마감재, 자재 및 엣지 밴드
가이드: 131
- 엣지 밴드가 마감재에 자동으로 연결되는 방식수납장의 마감재가 엣지 밴드를 어떻게 결정하는지, 엣지 밴드가 누락되었을 때 연결을 어디에서 확인하는지 알아보세요.
- 유닛의 자재 패널에서 몸체와 셔터 코어 자재를 변경합니다유닛의 자재 패널을 열고 두께 드롭다운에서 셔터와 몸체 코어 자재를 설정합니다.
- Edgeband Linking로 패널의 엣지밴드 마감을 재정의Edgeband Linking 드롭다운에서 옵션을 선택하여 유닛과 별개로 개별 패널의 엣지밴드 마감을 설정하세요.
- 마감재 카탈로그에 라미네이트 하위 카테고리 추가마감재 카탈로그에 마감재를 추가하기 전에 가죽 라미네이트 같은 새 라미네이트 하위 카테고리를 만드세요.
- 카탈로그에서 심재를 생성하고 제품 두께를 업데이트하세요제품의 세부 정보를 업데이트하고 페이지를 다시 로드하여 두께를 변경한 다음, 캐비닛 셔터와 옷장 구성 요소를 새 심재로 전환하세요.
- 카탈로그에서 기본 몸통재와 도어재 설정수납장 또는 옷장 항목을 열고 도어 마감재와 도어 심재를 설정하면 새 수납장에 자동으로 적용됩니다.
- 카탈로그에 플렉스 합판 같은 사용자 지정 재료 추가곡면 또는 유연한 패널용 플렉서블 합판처럼 카탈로그에 없는 재료를 만들어 디자인과 자재 목록에서 사용할 수 있게 합니다.
- 프리라미네이트 마감이 양면에 라미네이트를 적용하는 방법프리라미네이션 마감 옵션이 패널 양면에 라미네이트를 적용하는 방법과 추가로 선택해야 할 사항을 알아보세요.
- 재료 카탈로그에서 심재를 업데이트재료 카탈로그의 심재 항목을 편집하여 캐비닛에 사용되는 판재를 변경합니다.
- Add materials via bulk create or line-by-line entryAdd materials to a category such as finishes either with the bulk create option or by entering the details line by line.
- 원판에 연결할 수 없는 엣지 밴드 수정엣지 밴드는 라미네이트나 마감이 적용된 보드에만 연결하세요. 원판에는 엣지 밴드를 붙일 수 없습니다.
- 캐비닛과 붙박이장의 기본 몸체 및 도어 재질 환경설정을 지정하세요기본 몸체 및 도어 재질 환경설정을 저장하면 모든 새 프로젝트의 주방 및 붙박이장 캐비닛이 이 설정으로 시작합니다.
- 모델 번호와 두께를 입력하여 카탈로그에 새 자재를 추가하세요필수 항목인 모델 번호와 두께를 입력하여 자재를 추가하면, 새로고침 후 design portal에서 사용할 수 있습니다.
- 코어 재료 라이브러리에 새 합판 두께 추가하드웨어 코어 재료 섹션에 새 합판 두께 항목을 만들어 라이브러리에서 사용할 수 있도록 하세요.
- Lamination Type 탭에서 프리램 보드의 마감재를 변경합니다Lamination Type 탭에서 프리램 보드의 외부 및 내부 마감재를 설정하여 올바른 마감재가 SKU에 적용되도록 합니다.
- 패널 두께의 심재 정의카탈로그에서 심재는 패널의 두께를 나타냅니다.
- Material QC로 디자인 전체에서 자재를 찾아 바꾸기선택한 자재가 적용된 모든 방과 패널을 확인한 뒤, 방별로 또는 디자인 전체에 대해 한 번에 바꿀 수 있습니다.
- 하드웨어 카테고리에서 심재와 맞춤 패널 찾기심재, 맞춤 패널, 라미네이트, 아크릴이 카탈로그에서 어디에 위치하는지 알아보고 올바르게 분류하세요.
- Linked SKUs을(를) 통해 엣지 밴드를 하드웨어 SKU에 연결Linked SKUs 섹션을 통해 엣지 밴드를 하드웨어 SKU에 연결하면 카탈로그에서 두 항목이 연결된 상태로 유지됩니다.
- CSV를 통해 사용자 정의 재료를 추가하고 SKU 및 원자재 가격을 입력하세요자체 비용이 있는 합판 두께와 재료를 직접 추가하고, 원자재의 원가, 세율 및 원하는 마진을 입력하여 판매 가격이 계산되도록 하세요.
- 한 번에 하나씩 복제하는 대신 마감재를 일괄로 추가하세요각 마감재를 복제하고 이름을 바꾸는 대신, 일괄 작업으로 여러 마감재를 한 번에 만드세요.
- 코어 소재 항목 삭제 및 다시 추가카탈로그에 필요할 때마다 코어 소재 항목을 삭제하고 다시 추가하세요.
- 캐러셀에서 라미네이트 마감재 찾기마감재 캐러셀에서 마감재 카드가 정렬되는 방식과 이름으로 라미네이트를 검색하는 방법을 알아보세요.
- How linked edgeband preference worksLearn how the admin preference "Favour Linked Edgeband Over Edgeband Source" decides which edgeband the system follows.
- 마감재 드롭다운에 자재 표시하기카탈로그의 마감재 섹션에서 자재를 생성하거나 선택하면 마감재 드롭다운에 표시됩니다.
- 카탈로그 설정에서 시트당 세금 포함 심재 가격을 설정하세요심재의 가격을 책정하려면 해당 자재의 설정을 열고 SQ properties pricing을 편집하세요. 사용하지 않는 자재는 카탈로그에서 제거하세요.
- admin portal에서 심재 두께를 설정하세요admin portal에서 심재 두께를 한 번 설정하고, 얇은 판재가 필요할 때는 자체 두께를 가진 별도의 심재를 만드세요.
- 창고에서 추가한 마감재의 가격 설정디자인과 견적에서 사용할 수 있도록 추가한 라미네이트 또는 마감재에 가격을 입력하세요.
- 유리 카탈로그의 glass 항목에 유리를 저장하세요가격 책정에 사용할 수 있도록 유리 카탈로그의 glass 항목에 유리를 저장하세요.
- 시공 스타일을 사용하여 반복적인 수동 자재 입력을 피하세요시공 스타일을 적용하면 미리 정의된 자재 설정, 치수, 사이징 규칙 및 마감이 필드마다 입력할 필요 없이 여러 유닛에 한 번에 적용됩니다.
- 마감재를 만들기 전에 마감재 하위 카테고리를 추가하세요마감재를 그 아래에 정리할 수 있도록 마감재 하위 카테고리를 만드세요.
- 창고에서 라미네이트와 엣지 밴드 추가하기브랜드 필터와 하위 카테고리 체크를 사용해 브랜드 마감재를 카탈로그에 가져오세요.
- 개별 SKU에 마감재와 마감 태그 연결각 SKU에 마감재를 연결하고 마감 항목 자체에 태그를 지정하여 마감재가 올바르게 인식되도록 하십시오.
- 유리 두께 변형을 별도 항목으로 카탈로그화유리 유형의 사용 가능한 각 두께를 별도 카탈로그 항목으로 정의하여 일반, 흑색 착색, 갈색 착색 유리를 두께별로 카탈로그화하십시오.
- Core material 두께 최대 25mm카탈로그에 생성된 내용을 기준으로 사용 가능한 심재 최대 두께를 알아보세요.
- 완성 두께를 고정하려면 코어를 프리램으로 정의하세요코어 소재를 프리램 보드로 정의하여 완성 패널 두께를 고정하면 이후에 라미네이트를 변경할 수 없습니다.
- 보드 최적화 문제를 방지하려면 라미네이트의 결 방향을 정의하세요보드 배치 최적화와 현장 설치가 원활하게 진행되도록 라미네이트의 추가 속성에서 결 방향을 설정하세요.
- 자재가 마감재, 심재, 엣지밴드로 어떻게 구분되는지카탈로그 자재가 마감재, 심재, 엣지밴드로 어떻게 그룹화되고 각 그룹이 배정을 위해 어떻게 나뉘는지 알아보세요.
- 몸통과 뒷판을 하나의 마감 코드에 연결admin portal에서 재료, 마감, 두께 속성을 연결하면 시스템이 자동으로 적용합니다. 그런 다음 prelam 보드 단위를 정의하고 속성을 설정하세요.
- 보이는 면과 보이지 않는 면의 몸체 엣지밴드 두께 설정admin portal에서 엣지밴드 사양을 구성하고, 몸체의 보이는 엣지밴드와 보이지 않는 엣지밴드를 각각 별도의 필드에 설정하세요.
- Lamination Type 탭에서 라미네이션 유형과 마감 연결을 설정하십시오코어 소재의 SKU 속성을 열고 라미네이션 유형을 외부 및 내부 마감과 함께 저장하십시오.
- 일대일 자재 규칙과 상속된 표시 사진 이해하기자재가 하나의 SKU에만 연결될 수 있는 이유와 자재를 교체하면 SKU 썸네일이 초기화되는 이유를 알아보세요.
- 관리자 카탈로그에서 자재의 기본 설정 업데이트카탈로그 수준에서 자재 설정을 변경하여 해당 자재의 기본값으로 설정하세요.
- Add finishes in bulk from the admin portalAdd a single finish step by step as part of bulk finish entry from the admin portal.
- 맞춤 패널 가장자리에 재단 엣지밴드 소재 적용패널의 왼쪽, 오른쪽, 앞 또는 뒤 가장자리를 선택하고 재단 엣지밴드 소재를 설정하세요. 이는 패널 소스가 맞춤으로 표시된 경우에만 적용됩니다.
- 카테고리, 하위 카테고리, 그룹 및 SKU를 통해 상판 재질을 선택하세요카탈로그에서 변경 캐러셀을 열고 카테고리, 하위 카테고리 및 그룹을 통해 상판 재질 SKU를 선택하세요.
- 내부 마감재와 외부 마감재를 각각 선택하세요보드의 한쪽 면에만 마감재를 적용하려면 Prelam Internal 또는 Prelam External을 설정하세요.
- 선택한 소재를 일괄 복제로 새 그룹에 복사선택한 항목을 새 그룹이나 폴더로 한 번에 복제하여 소재 세트를 복제합니다.
- 몸통과 도어 재료의 보이는 모서리와 보이지 않는 모서리 구분보이는 모서리와 보이지 않는 모서리가 몸통과 도어에서 올바르게 나오도록 엣지 밴딩과 재료를 지정하십시오.
- 자재의 패널 수를 드릴다운하여 패널을 확인하세요자재의 패널 수를 열어 해당 자재를 사용하는 개별 패널을 확인하세요.
- Clone SKU entries로 소재를 복제하고 속성을 설정하세요Clone SKU entries로 카탈로그에서 소재를 복제하고, 복제본에 고유 코드와 속성을 지정하세요.
- 패널 유형별로 패널 가장자리를 편집하고 재료를 적용하세요서랍 카파스 패널과 서랍 바닥 패널(탄뎀 바닥)을 구분하여 재료를 올바르게 적용하세요.
- 목재 캐비닛 라미네이션에 'has grain' 활성화결 방향이 올바르게 처리되도록 목재 캐비닛 라미네이션에 'has grain' 옵션을 켜세요.
- 마감재를 제외한 코어 재료 두께를 입력하세요코어 재료의 SKU 속성을 편집할 때 마감재를 제외한 원판 두께를 입력하세요.
- Select Brands와 Apply를 사용하여 브랜드별로 카탈로그 자재를 필터링하세요자재 카탈로그를 원하는 브랜드로 좁힌 다음 선택 항목을 적용하여 해당 브랜드만 표시하세요.
- 뒷판 및 기타 심재 두께를 지정하는 방법뒷판 심재와 MR 등급 합판 같은 기타 심재가 어떤 두께로 지정되는지 알아보세요.
- 제약 조건과 규칙이 자재, 마감, 가격 책정 및 하드웨어를 제어하는 방식제약 조건과 규칙이 어떤 자재와 마감이 결합되는지, 가격 책정이 어떻게 작동하는지, 하드웨어와 마감이 어떻게 자동으로 적용되는지 알아보세요.
- 코어 소재에 내부 및 외부 마감재 연결코어 소재의 내부 및 외부 표면에 드러나는 마감재를 해당 Lamination Type 탭에서 연결하세요.
- 라미네이트 솔리드 소재를 연결하여 외부 색상이 자동으로 업데이트되도록 하기라미네이트 솔리드 소재를 연결하면 외부 색상이 연결된 라미네이트에 맞춰 자동으로 업데이트됩니다.
- 창고 자재 시스템에서 하드웨어 엣지 밴드를 관리합니다하드웨어 엣지 밴드는 창고 자재 시스템에서 관리됩니다.
- Open material settings via picker tool or item three-dot menuOpen a material's settings either from the item's three-dot menu or by picking the material in the viewport, then review what those settings control.
- 디자인에 창고 라미네이트 마감재 사용하기Add from Warehouse을 통해 브랜드 라미네이트 마감재를 가져오면 마감재 섹션 아래에 표시되며 디자인에 적용할 수 있습니다.
- Add glass variants as separate catalogue entriesAdd frosted, tinted and other glass variants to the catalogue as separate entries.
- Add rates for materials even if not currently usedGive every material a rate so that any material a designer later uses is not passed to the client without a price.
- Add unbranded materials and reusable 3D objectsUpload high-resolution images as materials and let an admin add common 3D objects for reuse.
- Apply inner and outer laminate materials separatelySelect inner laminate and outer laminate separately when applying materials in the design.
- Change glass properties from imported catalogue materialUse the property controls in the material panel to change the properties of the selected catalogue material, such as imported glass.
- Check a unit's material serial number to spot cloned materialsPoint at a unit's finish material name to read its serial number and confirm the material is a genuine catalogue item.
- Clone glass and hardware rather than building from scratchPrefer cloning an existing warehouse SKU for glass and hardware so the new item behaves correctly.
- Edit finish and shutter reduction separately on a profileChange a profile's finish and shutter reduction independently, since editing one never updates the other.
- Enable the catalogue-side setting for glass shelf annotationsTurn on the catalogue-side setting so glass shelves appear in the annotation style used for shelf types.
- Fill the display image column in a material import sheetPut the display image file name with its extension in the display image column so the material catalogue import sheet is accepted.
- Filter finishes by brand and finish typeNarrow the finish list by a specific brand and by finish types such as fabrics and cement finishes.
- Filter finishes by brand name and add them to your catalogueFilter the finish list by a brand name and apply it so only that brand's items are shown.
- Fix an edgeband that no longer resolves after its linked SKU is deletedLearn why a design edgeband stops resolving to a valid catalogue SKU when the linked edgeband SKU is deleted from the catalogue admin.
- How a finish SKU's grain is stored and shownLearn how a finish SKU's grain is stored as the default additional property 'Has Grain' (has_grain) and where design QC mode displays it per finish.
- 뒷판 연동이 코어 재료 두께를 따르는 방식코어 재료를 선택하면 일치하는 뒷판 재료와 두께가 자동으로 설정되는 방식을 확인하세요.
- How custom finishes are named separately from the base materialLearn how a custom finish is built by applying a finish onto a core material.
- How shutter core, edgeband and handle settings affect cabinetsLearn how a chosen shutter core, the Edgeband panel types and a handle's Shutter Height Reduction change the cabinets you place.
- 코어 재료 연결에 따라 셔터 마감이 결정되는 방식캐비닛 셔터의 겉으로 보이는 마감은 코어 재료 자체가 아니라 카탈로그에서 코어 재료에 연결된 마감에서 나온다는 점을 알아보세요.
- 뒷판 재질 소스를 몸통 뒷 코어에 연결뒷판 재질 소스를 몸통 뒷 코어에 연결하여 뒷판에 사용되는 재질을 제어하세요.
- Pick external and internal finishes in the Lamination Type tabPick each finish section in five steps and confirm the saved finishes after applying and reopening the SKU.
- Price glass clips per cabinet with corner or center variantsDefine the quantity rule once so glass clip pricing applies consistently across every cabinet.
- Save model number, name, thickness and material info for catalog finishesRecord the model number, name, thickness and material details, including colour and texture, when saving a finish in the catalogue.
- Set core to 23mm for 25mm post-laminated thicknessSet the core thickness to 23mm in the admin portal so that adding 1mm laminate on each side yields the 25mm finished thickness.
- Set default core material in construction style without locking finishesSet the default shutter core material and carcass edgeband material when you create a construction style, without locking the finishes.
- Set grain on multiple finishes at once with bulk editMark grain on several finishes together by selecting them in the catalogue and applying it once through bulk edit.
- 코어 자재의 라미네이션 유형과 연결된 뒷판 코어 설정코어 자재의 라미네이션 유형을 선택하고 Edit SKU Properties에서 뒷판 코어 자재를 연결하세요.
- Set material properties at creation and publish selected materialsSet properties such as finish type while creating a material so designers do not need to adjust them later.
- Set up material properties, textures and templatesLearn how the Material Properties modal handles color and texture bases, texture uploads, map slots and material templates so you can configure finish materials correctly.
- Shorten material display names from the admin catalogue settingsEdit the material name in the admin/catalogue settings so cutlist labels show a shorter name.
- Toggle material visibility per material in the catalogueToggle visibility for each material in the catalogue so only the materials you need are shown.
- Understand core material thickness standardsLearn how core material thickness options vary by board type, with 18mm the default carcass thickness and standard defaults also defined for back panels.
- Understand the material count next to a subcategory headingLearn what the number such as '163 plus' beside a subcategory heading means and how scrolling down reveals more materials.
- Use rattan designs and fabric materials from the catalogueFind the rattan designs and fabric materials already in the catalogue and use them in your designs.
- 속성, 브랜드, 마감을 포함한 새 SKU를 카탈로그에 추가카탈로그 SKU를 생성하고 구조, 재료, 철물, 액세서리, 걸레받이, 마감 속성을 입력한 뒤 상면도 이미지와 브랜드를 설정하고 마감 세부 정보를 정의합니다.
- 왼쪽 패널에서 캐비닛의 재질과 마감을 변경합니다Select a unit을 선택하고 왼쪽 패널에서 재질을 변경하세요. 고객의 색상에 맞을 때까지 필요한 만큼 다시 선택할 수 있습니다.
- 카테고리 및 하위 카테고리에서 마감재를 생성하고 대량 복제합니다마감재 카탈로그에 마감재를 추가하고, 브랜드별로 필터링하며, 대량 복제하여 유사한 항목을 한 번에 여러 개 생성합니다.
- 카탈로그에 누락된 하드웨어와 자재 추가가격 책정이나 설계에 사용하기 전에 admin portal에서 Add hardware, 코어 자재, 마감 자재를 추가하세요.
- 캐비닛을 복제하지 않고 캐비닛의 재질과 손잡이 변경이미 있는 캐비닛을 복제하는 대신 재질이나 손잡이를 교체하세요.
- SKU 속성으로 SKU를 심재에 연결SKU를 심재에 연결하면 해당 SKU에 자재 연결이 적용됩니다.
- 재질 정보와 함께 새 엣지 밴드 SKU 추가Hardware > Edge Bands에서 두께, Tape Width 및 필수 재질 정보를 입력하여 새 엣지 밴드 SKU를 추가하십시오.
- 라미네이트 코드 없이 문과 창호 자재를 처리하기문과 창호에는 라미네이트 코드나 이와 유사한 카탈로그 코드가 필요하지 않으므로, 코드 없이 처리하고 해당 자재를 별도로 가져올 수 있습니다.
- 셔터 구성 전에 손잡이 없는 프로파일, 손잡이 프로파일 및 유리를 추가하십시오.셔터 시스템 구성에서 매핑하기 전에 셔터 시스템에 필요한 프로파일과 유리 유형을 설정하십시오.
- 다른 두께용 그룹 및 심재 복제그룹 또는 유리 심재를 복제하고 두께 값을 변경하여 같은 판재를 다른 두께로 제공할 수 있습니다.
- 편집하기 전에 소유하지 않은 기본 심재를 복제하십시오기본 심재를 복제하여 편집할 수 있는 소유 항목을 만드십시오. 원하는 경우 대량으로, 가격과 함께 할 수 있습니다.
- 심재와 철물에 대한 카테고리별 품목 목록 생성심재와 철물 아래에서 카테고리를 선택하면 카탈로그가 해당 카테고리의 품목 목록을 생성합니다.
- 마감재, 재료 또는 라미네이트 SKU에 브랜드 지정마감재의 재료 정보를 편집하거나, 재료를 생성하거나, SKU 속성을 설정할 때 저장된 브랜드를 선택하세요.
- 라미네이트 또는 마감재 복제 및 이름 변경창고에 없는 라미네이트 또는 마감재는 비슷한 항목을 복제하고 이름을 변경하여 만드세요.
- 한 자재의 prelam 버전과 postlam 버전에 대해 별도의 SKU를 생성합니다동일한 심재의 pre-laminated 버전과 post-laminated 버전에 각자의 SKU를 부여하여 마감 목록이 분리되도록 하십시오.
- Find a hardware item by finish and item numberOpen Catalog Hardware, narrow the list by finish, then open the subcategory and search the item number to find a specific hardware component.
- 라미네이트와 카테고리의 태그로 마감재와 재료 조합을 구성하는 방법라미네이트 또는 카테고리에 적용된 태그가 제품에 제공되는 마감재, 재료 및 가격 조합을 어떻게 결정하는지 알아보세요.
- 재질 및 유닛 유형별로 SKU를 하위 카테고리로 구성디자이너가 올바른 세트에서 선택하고 배치할 수 있도록 SKU를 하위 카테고리로 그룹화하고, 유닛 유형과 재질로 구분합니다.
- 복사한 G열과 H열을 CSV로 저장하여 자재 일괄 업데이트를 적용하세요CSV 파일을 사용하여 시스템에서 크라운 마감재와 같은 자재를 일괄 편집하고 업데이트하세요.
- 두께와 라미네이션 속성으로 하드웨어 심재 설정SKU와 마감재에 연결할 수 있도록 하드웨어 심재의 두께와 라미네이션을 정의하세요.
- Set up a finish SKU's material, linked edgeband and bulk image uploadConfigure a finish SKU's material preview, texture, wrapping and template, save it, link an edgeband, and bulk-create SKUs from a CSV with images.
- 규칙 조건을 적용하기 위해 재료에 태그를 일괄 지정하세요admin portal에서 태그를 만들고, 카탈로그에서 여러 재료에 한 번에 적용하면, 규칙이 개별 재료 대신 태그를 참조할 수 있습니다.
- 재질 편집 후 SKU 썸네일 업데이트카탈로그 재질을 편집한 후 캐시를 새로 고쳐 새 색상과 기타 업데이트된 값이 디자인에 반영되도록 하세요.
- Clone a material group and link the new finishClone a material group, pick its destination, and link the new finish to the right core material.
- Group finishes into subcategoriesCreate subcategories to group finishes such as solids, glossy, linen and wooden.
- 디자인 제약 조건이 마감재를 자재 및 SKU에 매핑하는 방법디자인 제약 조건이 디자이너가 특정 자재에 대해 볼 수 있는 마감재를 제어하는 방법과 매핑된 카테고리 및 SKU가 정의되는 방식을 알아보세요.
- Price different brands and thicknesses with copied materialsCopy or clone a material entry so different brands and thicknesses carry their own cost while keeping manufacturing details.
- Refresh design portal cache after changing linked SKU materialsSave the linked material change, then refresh the cache in the design portal settings so designs pick it up.
- Tag non-PU finishes to enable premilling in designsAdd tags to non-PU finishes in bulk so premilling can be enabled in designs.
다른 가이드 7
모두 보기 (7)
- 벽걸이장과 하부장에 엣지 밴딩을 각각 적용모든 장에 하나의 엣지 밴드를 사용하지 않고, 벽걸이장과 하부장에 엣지 밴딩을 각각 적용합니다.
- 조직에서 실제로 사용하는 항목만 유지하여 카탈로그 정리카탈로그를 조직에서 실제로 사용하는 자재 및 하드웨어로 축소하여 정확하고 관리하기 쉽게 유지하세요.
- Prelam Both 및 연결된 라미네이트로 사전 적층 합판을 구성하십시오Prelam Both를 설정하고 라미네이트를 연결하여 합판 사용 시 두 마감재로 자동 표시되도록 하십시오.
- 라미네이션 유형이 전체 패널 두께를 결정하는 방식코어 소재에 설정된 라미네이션 유형이 입력한 두께에 마감재가 이미 포함되어 있는지, 아니면 코어만인지를 어떻게 결정하는지 확인하세요.
- Change catalog settings via preferencesSet catalog settings such as core material through preferences so the option can be selected.
- Import a saved style into the bulk structure editorLoad a saved style such as a kitchen base style into the editor for all selected units and change only the core material.
- Use catalog manager filters to find existing laminates and itemsFilter the catalogue by properties such as matte finish and high gloss laminates to find the items you need.