デザイン設定と単位
ガイド:25
- キャビネットの設定をプロジェクトごと、または管理者の既定値として設定する新しいプロジェクトの開始時に適用されるキャビネットの既定設定を、キャーカス、扉、取っ手に分けて設定します。
- 配置するユニットタイプに合った設定グループを選択してください配置するユニットタイプに合った設定グループを選択してください。ベースユニット、ウォールユニット、ロフト、多目的ユニットにはキャビネット設定が適用され、ワードローブにはワードローブ設定が適用されます。
- 管理設定から構造スタイルを開く管理設定を開き、構造スタイルに移動して構造スタイルを設定します。
- プロジェクトの単位をミリメートルとフィート/インチの間で変更する現在のプロジェクトを作り直さずに、作業単位を切り替えます。
- Configure shelves through preferencesSet shelf settings in preferences so newly created designs already have them applied and need no manual shelf setup.
- Find your org's default design preferencesOpen Manage Org Preferences from the admin portal to see your org's default design preferences, grouped by category and split across Design, Production and Design MES tabs.
- 管理者設定による出力ダウンロードのブロックを修正する3つの管理者設定が設計者による出力のダウンロードをブロックする可能性があり、違反が原因である場合、管理者はデザインブランチごとの免除を付与できます。
- Open Global Preferences & Settings and find a preferenceOpen the Preferences panel from the bottom left and use its search to find the preference you need.
- Open Preferences and switch comment mode in a designOpen the Preferences panel to view and change the Active Sales Channel, and switch the 3D view into comment mode.
- Recover lost active sales channel via PreferencesRecover the active sales channel for a design that shows it has been lost by selecting the correct channel in Preferences.
- Understand what design preferences are stamped onto a new unitLearn which materials, finishes, edgebands and heights a unit receives the moment it is added from the catalogue carousel.
- 設定変更前に追加したユニットを更新する配置済みのキャビネットに、扉、本体、背板の芯材を再適用し、現在の設定に合わせます。
- キャビネット設定から既定の扉仕様を削除する管理設定でクリアすると、新しいキャビネットのデザインに扉仕様が既定で適用されなくなります。
- プロジェクトごとにキャビネットとワードローブの設定を行うデザインの設定メニューを開くと、アカウント全体の既定値ではなく、プロジェクト独自のキャビネットとワードローブの材質既定値を設定できます。
- 立面設定でシャッター方向、ユニット、棚の注記の表示を切り替える立面設定でシャッター方向、ユニット注記、棚注記をオンまたはオフにして、表示される立面注記を制御します。
- 立面設定でパネルの手動寸法指定が有効になっていることを確認します手動寸法指定用にパネルを有効にするオプションがデフォルトでオンになっていることを確認し、背パネルとキャーカスパネルへの影響を確認します。
- 環境設定で扉とカウンター天板の寸法表示を有効にする扉とカウンター天板の寸法設定をオンにすると、これらの部品を選択できるようになり、寸法を表示できます。
- グローバル設定で、キャビネットとワードローブのプロジェクト基準を設定する芯材、仕上げ、扉、取っ手をプロジェクト単位で一度設定すると、その後追加するすべてのキャビネットとワードローブはその基準が既定値になります。
- ワードローブ設定で棚板と間仕切り板の端部の表示を設定するキャビネット設定 / ワードローブ設定で、固定棚板、可動棚板、縦間仕切り板の正面/キャーカスの見えるエッジバンドをキャーカス非表示に設定します。
- デザイン設定で素材とキャビネット本体の設定を行います素材と構成の設定は、デザイン設定のデザインアプリケーション内で行います。
- Apply connectors design-wide via preferences or per cabinetApply connectors such as dowels to the whole design from the design preferences, using the connector options that come from the admin portal.
- How back and front panel extensions are set in preferencesLearn how the back, front and drawer bottom extensions are configured separately in preferences.
- Manage default unit placement in preferencesSet default unit placement in the preferences menu so upcoming units and pre-made modular or semi-modular units and extension parameters follow your defaults.
- Manage global layers from global preferencesOpen the fourth global preferences button to manage system and custom layers, set them global or view-specific, and control rich view with finishes per layer.
- Set default door, window and wall properties via PreferencesSet default properties for repeated elements so newly added doors, windows, elevations and walls inherit the same values across all rooms.