைச் சேர்க்கவும், பின்னர் அதன் Create False Ceiling விருப்பத்தைப் பயன்படுத்தி ஒரு தவறான கூரையை வரையவும், ஏனெனில் Slabs கருவியால் வரையப்பட்ட ஸ்லாப்பில் அத்தகைய விருப்பம் இல்லை.
- Add columns, beams and slabs from the architecture toolsPlace columns, beams and slabs on your floor plan and adjust their dimensions, end points, height and thickness.
- Apply flooring to a room and add an RCC slab using the slab toolChange the flooring pattern or material of a room afterwards.
- How a countertop backsplash changes the slab's back extensionLearn how switching on a countertop's Back drop sets Extension Options > Back to 40 and how to bring the slab edge back to the unit's back.