디자인 환경 설정 및 단위
가이드: 25
- 프로젝트별로 또는 관리자 기본값으로 캐비닛 환경설정 지정새 프로젝트가 시작할 때 적용되는 기본 캐비닛 설정을 몸체, 슈터, 손잡이로 나누어 지정합니다.
- 배치하는 유닛 유형에 맞는 환경설정 그룹을 선택하세요배치하는 유닛 유형에 맞는 환경설정 그룹을 선택하여 하부장, 벽장, 상부 수납장 및 다목적 유닛은 캐비닛 환경설정을 사용하고 옷장은 옷장 환경설정을 사용하도록 하세요.
- 관리자 환경 설정에서 구성 스타일 열기관리자 환경 설정을 열고 구성 스타일로 이동하여 구성 스타일을 설정하세요.
- 프로젝트 단위를 밀리미터와 피트/인치 사이에서 변경현재 프로젝트를 다시 만들지 않고 작업 단위를 전환합니다.
- Configure shelves through preferencesSet shelf settings in preferences so newly created designs already have them applied and need no manual shelf setup.
- Find your org's default design preferencesOpen Manage Org Preferences from the admin portal to see your org's default design preferences, grouped by category and split across Design, Production and Design MES tabs.
- 관리자 환경설정에서 차단된 출력 다운로드 문제 해결세 가지 관리자 환경설정으로 인해 디자이너가 출력을 다운로드하지 못할 수 있으며, 위반이 원인인 경우 관리자가 디자인 브랜치별 예외를 부여할 수 있습니다.
- Open Global Preferences & Settings and find a preferenceOpen the Preferences panel from the bottom left and use its search to find the preference you need.
- Open Preferences and switch comment mode in a designOpen the Preferences panel to view and change the Active Sales Channel, and switch the 3D view into comment mode.
- Recover lost active sales channel via PreferencesRecover the active sales channel for a design that shows it has been lost by selecting the correct channel in Preferences.
- Understand what design preferences are stamped onto a new unitLearn which materials, finishes, edgebands and heights a unit receives the moment it is added from the catalogue carousel.
- 환경설정 변경 전에 추가된 유닛 업데이트이미 배치된 캐비닛에 셔터, 몸체, 뒷판 코어 자재를 다시 적용하여 현재 환경설정과 일치하도록 합니다.
- 캐비닛 기본 설정에서 기본 셔터 디자인 제거관리자 기본 설정에서 셔터 디자인을 지워 새 캐비닛 디자인에 기본으로 적용되지 않게 하세요.
- 프로젝트별로 캐비닛과 붙박이장 기본 설정 지정디자인의 기본 설정 메뉴를 열어 프로젝트에 계정 전체 기본값 대신 자체 캐비닛 및 붙박이장 재질 기본값을 지정하세요.
- 입면 설정에서 셔터 방향, 유닛 및 선반 주석 표시/숨기기입면 설정에서 셔터 방향, 유닛 주석 및 선반 주석을 켜거나 꺼서 표시되는 입면 주석을 제어합니다.
- 입면 환경설정에서 패널의 수동 치수 지정이 활성화되어 있는지 확인하세요.수동 치수 지정을 위해 패널을 활성화하는 옵션이 기본적으로 켜져 있는지 확인하고, 이것이 뒷판과 몸통 패널에 어떤 영향을 주는지 확인하세요.
- 환경설정에서 셔터 및 상판 치수 표시 활성화셔터와 상판에 대한 치수 표시 환경설정을 켜면 해당 부재를 선택할 수 있고 치수를 표시할 수 있습니다.
- Global Preferences에서 수납장과 옷장의 프로젝트 기준 설정프로젝트 수준에서 심재, 마감재, 도어, 손잡이를 한 번 설정하면 이후 추가하는 모든 수납장과 옷장에 해당 기준이 기본값으로 적용됩니다.
- 옷장 환경설정에서 선반 및 칸막이 가장자리 표시 여부 설정Cabinet Preference / Wardrobe Preference에서 고정 선반, 조절 선반 및 수직 칸막이 패널의 전면/몸체 보이는 엣지 밴드를 몸체 비표시로 설정하십시오.
- 디자인 환경설정에서 자재 및 캐커스 기본 설정 구성디자인 애플리케이션의 디자인 환경설정에서 자재 및 구성 기본 설정을 지정하세요.
- Apply connectors design-wide via preferences or per cabinetApply connectors such as dowels to the whole design from the design preferences, using the connector options that come from the admin portal.
- How back and front panel extensions are set in preferencesLearn how the back, front and drawer bottom extensions are configured separately in preferences.
- Manage default unit placement in preferencesSet default unit placement in the preferences menu so upcoming units and pre-made modular or semi-modular units and extension parameters follow your defaults.
- Manage global layers from global preferencesOpen the fourth global preferences button to manage system and custom layers, set them global or view-specific, and control rich view with finishes per layer.
- Set default door, window and wall properties via PreferencesSet default properties for repeated elements so newly added doors, windows, elevations and walls inherit the same values across all rooms.