ସ୍ଲାବ
ଗାଇଡ୍: 15
- ଆର୍କିଟେକ୍ଚର ମଡ୍ୟୁଲ ମାଧ୍ୟମରେ ଗ୍ରାନାଇଟ କିମ୍ବା ପଥର ସ୍ଲାବ ଯୋଡ଼ନ୍ତୁଆର୍କିଟେକ୍ଚର ମଡ୍ୟୁଲରେ ଏକ ଗ୍ରାନାଇଟ କିମ୍ବା ପଥର କାଉଣ୍ଟରଟପ ସ୍ଲାବ ରଖନ୍ତୁ, ତାପରେ ଏହାର ଉଚ୍ଚତା ସେଟ କରନ୍ତୁ, ଏହାକୁ ସ୍ଥାନରେ ସ୍ନାପ କରନ୍ତୁ ଏବଂ ଏହାର ମୋଟେଇ ଓ ସାମଗ୍ରୀ ସମ୍ପାଦନ କରନ୍ତୁ।
- ସ୍ଲାବ୍ ଟୁଲ୍ ବ୍ୟବହାର କରି ଏକ ଅଲଗା ରୋଷେଇଘର ପ୍ଲାଟଫର୍ମ ତିଆରି କରନ୍ତୁମାନକ କ୍ୟାବିନେଟ୍ ଧାଡ଼ିରୁ ଅଲଗା ରହୁଥିବା ଏକ କଷ୍ଟମ ରୋଷେଇଘର ପ୍ଲାଟଫର୍ମ ତିଆରି କରନ୍ତୁ।
- ସ୍ଲାବ୍ ଟୁଲ୍ ବ୍ୟବହାର କରି ସେମି-ମଡ୍ୟୁଲାର୍ ରୋଷେଇଘର ଉପାଦାନ କିମ୍ବା ଲଫ୍ଟ ତିଆରି କରନ୍ତୁସ୍ଲାବ୍ କ୍ଷେତ୍ର ପାଇଁ ଏକ ଆୟତକ୍ଷେତ୍ର ଆଙ୍କନ୍ତୁ, ତାପରେ ସେଟିଂସ୍ରେ ଏହାର ମାଳଠାରୁ ଉଚ୍ଚତା ଏବଂ ମୋଟେଇ ସେଟ୍ କରନ୍ତୁ।
- 2D ସ୍ଲାବ୍ ଆଉଟଲାଇନ୍ରୁ 3Dରେ ସ୍ଲାବ୍ ତିଆରି କରନ୍ତୁ2Dରେ ଏକ ସ୍ଲାବ୍ ଆଉଟଲାଇନ୍ ଆଙ୍କନ୍ତୁ, ତାପରେ 3Dରେ ଏହାର ଉଚ୍ଚତା, ମୋଟେଇ ଓ ଟାଇଲ୍ ଫିନିଶ୍ ସେଟ୍ କରନ୍ତୁ।
- ଛାତ ସ୍ଲାବ ଲୁଚାଇବା ସମୟରେ ଅଦୃଶ୍ୟ ହୋଇଯାଉଥିବା ଫ୍ଲୋର ସ୍ଲାବ ଠିକ୍ କରନ୍ତୁଛାତ ଏବଂ ଫ୍ଲୋର ସ୍ଲାବ ଉଭୟ RCC ସ୍ଲାବ ହୋଇଥିବାରୁ ଛାତ ସ୍ଲାବ ଲୁଚାଇଲେ ଫ୍ଲୋର ସ୍ଲାବ ମଧ୍ୟ କାହିଁକି ଲୁଚିଯାଏ ଜାଣନ୍ତୁ।
- Add a slab and set its shape, elevation, thickness and materialDraw a slab outline in the 2D sketcher, apply it, then select the slab to adjust its shape, elevation, thickness or material.
- Fix the non-zero area error when adding a slab, ceiling, roof, rail or tilingSlab, Add Ceiling, Roof, Rail and Tiling all open the 2D sketcher, where you draw a closed shape before applying.
- Set slab elevation from the ground floorPlace a slab at the height you want above the ground floor using the Elevation field in the slab tool.
- Understand how the Slab tool creates free-standing geometryLearn that a slab always comes in at the top and can be dropped down to the floor.
- Set wall height and slab thickness from ceiling elevationEstablish the correct wall height for a kitchen layout by reading the ceiling's elevation and setting the slab thickness from the same panel.
- ଗୋଲାକାର ଆକୃତି ପାଇଁ କଷ୍ଟମ ପ୍ୟାନେଲ କିମ୍ବା ଆର୍କିଟେକ୍ଚର ସ୍ଲାବ ଟୁଲ ବ୍ୟବହାର କରନ୍ତୁଏକ ଗୋଲାକାର କିମ୍ବା ବକ୍ର ଉପାଦାନ ଯାହାକୁ ଏକ ସାଧାରଣ କ୍ୟାବିନେଟ ଉତ୍ପାଦନକୁ ନେଇପାରିବ ନାହିଁ, ତାହାକୁ କଷ୍ଟମ ପ୍ୟାନେଲ ଭାବରେ କିମ୍ବା ଆର୍କିଟେକ୍ଚର ସ୍ଲାବ ଟୁଲରେ ମଡେଲ କରି ଉପସ୍ଥାପନ କରନ୍ତୁ।
- RCC ସ୍ଲାବରୁ ଏକ ଫଲ୍ସ ସିଲିଂ ତିଆରି କରନ୍ତୁଏକ ସିଲିଂ ଯୋଡ଼ନ୍ତୁ, ତାପରେ ଏକ ଫଲ୍ସ ସିଲିଂ ଡ୍ରାଫ୍ଟ କରିବା ପାଇଁ ଏହାର Create False Ceiling ବିକଳ୍ପ ବ୍ୟବହାର କରନ୍ତୁ, କାରଣ Slabs ଟୁଲ ସହିତ ଅଙ୍କିତ ଏକ ସ୍ଲାବରେ ଏପରି କୌଣସି ବିକଳ୍ପ ନାହିଁ।
- ଆର୍କିଟେକ୍ଚର ଉପକରଣରୁ ସ୍ତମ୍ଭ, ବିମ୍ ଓ ସ୍ଲାବ ଯୋଡ଼ନ୍ତୁଆପଣଙ୍କ ଫ୍ଲୋର ପ୍ଲାନରେ ସ୍ତମ୍ଭ, ବିମ୍ ଓ ସ୍ଲାବ ରଖନ୍ତୁ ଏବଂ ସେଗୁଡ଼ିକର ମାପ, ଶେଷ ବିନ୍ଦୁ, ଉଚ୍ଚତା ଓ ମୋଟେଇ ସଜାଡ଼ନ୍ତୁ।
- Apply flooring to a room and add an RCC slab using the slab toolChange the flooring pattern or material of a room afterwards.
- How a countertop backsplash changes the slab's back extensionLearn how switching on a countertop's Back drop sets Extension Options > Back to 40 and how to bring the slab edge back to the unit's back.