饰面、材料和封边条
指南:131
- How edge bands are automatically linked to finishesLearn how a cabinet's finish drives its edge bands and where to check the links when an edge band is missing.
- 从单元的材质面板更改柜体和门板芯材打开单元的材质面板,在厚度下拉菜单中设置门板芯材和柜体芯材。
- 使用Edgeband Linking覆盖单个板件的封边饰面在Edgeband Linking下拉列表中选择一个选项,即可独立于所属单元单独设置某个板件的封边饰面。
- 在饰面目录中添加层压板子类别在向饰面目录添加饰面之前,请先在该目录中创建新的层压板子类别,例如皮革层压板。
- 在目录中创建芯材并更新产品厚度更新产品的详细信息并重新加载页面以更改其厚度,然后将柜门和衣柜组件切换为新的芯材。
- Set default carcass and shutter materials in catalogueOpen a cabinet or wardrobe item and set its shutter finish and shutter core materials so new cabinets pick them up automatically.
- 在目录中添加自定义材料,例如 flex ply创建目录中尚不存在的材料,例如用于弧形或柔性面板的柔性胶合板,使其可在设计和材料清单中使用。
- 预贴面饰面如何将层压板贴到两面了解预贴面饰面选项如何将层压板贴到板材的两面,以及您还需要选择什么。
- 更新材料目录中的芯材通过编辑材料目录中的芯材条目,更改柜体使用的板材。
- 通过批量创建或逐行录入添加材料可以通过批量创建选项或逐行输入详细信息,将材料添加到饰面等类别中。
- Fix edge bands that cannot be linked to a raw boardLink an edge band only to a board that has a laminate or finish applied, since a raw board cannot take one.
- 设置橱柜和衣柜的柜体和门板默认材料偏好保存柜体和门板的默认材料偏好,使每个新项目中的厨房橱柜和衣柜橱柜都以此作为初始设置。
- 在目录中添加带有型号和厚度的新材料添加材料及其必填的型号和厚度,重新加载后该材料即可在design portal中使用。
- 在芯材库中添加新的胶合板厚度在五金芯材部分创建新的胶合板厚度条目,使其在库中可用。
- 在Lamination Type标签页上更改预贴面板材的饰面在Lamination Type标签页上设置预贴面板材的外饰面和内饰面,以便将正确的饰面应用到 SKU。
- 为板材厚度定义芯材在目录中,芯材代表板材的厚度。
- 使用 Material QC 在整个设计中查找并替换材质查看所选材质应用到的每个房间和每块板件,然后一次性全部替换:可按房间替换,也可替换整个设计。
- 在五金类别中查找芯材和自定义板材了解芯材、自定义板材、层压板和亚克力在目录中的位置,以便正确分类。
- 通过Linked SKUs将封边条关联到五金SKU通过Linked SKUs部分将封边条附加到五金SKU,使两者在您的产品目录中保持关联。
- 通过 CSV 添加自定义材料并输入 SKU 和原材料价格添加您自己的胶合板厚度和材料及其成本,并为原材料输入成本价、税率和期望利润率,以便计算销售价格。
- 批量添加饰面,无需逐个克隆在一次批量操作中创建多个饰面,无需逐个克隆并重命名。
- 删除并重新添加芯材条目当您的目录需要时,移除芯材条目并再次将其添加回来。
- Find a laminate finish in the carouselLearn how finish cards are ordered in a finish carousel and how to search for a laminate by name.
- 关联封边偏好如何运作了解管理员偏好 "Favour Linked Edgeband Over Edgeband Source" 如何决定系统采用哪种封边。
- 让材料显示在饰面材料下拉列表中在目录的饰面材料部分创建或选择材料,使其显示在饰面材料下拉列表中。
- 在目录设置中按每张板材设置芯材含税价格打开该材料的设置,编辑其 SQ 属性定价,为芯材定价,并从目录中移除未使用的材料。
- 在admin portal中设置芯材厚度在admin portal中设置一次芯材厚度;需要薄板时,请创建单独的芯材并设置其厚度。
- 为从仓库添加的饰面设置价格为您添加的防火板或饰面输入价格,使其可用于设计和报价。
- 将玻璃存放在五金目录的玻璃分类下将玻璃存放在五金目录的玻璃分类下,以便用于定价。
- 使用构造样式,避免重复手动输入材料应用构造样式,让预定义的材料设置、尺寸、尺寸规则和饰面一次性应用到多个单元,无需逐字段输入。
- 在创建饰面之前添加饰面子类别创建饰面子类别,以便在其下整理您的饰面。
- 从仓库添加防火板和封边条通过品牌筛选和子类别勾选,将品牌饰面加入您的目录。
- 为各个 SKU 附加饰面并添加饰面标签为每个 SKU 附加饰面,并为饰面条目本身添加标签,以便正确识别饰面。
- 将玻璃按不同厚度变体分别编目将一种玻璃的每个可用厚度定义为独立的目录条目,以便素色玻璃、黑色着色玻璃和棕色着色玻璃按厚度分别编目。
- Core material 厚度上限为 25 mm了解根据目录中已创建的内容可用的最大芯材厚度。
- 将芯材定义为预贴面板材以锁定成品厚度将芯材定义为预贴面板材,以固定成品板材厚度,使饰面贴面板之后无法更改。
- 为饰面板定义纹理方向,以避免板材优化出现问题在饰面板的附加属性中设置其纹理方向,以便板材排版优化和现场安装顺利进行。
- 材料如何分为饰面、芯材和封边了解目录材料如何分为饰面、芯材和封边,以及每个分组如何拆分以便分配。
- 将柜体和背板关联到同一个饰面代码在admin portal中关联材料、饰面和厚度属性,以便系统自动应用这些属性,然后定义预贴面板单位并设置其属性。
- 为可见面和不可见面设置柜体封边条厚度在admin portal中配置封边条规格,并在各自独立的字段中设置柜体的可见封边条和不可见封边条。
- 在Lamination Type选项卡上设置层压类型和饰面关联打开芯材的SKU属性,保存层压类型及其外饰面和内饰面。
- Understand the one-to-one material rule and inherited display pictureLearn why a material can only attach to one SKU and why swapping a material resets the SKU thumbnail.
- 从管理目录更新材质的默认设置在目录层级更改材质的设置,使其成为该材质的默认设置。
- 从admin portal批量添加饰面作为从admin portal批量录入饰面的一部分,逐步添加单个饰面。
- 为自定义板件的切边应用封边材料选择板件的左侧、右侧、前侧或后侧边缘,并设置切边封边材料;仅当板件来源标记为自定义时才会应用。
- 通过类别、子类别、组和 SKU 选择台面材料打开从目录更换轮播,并通过其类别、子类别和组选择台面材料 SKU。
- 独立选择内表面和外表面饰面设置Prelam Internal或Prelam External,使板材只能在一面带有饰面。
- 使用批量克隆将所选材料复制到新组中通过一次性将所选条目克隆到新组或文件夹中,即可复制一组材料。
- 为柜体和门板材料区分可见边与不可见边分配封边和材料,使柜体和门板的可见边与不可见边正确呈现。
- 深入查看材料的板件数量,查看其板件打开材料的板件数量,查看使用该材料的各个板件。
- 使用 Clone SKU entries 复制材料并设置其属性使用 Clone SKU entries 从目录中复制材料,并为副本设置独立的编码和属性。
- Edit panel edges and apply materials by panel typeApply materials correctly by telling the drawer carpass panel apart from the drawer bottom panel (tandem bottom).
- 为木质柜体层压板启用'has grain'为木质柜体层压板开启'has grain'选项,以便正确处理纹理方向。
- 输入不含饰面的核心材料厚度编辑核心材料的 SKU 属性时,请输入不含饰面的原板厚度。
- 使用Select Brands并按“应用”按品牌筛选目录材料将材料目录缩小到您想要的品牌,然后应用所选内容,以便仅显示这些品牌。
- 如何指定背板及其他芯材的厚度了解背板芯材以及 MR 级胶合板等其他芯材按何种厚度指定。
- 约束和规则如何控制材料、饰面、定价和五金了解约束和规则如何控制哪些材料与饰面可以组合、定价如何运作,以及五金和饰面如何自动应用。
- Link internal and external finishes to a core materialAttach the finishes that show on a core material's internal and external surfaces from its Lamination Type tab.
- 关联饰面板实心材料,使外部颜色自动更新关联饰面板实心材料,使其外部颜色自动更新,与所关联的饰面板保持一致。
- 在仓库材料系统中管理五金封边条五金封边条在仓库材料系统中管理。
- Open material settings via picker tool or item three-dot menuOpen a material's settings either from the item's three-dot menu or by picking the material in the viewport, then review what those settings control.
- 在设计中使用仓库层压板饰面通过Add from Warehouse导入品牌层压板饰面,使其显示在饰面部分下,并可应用到设计中。
- Add glass variants as separate catalogue entriesAdd frosted, tinted and other glass variants to the catalogue as separate entries.
- Add rates for materials even if not currently usedGive every material a rate so that any material a designer later uses is not passed to the client without a price.
- Add unbranded materials and reusable 3D objectsUpload high-resolution images as materials and let an admin add common 3D objects for reuse.
- Apply inner and outer laminate materials separatelySelect inner laminate and outer laminate separately when applying materials in the design.
- Change glass properties from imported catalogue materialUse the property controls in the material panel to change the properties of the selected catalogue material, such as imported glass.
- Check a unit's material serial number to spot cloned materialsPoint at a unit's finish material name to read its serial number and confirm the material is a genuine catalogue item.
- Clone glass and hardware rather than building from scratchPrefer cloning an existing warehouse SKU for glass and hardware so the new item behaves correctly.
- Edit finish and shutter reduction separately on a profileChange a profile's finish and shutter reduction independently, since editing one never updates the other.
- Enable the catalogue-side setting for glass shelf annotationsTurn on the catalogue-side setting so glass shelves appear in the annotation style used for shelf types.
- Fill the display image column in a material import sheetPut the display image file name with its extension in the display image column so the material catalogue import sheet is accepted.
- Filter finishes by brand and finish typeNarrow the finish list by a specific brand and by finish types such as fabrics and cement finishes.
- Filter finishes by brand name and add them to your catalogueFilter the finish list by a brand name and apply it so only that brand's items are shown.
- Fix an edgeband that no longer resolves after its linked SKU is deletedLearn why a design edgeband stops resolving to a valid catalogue SKU when the linked edgeband SKU is deleted from the catalogue admin.
- How a finish SKU's grain is stored and shownLearn how a finish SKU's grain is stored as the default additional property 'Has Grain' (has_grain) and where design QC mode displays it per finish.
- 背板联动如何跟随芯材厚度了解选择芯材后,如何自动设置匹配的背板材料和厚度。
- How custom finishes are named separately from the base materialLearn how a custom finish is built by applying a finish onto a core material.
- How shutter core, edgeband and handle settings affect cabinetsLearn how a chosen shutter core, the Edgeband panel types and a handle's Shutter Height Reduction change the cabinets you place.
- 柜门饰面如何由芯材关联决定了解柜门的可见饰面来自目录中与芯材关联的饰面,而不是芯材本身。
- 将背板材料来源关联到柜体背板芯通过将背板的材料来源关联到柜体背板芯,控制背板使用哪种材料。
- Pick external and internal finishes in the Lamination Type tabPick each finish section in five steps and confirm the saved finishes after applying and reopening the SKU.
- Price glass clips per cabinet with corner or center variantsDefine the quantity rule once so glass clip pricing applies consistently across every cabinet.
- Save model number, name, thickness and material info for catalog finishesRecord the model number, name, thickness and material details, including colour and texture, when saving a finish in the catalogue.
- Set core to 23mm for 25mm post-laminated thicknessSet the core thickness to 23mm in the admin portal so that adding 1mm laminate on each side yields the 25mm finished thickness.
- Set default core material in construction style without locking finishesSet the default shutter core material and carcass edgeband material when you create a construction style, without locking the finishes.
- Set grain on multiple finishes at once with bulk editMark grain on several finishes together by selecting them in the catalogue and applying it once through bulk edit.
- Set lamination type and linked back panel core for a core materialChoose a lamination type for a core material and link its back panel core material in Edit SKU Properties.
- Set material properties at creation and publish selected materialsSet properties such as finish type while creating a material so designers do not need to adjust them later.
- Set up material properties, textures and templatesLearn how the Material Properties modal handles color and texture bases, texture uploads, map slots and material templates so you can configure finish materials correctly.
- Shorten material display names from the admin catalogue settingsEdit the material name in the admin/catalogue settings so cutlist labels show a shorter name.
- Toggle material visibility per material in the catalogueToggle visibility for each material in the catalogue so only the materials you need are shown.
- Understand core material thickness standardsLearn how core material thickness options vary by board type, with 18mm the default carcass thickness and standard defaults also defined for back panels.
- Understand the material count next to a subcategory headingLearn what the number such as '163 plus' beside a subcategory heading means and how scrolling down reveals more materials.
- Use rattan designs and fabric materials from the catalogueFind the rattan designs and fabric materials already in the catalogue and use them in your designs.
- 向目录添加新 SKU,并设置属性、品牌和饰面创建目录 SKU,填写其结构、材料、五金、配件、踢脚板和饰面属性,设置其俯视图和品牌,并定义其饰面详情。
- 从左侧面板更改柜体材料和饰面Select a unit,然后从左侧面板更改其材料,根据需要多次重新选择,以匹配客户的颜色。
- 在类别和子类别下创建并批量克隆饰面将饰面添加到饰面目录,按品牌筛选,并批量克隆以一次创建多个相似条目。
- 将缺失的五金件和材料添加到目录中在Add hardware中,在定价或使用admin portal中的芯材和饰面材料进行设计之前,请先添加这些材料。
- 更改柜体材料和拉手,无需复制柜体直接在已有柜体上更换材料或拉手,无需复制它们。
- 通过 SKU 属性将 SKU 关联到芯材将 SKU 关联到芯材,以便对其应用材料关联。
- 添加新的封边条SKU及其材料信息在Hardware > Edge Bands中添加新的封边条SKU,填写厚度、Tape Width和必填的材料信息。
- 无需层压板编码即可处理门窗材料门窗不需要层压板编码或类似的目录编码,因此您可以在没有编码的情况下处理它们,并单独导入其材料。
- 在配置柜门之前,添加无拉手型材、拉手型材和玻璃在柜门系统配置中映射之前,请先设置柜门系统所需的型材和玻璃类型。
- 为其他厚度克隆组和芯材克隆一个组或玻璃芯材,并更改厚度值,以另一种厚度提供相同的板材。
- 编辑前先克隆非自有的默认芯材克隆默认芯材,即可获得可编辑的自有条目,还可选择批量克隆并带价格。
- Generate category-specific item lists for core material and hardwareSelect a category under core material and hardware so the catalogue generates the item list for that category.
- 为饰面、材料或防火板 SKU 指定品牌在编辑饰面的材料信息、创建材料或设置 SKU 属性时,选择一个已保存的品牌。
- 克隆并重命名饰面板或饰面通过克隆相似的饰面板或饰面并重命名,创建仓库中没有的饰面板或饰面。
- 为材料的预贴面版和后贴面版创建单独的 SKU为同一芯材的预贴面版和后贴面版设置各自的 SKU,使饰面清单保持分开。
- Find a hardware item by finish and item numberOpen Catalog Hardware, narrow the list by finish, then open the subcategory and search the item number to find a specific hardware component.
- 板材饰面与类别的标签如何构建饰面与材料组合了解应用于板材饰面或类别的标签如何决定产品可提供的饰面、材料和价格组合。
- 按材质和单元类型将SKU归入子类别将SKU分组到子类别中,以便设计师从正确的集合中挑选和拖放,并按单元类型和材质进行划分。
- 将复制的 G 列和 H 列保存为 CSV,以应用批量物料更新使用 CSV 文件可在系统中批量编辑和更新物料,例如顶冠饰面。
- Set hardware core material with thickness and lamination propertiesDefine a hardware core material with its thickness and lamination so it can be linked to SKUs and finishes.
- 设置饰面 SKU 的材料、关联封边和批量图片上传配置饰面 SKU 的材料预览、纹理、包覆和模板,保存后关联封边,并通过带图片的 CSV 批量创建 SKU。
- 批量给材料打标签以驱动规则条件在admin portal中创建标签,从目录中一次性将其应用到多个材料,并让规则引用该标签而不是单个材料。
- 编辑材料后更新 SKU 缩略图编辑目录材料后刷新缓存,使新颜色及其他更新后的值同步到设计中。
- Clone a material group and link the new finishClone a material group, pick its destination, and link the new finish to the right core material.
- Group finishes into subcategoriesCreate subcategories to group finishes such as solids, glossy, linen and wooden.
- 设计约束如何将饰面映射到材料和SKU了解设计约束如何控制设计师对某种材料可见的饰面,以及映射的类别和SKU是如何定义的。
- Price different brands and thicknesses with copied materialsCopy or clone a material entry so different brands and thicknesses carry their own cost while keeping manufacturing details.
- Refresh design portal cache after changing linked SKU materialsSave the linked material change, then refresh the cache in the design portal settings so designs pick it up.
- Tag non-PU finishes to enable premilling in designsAdd tags to non-PU finishes in bulk so premilling can be enabled in designs.
更多指南 7
显示全部(7)
- 为吊柜和地柜分别应用封边条为吊柜和地柜分别应用封边条,而不是对所有柜体使用同一条封边条。
- 清理目录,仅保留贵组织实际使用的项目将目录精简为贵组织实际使用的材料和五金件,使其保持准确且易于管理。
- 为预贴面多层板配置 Prelam Both 并关联饰面板设置 Prelam Both 并关联饰面板,使其在使用该多层板时自动作为两面饰面出现。
- How lamination type determines total panel thicknessSee how the lamination type set on the core material decides whether the thickness you enter already includes the finishes or only the core.
- Change catalog settings via preferencesSet catalog settings such as core material through preferences so the option can be selected.
- Import a saved style into the bulk structure editorLoad a saved style such as a kitchen base style into the editor for all selected units and change only the core material.
- Use catalog manager filters to find existing laminates and itemsFilter the catalogue by properties such as matte finish and high gloss laminates to find the items you need.