ડિઝાઇન પ્રેફરન્સ અને એકમો
માર્ગદર્શિકાઓ: 25
- દરેક પ્રોજેક્ટ માટે અથવા એડમિન ડિફોલ્ટ તરીકે કેબિનેટ પ્રેફરન્સ સેટ કરોનવો પ્રોજેક્ટ જે ડિફોલ્ટ કેબિનેટ સેટિંગ્સ સાથે શરૂ થાય તે સેટ કરો, જે કાર્કાસ, શટર અને હેન્ડલમાં વિભાજિત છે.
- તમે મૂકો તે યુનિટ પ્રકાર માટે યોગ્ય પ્રેફરન્સ ગ્રુપ પસંદ કરોમૂકવામાં આવતા યુનિટ પ્રકાર સાથે મેળ ખાતું પ્રેફરન્સ ગ્રુપ પસંદ કરો, જેથી બેઝ યુનિટ, વોલ યુનિટ, લોફ્ટ અને મલ્ટી-પર્પઝ યુનિટ કેબિનેટ પ્રેફરન્સ વાપરે અને વોર્ડરોબ વોર્ડરોબ પ્રેફરન્સ વાપરે.
- એડમિન પ્રેફરન્સ સેટિંગ્સમાંથી કન્સ્ટ્રક્શન સ્ટાઇલ્સ ખોલોએડમિન પ્રેફરન્સ સેટિંગ્સ ખોલો અને કન્સ્ટ્રક્શન સ્ટાઇલ્સ સેટ કરવા માટે કન્સ્ટ્રક્શન સ્ટાઇલ્સ પર જાઓ.
- પ્રોજેક્ટના એકમોને મિલિમીટર અને ફૂટ/ઇંચ વચ્ચે બદલોવર્તમાન પ્રોજેક્ટને ફરીથી બનાવ્યા વિના તેના કાર્યકારી એકમો બદલો.
- Configure shelves through preferencesSet shelf settings in preferences so newly created designs already have them applied and need no manual shelf setup.
- Find your org's default design preferencesOpen Manage Org Preferences from the admin portal to see your org's default design preferences, grouped by category and split across Design, Production and Design MES tabs.
- એડમિન પ્રેફરન્સમાંથી અવરોધિત આઉટપુટ ડાઉનલોડ ઠીક કરોત્રણ એડમિન પ્રેફરન્સ ડિઝાઇનરોને આઉટપુટ ડાઉનલોડ કરતા અવરોધી શકે છે, અને જ્યારે ઉલ્લંઘન કારણ હોય ત્યારે એડમિન પ્રતિ-ડિઝાઇન-શાખા મુક્તિ આપી શકે છે.
- Open Global Preferences & Settings and find a preferenceOpen the Preferences panel from the bottom left and use its search to find the preference you need.
- Open Preferences and switch comment mode in a designOpen the Preferences panel to view and change the Active Sales Channel, and switch the 3D view into comment mode.
- Recover lost active sales channel via PreferencesRecover the active sales channel for a design that shows it has been lost by selecting the correct channel in Preferences.
- Understand what design preferences are stamped onto a new unitLearn which materials, finishes, edgebands and heights a unit receives the moment it is added from the catalogue carousel.
- પસંદગી બદલાય તે પહેલાં ઉમેરાયેલા યુનિટ અપડેટ કરોપહેલેથી મૂકેલા કેબિનેટ પર શટર, કાર્કાસ અને બેક-પેનલ કોર મટીરિયલ ફરીથી લાગુ કરો, જેથી તે વર્તમાન પસંદગીઓ સાથે મેળ ખાય.
- કેબિનેટ પસંદગીઓમાંથી ડિફોલ્ટ શટર ડિઝાઇન દૂર કરોએડમિન પસંદગીઓમાં તેને સાફ કરીને નવી કેબિનેટ ડિઝાઇન પર શટર ડિઝાઇન ડિફોલ્ટ રૂપે લાગુ થતી અટકાવો.
- દરેક પ્રોજેક્ટ માટે કેબિનેટ અને વોર્ડરોબ પ્રાધાન્યતાઓ સેટ કરોપ્રોજેક્ટને એકાઉન્ટ-વ્યાપી પ્રાધાન્યતાઓને બદલે પોતાની કેબિનેટ અને વોર્ડરોબ મટીરિયલ ડિફોલ્ટ આપવા માટે ડિઝાઇનનું પ્રાધાન્યતા મેનુ ખોલો.
- એલિવેશન પસંદગીઓમાં શટર દિશા, યુનિટ અને શેલ્ફ એનોટેશન ટૉગલ કરોએલિવેશન પસંદગીઓમાં શટર દિશાઓ, યુનિટ એનોટેશન અને શેલ્ફ એનોટેશન ચાલુ કે બંધ કરીને કયા એલિવેશન એનોટેશન દેખાય તે નિયંત્રિત કરો.
- એલિવેશન પસંદગીઓમાં પેનલ્સનું મેન્યુઅલ ડાયમેન્શનિંગ સક્ષમ છે તે તપાસોમેન્યુઅલ ડાયમેન્શનિંગ માટે પેનલ્સ સક્ષમ કરવાનો વિકલ્પ ડિફોલ્ટ રૂપે ચાલુ છે તેની ખાતરી કરો અને તે બેક અને કાર્કાસ પેનલ્સને કેવી રીતે અસર કરે છે તે જુઓ.
- પસંદગીઓમાં શટર અને કાઉન્ટરટોપ માપન સક્ષમ કરોશટર અને કાઉન્ટરટોપ માટે માપન પસંદગી ચાલુ કરો, જેથી તે ભાગો પસંદ કરી શકાય અને તેમનું માપન થઈ શકે.
- ગ્લોબલ પ્રેફરન્સમાં કેબિનેટ અને વોર્ડરોબ માટે પ્રોજેક્ટ ધોરણો સેટ કરોમુખ્ય મટીરિયલ, ફિનિશ, શટર અને હેન્ડલ પ્રોજેક્ટ સ્તરે એક વાર સેટ કરો, જેથી પછીથી ઉમેરેલા દરેક કેબિનેટ અને વોર્ડરોબ માટે આ ધોરણો ડિફોલ્ટ થાય.
- વોરડ્રોબ પ્રેફરન્સમાં શેલ્ફ અને પાર્ટિશન એજ દૃશ્યતા સેટ કરોCabinet Preference / Wardrobe Preference માં ફિક્સ્ડ શેલ્ફ, એડજસ્ટેબલ શેલ્ફ અને વર્ટિકલ પાર્ટિશન પેનલ માટે ફ્રન્ટ/કાર્કાસ વિઝિબલ એજ બેન્ડને કાર્કાસ ઇન્વિઝિબલ પર સેટ કરો.
- ડિઝાઇન પસંદગીઓમાં મટીરિયલ અને કાર્કસ પસંદગીઓ ગોઠવોડિઝાઇન એપ્લિકેશનમાં ડિઝાઇન પસંદગીઓ હેઠળ મટીરિયલ અને કન્ફિગરેશન પસંદગીઓ સેટ કરો.
- Apply connectors design-wide via preferences or per cabinetApply connectors such as dowels to the whole design from the design preferences, using the connector options that come from the admin portal.
- How back and front panel extensions are set in preferencesLearn how the back, front and drawer bottom extensions are configured separately in preferences.
- Manage default unit placement in preferencesSet default unit placement in the preferences menu so upcoming units and pre-made modular or semi-modular units and extension parameters follow your defaults.
- Manage global layers from global preferencesOpen the fourth global preferences button to manage system and custom layers, set them global or view-specific, and control rich view with finishes per layer.
- Set default door, window and wall properties via PreferencesSet default properties for repeated elements so newly added doors, windows, elevations and walls inherit the same values across all rooms.