设计偏好和单位
指南:25
- 按项目设置柜体偏好,或将其设为管理员默认值设置新项目起始时使用的默认柜体设置,分为柜身、门板和拉手。
- 为所放置的单元类型选择正确的偏好组选择与所放置单元类型相匹配的偏好组,使地柜、吊柜、顶柜和多用途单元使用柜体偏好,衣柜使用衣柜偏好。
- 从管理员偏好设置中打开柜体结构样式打开管理员偏好设置,进入柜体结构样式以设置柜体结构样式。
- 在毫米与英尺/英寸之间切换项目单位无需重新创建当前项目即可切换其工作单位。
- Configure shelves through preferencesSet shelf settings in preferences so newly created designs already have them applied and need no manual shelf setup.
- Find your org's default design preferencesOpen Manage Org Preferences from the admin portal to see your org's default design preferences, grouped by category and split across Design, Production and Design MES tabs.
- 修复管理员偏好设置导致的输出下载受阻问题三项管理员偏好设置可能会阻止设计师下载输出,当违规是原因时,管理员可以授予按设计分支的豁免。
- Open Global Preferences & Settings and find a preferenceOpen the Preferences panel from the bottom left and use its search to find the preference you need.
- Open Preferences and switch comment mode in a designOpen the Preferences panel to view and change the Active Sales Channel, and switch the 3D view into comment mode.
- Recover lost active sales channel via PreferencesRecover the active sales channel for a design that shows it has been lost by selecting the correct channel in Preferences.
- Understand what design preferences are stamped onto a new unitLearn which materials, finishes, edgebands and heights a unit receives the moment it is added from the catalogue carousel.
- 更新在偏好更改之前添加的单元对已放置的柜体重新应用门板、柜体和背板芯材,使其与当前偏好一致。
- 从柜体偏好设置中移除默认门板样式在管理员偏好设置中清除门板样式,即可停止将其默认应用到新的柜体设计。
- 按项目设置柜体和衣柜偏好打开设计的偏好设置菜单,为项目设置独立的柜体和衣柜材料默认值,替代账户级默认值。
- 在立面偏好设置中切换百叶方向、单元标注和搁板标注在立面偏好设置中开启或关闭百叶方向、单元标注和搁板标注,以控制显示哪些立面标注。
- 检查立面偏好设置中是否已启用手动标注板材尺寸确认用于启用手动标注尺寸板材的选项默认已开启,并了解它如何影响背板和柜体板。
- 在偏好设置中启用门板和台面标注开启门板和台面的标注偏好设置,使这些部件可被选中并进行标注。
- 在 Global Preferences 中为柜体和衣柜设置项目标准在项目层级一次性设置芯材、饰面、门板和拉手,之后添加的每个柜体和衣柜都会默认采用这些标准。
- 在衣柜偏好设置中设置搁板和竖隔板封边的可见性在 Cabinet Preference / Wardrobe Preference 中,将固定搁板、活动搁板和竖隔板的前面/柜体可见封边设置为柜体不可见。
- 在设计偏好中配置材料和柜体偏好在设计应用内的设计偏好中设置材料和配置偏好。
- Apply connectors design-wide via preferences or per cabinetApply connectors such as dowels to the whole design from the design preferences, using the connector options that come from the admin portal.
- How back and front panel extensions are set in preferencesLearn how the back, front and drawer bottom extensions are configured separately in preferences.
- Manage default unit placement in preferencesSet default unit placement in the preferences menu so upcoming units and pre-made modular or semi-modular units and extension parameters follow your defaults.
- Manage global layers from global preferencesOpen the fourth global preferences button to manage system and custom layers, set them global or view-specific, and control rich view with finishes per layer.
- Set default door, window and wall properties via PreferencesSet default properties for repeated elements so newly added doors, windows, elevations and walls inherit the same values across all rooms.