仕上げ、素材、エッジバンド
ガイド:131
- エッジバンドが仕上げに自動でリンクされる仕組みキャビネットの仕上げがエッジバンドをどのように決めるのか、エッジバンドが欠けているときにどこでリンクを確認するのかを説明します。
- ユニットの素材パネルから本体芯材と扉芯材を変更するユニットの素材パネルを開き、厚みのドロップダウンから扉と本体の芯材を設定します。
- Edgeband Linkingでパネルのエッジバンド仕上げを上書きするEdgeband Linkingドロップダウンでオプションを選択すると、ユニットとは独立して単一のパネルのエッジバンド仕上げを設定できます。
- 仕上げカタログにラミネートのサブカテゴリを追加する仕上げを追加する前に、仕上げカタログに新しいラミネートのサブカテゴリ(例:レザーラミネート)を作成してください。
- カタログで芯材を作成し、製品の厚みを更新する製品の詳細を更新してページを再読み込みすると厚みが変更されます。その後、キャビネットの扉とワードローブの構成部品を新しい芯材に切り替えます。
- カタログでデフォルトのキャビネット本体と扉の材質を設定するキャビネットまたはワードローブのアイテムを開き、扉の仕上げ材と扉の芯材を設定すると、新しいキャビネットに自動的に反映されます。
- フレックス合板などのカスタム素材をカタログに追加する曲面パネルやフレキシブルパネル用のフレキシブル合板など、カタログにまだない素材を作成すると、デザインや素材リストで使用できるようになります。
- プレラミネート仕上げでパネルの両面にラミネートを貼る方法プレラミネーション仕上げオプションがパネルの両面にラミネートを貼る仕組みと、別途選択が必要な項目について説明します。
- 素材カタログの芯材を更新する素材カタログの芯材の項目を編集して、キャビネットが使用する板素材を変更します。
- 一括作成または1行ずつの入力で材料を追加する仕上げなどのカテゴリに材料を追加するには、一括作成オプションを使うか、詳細を1行ずつ入力します。
- Fix edge bands that cannot be linked to a raw boardLink an edge band only to a board that has a laminate or finish applied, since a raw board cannot take one.
- キャビネットとワードローブの躯体および扉材のデフォルト設定を指定します躯体と扉材のデフォルト設定を保存すると、新しいプロジェクトのキッチンおよびワードローブのキャビネットがその設定で始まります。
- カタログに型番と厚さを指定して新しい素材を追加する必須の型番と厚さを指定して素材を追加すると、再読み込み後にdesign portalで使用できるようになります。
- 芯材ライブラリに新しい合板の厚さを追加するハードウェアの芯材セクションで新しい合板の厚さの項目を作成すると、ライブラリで使用できるようになります。
- Lamination Typeタブでプレラムボードの仕上げを変更するLamination Typeタブでプレラムボードの外面と内面の仕上げを設定し、SKUに正しい仕上げが適用されるようにします。
- パネル厚さの芯材を定義するカタログでは、芯材がパネルの厚さを表します。
- Material QCでデザイン全体の素材を検索して置き換える選択した素材が適用されているすべての部屋とパネルを確認し、部屋ごとまたはデザイン全体で一度に置き換えられます。
- ハードウェアカテゴリで芯材とカスタムパネルを見つける芯材、カスタムパネル、ラミネート、アクリルがカタログのどこにあるかを理解し、正しく分類できるようにしましょう。
- Linked SKUsでエッジバンドをハードウェアSKUにリンクするLinked SKUsセクションからエッジバンドをハードウェアSKUに紐付けると、カタログ内で両者が関連付けられたままになります。
- カスタム素材を追加し、CSVでSKUと原材料価格を入力する独自の合板の厚さと素材をそれぞれのコストとともに追加し、原材料の原価、税率、希望マージンを入力すると販売価格が計算されます。
- 一度に1つずつ複製する代わりに、仕上げを一括で追加する1つずつ複製して名前を変更するのではなく、一括操作で複数の仕上げを一度に作成します。
- 芯材エントリの削除と再追加カタログで必要になったときに、芯材エントリを削除して再度追加できます。
- カルーセルでラミネート仕上げを探す仕上げカルーセルで仕上げカードが並ぶ順序と、名前でラミネートを検索する方法を説明します。
- リンクされたエッジバンドの設定の仕組み管理者設定 "Favour Linked Edgeband Over Edgeband Source" が、システムがどのエッジバンドに従うかをどのように決定するかを説明します。
- 仕上げ材のドロップダウンに材料を表示させるカタログの仕上げ材セクションで材料を作成または選択すると、仕上げ材のドロップダウンに表示されます。
- カタログ設定で、芯材の1枚あたりの税込価格を設定しますOpen the material's settings and edit its SQ properties pricing to price a core material, and remove unused materials from the catalogue.
- admin portalで芯材の厚さを設定します芯材の厚さはadmin portalで一度設定します。薄い板が必要な場合は、独自の厚さを持つ別の芯材を作成してください。
- 倉庫から追加した仕上げ材の価格を設定する追加したラミネートや仕上げ材に価格を入力すると、デザインや見積で使用できるようになります。
- ガラスは、ハードウェアカタログのガラスの下に登録します価格設定で使用できるように、ガラスはハードウェアカタログのガラスの下に登録します。
- 施工スタイルを使用して、手作業による材料入力の繰り返しを避ける施工スタイルを適用すると、事前に定義した材料設定、寸法、サイズ設定ルール、仕上げを、フィールドごとに入力する代わりに多数のユニットへ一度に反映できます。
- 仕上げを作成する前に、仕上げサブカテゴリを追加します仕上げサブカテゴリを作成すると、その下で仕上げを整理できます。
- Add laminates and edge bands from the warehouseBring branded finishes into your catalogue with the brand filter and subcategory ticks.
- 個々のSKUに仕上げと仕上げタグを設定する各SKUに仕上げを設定し、仕上げ項目自体にタグを付けて、仕上げが正しく認識されるようにします。
- ガラスを厚さごとの個別バリエーションとしてカタログ登録するガラスの種類ごとに利用可能な厚さをそれぞれ独立したカタログ項目として定義し、透明、黒色着色、茶色着色のガラスを厚さごとにカタログ登録します。
- Core materialの厚さは最大25 mmですカタログで作成済みの内容に基づき、利用可能な芯材の最大厚さを確認できます。
- 仕上げ厚を固定するため、コアをプレラムとして定義するコア材をプレラム板として定義し、仕上げパネルの厚みを固定します。これにより、後から化粧シートを変更できなくなります。
- 板取り最適化の不具合を防ぐため、化粧シートの木目方向を定義する板取り最適化と現場での施工をスムーズに進めるため、化粧シートの追加プロパティで木目方向を設定します。
- 材料が仕上げ材、芯材、エッジバンドにどのように分類されるかカタログの材料が仕上げ材、芯材、エッジバンドにどのようにグループ化され、各グループが割り当て用にどのように分割されるかを説明します。
- Link carcass and back panel to one finish codeLink materials, finishes and thickness properties in the admin portal so the system applies them automatically, then define the prelam board unit and set its properties.
- 見える面と見えない面の躯体のエッジバンド厚みを設定しますadmin portalでエッジバンド仕様を設定し、躯体の見えるエッジバンドと見えないエッジバンドをそれぞれ別のフィールドで設定します。
- Lamination Typeタブでラミネートタイプと仕上げのリンクを設定します芯材のSKUプロパティを開き、ラミネートタイプと外部・内部の仕上げを一緒に保存します。
- Understand the one-to-one material rule and inherited display pictureLearn why a material can only attach to one SKU and why swapping a material resets the SKU thumbnail.
- 管理カタログから素材のデフォルト設定を更新する素材の設定をカタログレベルで変更すると、その素材のデフォルトになります。
- admin portalから仕上げ材を一括追加するadmin portalからの仕上げ材の一括入力の一環として、1つの仕上げ材を順を追って追加します。
- カスタムパネルの切断面にエッジバンド材を適用するパネルの左、右、前、または後ろのエッジを選択し、切断面のエッジバンド材を設定します。これはパネルのソースがカスタムとして指定されている場合にのみ適用されます。
- Choose countertop material through category, subcategory, group and SKUOpen the change-from-catalog carousel and pick the countertop material SKU through its category, subcategory and group.
- 内装仕上げと外装仕上げを個別に選択するPrelam InternalまたはPrelam Externalを設定すると、板の片面のみに仕上げを設定できます。
- 選択した素材を一括クローンで新しいグループにコピーする選択したエントリを新しいグループまたはフォルダに一度にクローンして、素材のセットを複製します。
- キャビネット本体と扉材の見えるエッジと見えないエッジを区別するキャビネット本体と扉で見えるエッジと見えないエッジが正しく仕上がるよう、エッジバンドと材料を割り当てます。
- 材料のパネル数をドリルダウンしてパネルを確認する材料のパネル数を開くと、その材料を使用している個々のパネルを確認できます。
- Clone SKU entriesで素材を複製し、そのプロパティを設定するClone SKU entriesでカタログから素材を複製し、複製した素材に独自のコードとプロパティを設定します。
- パネルの種類ごとにパネルの端部を編集し、素材を適用します引き出しのキャパスパネルと引き出しの底板(タンデムボトム)を区別して、素材を正しく適用します。
- 木製キャビネットのラミネーションに対して'has grain'を有効にする木製キャビネットのラミネーションに対して'has grain'オプションをオンにすると、木目の方向が正しく処理されます。
- 仕上げを除いた芯材の厚さを入力してください芯材のSKUプロパティを編集する際は、仕上げを除いた生板の厚さを入力してください。
- Select BrandsとApplyを使って、ブランド別にカタログの素材を絞り込む素材カタログを希望するブランドに絞り込み、選択を適用すると、そのブランドのみが表示されます。
- 背パネルとその他の芯材の厚さの指定方法背パネルの芯材や、MRグレード合板などのその他の芯材がどの厚さで指定されるかを説明します。
- 制約とルールが素材、仕上げ、価格設定、金物をどのように制御するか制約とルールが、どの素材と仕上げを組み合わせられるか、価格設定がどのように動作するか、金物と仕上げが自動的にどのように適用されるかを学びます。
- 芯材に内装仕上げ材と外装仕上げ材をリンクする芯材の内面と外面に現れる仕上げ材は、Lamination Typeタブから添付します。
- ラミネート無垢材をリンクして外観色を自動更新するラミネート無垢材をリンクすると、リンクしたラミネートに合わせて外観色が自動的に更新されます。
- 倉庫材料システムで金物のエッジバンドを管理する金物のエッジバンドは倉庫材料システム内で管理されます。
- ピッカーツールまたはアイテムの三点メニューから素材設定を開く素材の設定は、アイテムの三点メニューから、またはビューポートで素材をピックして開き、その設定で制御される内容を確認します。
- デザインでウェアハウスのラミネート仕上げを使用するAdd from Warehouseからブランドのラミネート仕上げを取り込むと、仕上げセクションに表示され、デザインに適用できるようになります。
- Add glass variants as separate catalogue entriesAdd frosted, tinted and other glass variants to the catalogue as separate entries.
- Add rates for materials even if not currently usedGive every material a rate so that any material a designer later uses is not passed to the client without a price.
- Add unbranded materials and reusable 3D objectsUpload high-resolution images as materials and let an admin add common 3D objects for reuse.
- Apply inner and outer laminate materials separatelySelect inner laminate and outer laminate separately when applying materials in the design.
- Change glass properties from imported catalogue materialUse the property controls in the material panel to change the properties of the selected catalogue material, such as imported glass.
- Check a unit's material serial number to spot cloned materialsPoint at a unit's finish material name to read its serial number and confirm the material is a genuine catalogue item.
- Clone glass and hardware rather than building from scratchPrefer cloning an existing warehouse SKU for glass and hardware so the new item behaves correctly.
- Edit finish and shutter reduction separately on a profileChange a profile's finish and shutter reduction independently, since editing one never updates the other.
- Enable the catalogue-side setting for glass shelf annotationsTurn on the catalogue-side setting so glass shelves appear in the annotation style used for shelf types.
- Fill the display image column in a material import sheetPut the display image file name with its extension in the display image column so the material catalogue import sheet is accepted.
- Filter finishes by brand and finish typeNarrow the finish list by a specific brand and by finish types such as fabrics and cement finishes.
- Filter finishes by brand name and add them to your catalogueFilter the finish list by a brand name and apply it so only that brand's items are shown.
- Fix an edgeband that no longer resolves after its linked SKU is deletedLearn why a design edgeband stops resolving to a valid catalogue SKU when the linked edgeband SKU is deleted from the catalogue admin.
- How a finish SKU's grain is stored and shownLearn how a finish SKU's grain is stored as the default additional property 'Has Grain' (has_grain) and where design QC mode displays it per finish.
- 背板のリンクが芯材の厚さに従う仕組み芯材を選択すると、対応する背板の材質と厚さが自動的に設定される様子をご覧ください。
- How custom finishes are named separately from the base materialLearn how a custom finish is built by applying a finish onto a core material.
- How shutter core, edgeband and handle settings affect cabinetsLearn how a chosen shutter core, the Edgeband panel types and a handle's Shutter Height Reduction change the cabinets you place.
- 芯材のリンクによって扉の仕上げが決まる仕組みキャビネットの扉の見える仕上げは、芯材そのものではなく、カタログで芯材にリンクされた仕上げから決まることを学びます。
- 背板の材料ソースをキャ carcass の背中コアにリンクする背板の材料ソースをキャ arcass の背中コアにリンクすることで、背板に使用する材料を制御できます。
- Pick external and internal finishes in the Lamination Type tabPick each finish section in five steps and confirm the saved finishes after applying and reopening the SKU.
- Price glass clips per cabinet with corner or center variantsDefine the quantity rule once so glass clip pricing applies consistently across every cabinet.
- Save model number, name, thickness and material info for catalog finishesRecord the model number, name, thickness and material details, including colour and texture, when saving a finish in the catalogue.
- Set core to 23mm for 25mm post-laminated thicknessSet the core thickness to 23mm in the admin portal so that adding 1mm laminate on each side yields the 25mm finished thickness.
- Set default core material in construction style without locking finishesSet the default shutter core material and carcass edgeband material when you create a construction style, without locking the finishes.
- Set grain on multiple finishes at once with bulk editMark grain on several finishes together by selecting them in the catalogue and applying it once through bulk edit.
- 芯材のラミネートタイプと連動する背板芯材を設定します芯材のラミネートタイプを選択し、Edit SKU Propertiesでその背板芯材をリンクします。
- Set material properties at creation and publish selected materialsSet properties such as finish type while creating a material so designers do not need to adjust them later.
- Set up material properties, textures and templatesLearn how the Material Properties modal handles color and texture bases, texture uploads, map slots and material templates so you can configure finish materials correctly.
- Shorten material display names from the admin catalogue settingsEdit the material name in the admin/catalogue settings so cutlist labels show a shorter name.
- Toggle material visibility per material in the catalogueToggle visibility for each material in the catalogue so only the materials you need are shown.
- Understand core material thickness standardsLearn how core material thickness options vary by board type, with 18mm the default carcass thickness and standard defaults also defined for back panels.
- Understand the material count next to a subcategory headingLearn what the number such as '163 plus' beside a subcategory heading means and how scrolling down reveals more materials.
- Use rattan designs and fabric materials from the catalogueFind the rattan designs and fabric materials already in the catalogue and use them in your designs.
- 属性・ブランド・仕上げを設定して新しいSKUをカタログに追加するカタログSKUを作成し、構造・素材・金物・付属品・幅木・仕上げの属性を入力します。上面図とブランドを設定し、仕上げの詳細を定義します。
- 左パネルからキャビネットの素材と仕上げを変更するSelect a unit を選択し、左パネルから素材を変更します。お客様の色に合うまで、必要な回数だけ選択し直してください。
- カテゴリとサブカテゴリの下で仕上げを作成し、一括複製する仕上げカタログに仕上げを追加し、ブランドで絞り込み、一括複製して類似の項目を一度に多数作成できます。
- カタログに不足している金物と材料を追加する価格設定や設計に使用する前に、Add hardware、芯材、仕上げ材をadmin portalに追加してください。
- キャビネットを複製せずに材質と取っ手を変更するSwap the material or handle on cabinets you already have instead of duplicating them.
- Link SKUs to core material via SKU propertiesLink SKUs to a core material so the material association is applied to them.
- 材料情報とともに新しいエッジバンドSKUを追加するHardware > Edge Bandsで新しいエッジバンドSKUを追加し、厚さ、Tape Width、必須の材料情報を入力します。
- ラミネートコードなしでドアと窓の素材を扱うドアと窓にはラミネートコードや同様のカタログコードは不要なため、コードなしで扱い、素材を別途インポートできます。
- Add non-handle, handle profiles and glass before shutter configurationSet up the profiles and glass types your shutter system needs before you map them in a shutter system configuration.
- 他の厚さのグループと芯材を複製するグループまたはガラス芯材を複製し、厚さの値を変更すると、同じ板材を別の厚さで提供できます。
- 編集する前に、所有していないデフォルトの芯材を複製するデフォルトの芯材を複製すると、編集できる所有エントリが得られます。オプションで一括複製や価格付きの複製も可能です。
- 芯材と金物のカテゴリー別品目リストを生成する芯材と金物の下でカテゴリーを選択すると、カタログがそのカテゴリーの品目リストを生成します。
- 仕上げ、材料、ラミネートSKUにブランドを割り当てる仕上げの材料情報を編集するとき、材料を作成するとき、またはSKUプロパティを設定するときに、保存済みのブランドを選択します。
- ラミネートまたは仕上げ材を複製して名前を変更するウェアハウスにないラミネートまたは仕上げ材は、似たものを複製して名前を変更することで作成します。
- 素材のプレラミ版とポストラミ版に別々のSKUを作成する同じ芯材のプレラミネート版とポストラミネート版にそれぞれ独自のSKUを付けて、仕上げリストを分けておきます。
- 仕上げと品番で金物を見つけるCatalog Hardware を開き、仕上げで一覧を絞り込み、サブカテゴリを開いて品番を検索すると、特定の金物部品が見つかります。
- ラミネートとカテゴリのタグが仕上げと素材の組み合わせをどのように構成するかラミネートまたはカテゴリに付けたタグが、製品に提供される仕上げ、素材、価格の組み合わせをどのように決めるかを説明します。
- 素材とユニットタイプ別にSKUをサブカテゴリーに整理するデザイナーが適切なセットから選んで配置できるよう、SKUをユニットタイプと素材で分けてサブカテゴリーにグループ化します。
- コピーした列GとHをCSVとして保存し、素材の一括更新を適用しますCSVファイルを使用して、クラウン仕上げなどの素材をシステム内で一括編集・更新します。
- 厚さとラミネーション特性を指定してハードウェアの芯材を設定するハードウェアの芯材を厚さとラミネーションとともに定義すると、SKUや仕上げ材に紐付けられるようになります。
- 仕上げSKUの素材、紐付けるエッジバンド、一括画像アップロードを設定する仕上げSKUの素材プレビュー、テクスチャ、ラッピング、テンプレートを設定して保存し、エッジバンドを紐付け、画像付きのCSVからSKUを一括作成します。
- ルール条件を機能させるためにマテリアルに一括でタグを付けるadmin portalでタグを作成し、カタログから一度に多数のマテリアルに適用します。ルールでは個々のマテリアルの代わりにタグを参照できます。
- 素材の編集後にSKUサムネイルを更新するカタログ素材を編集した後はキャッシュを更新し、新しい色やその他の更新値がデザインに反映されるようにします。
- Clone a material group and link the new finishClone a material group, pick its destination, and link the new finish to the right core material.
- Group finishes into subcategoriesCreate subcategories to group finishes such as solids, glossy, linen and wooden.
- デザイン制約によって仕上げが素材とSKUにどのように対応付けられるかデザイン制約によって、デザイナーが素材ごとに表示できる仕上げをどのように制御するか、また、対応付けられたカテゴリとSKUがどのように定義されるかを学びます。
- Price different brands and thicknesses with copied materialsCopy or clone a material entry so different brands and thicknesses carry their own cost while keeping manufacturing details.
- Refresh design portal cache after changing linked SKU materialsSave the linked material change, then refresh the cache in the design portal settings so designs pick it up.
- Tag non-PU finishes to enable premilling in designsAdd tags to non-PU finishes in bulk so premilling can be enabled in designs.
その他のガイド 7
すべて表示(7)
- 壁付きユニットとベースユニットに別々のエッジバンドを適用するすべてのキャビネットに1本のエッジバンドを使うのではなく、壁付きユニットとベースユニットに別々にエッジバンドを適用します。
- 組織が実際に使用している項目のみを残してカタログを整理するカタログを組織が実際に使用している材料と金物のみに絞り込み、正確で管理しやすい状態に保ちます。
- Prelam Both とリンクした化粧板でプレラミネート合板を設定するPrelam Both を設定し、化粧板をリンクすると、その合板を使用したときに両面の仕上げとして自動的に表示されます。
- 積層タイプがパネルの総厚を決める仕組み芯材に設定された積層タイプによって、入力した厚みに仕上げ材が含まれるか、芯材のみかが決まる仕組みをご確認ください。
- Change catalog settings via preferencesSet catalog settings such as core material through preferences so the option can be selected.
- Import a saved style into the bulk structure editorLoad a saved style such as a kitchen base style into the editor for all selected units and change only the core material.
- Use catalog manager filters to find existing laminates and itemsFilter the catalogue by properties such as matte finish and high gloss laminates to find the items you need.