가구 카탈로그
가이드: 158
- 속성, 브랜드, 마감을 포함한 새 SKU를 카탈로그에 추가카탈로그 SKU를 생성하고 구조, 재료, 철물, 액세서리, 걸레받이, 마감 속성을 입력한 뒤 상면도 이미지와 브랜드를 설정하고 마감 세부 정보를 정의합니다.
- 개별 편집 대신 SKU 일괄 편집각 SKU를 개별적으로 편집하지 않고 일괄 편집 기능으로 여러 SKU를 한 번에 업데이트하세요.
- 구독한 채널의 SKU를 카탈로그로 가져오기채널이 공개 공유되고 구독이 승인되면, 구독한 판매 채널의 SKU를 자신의 조직 또는 사업부에 추가하세요.
- 가격 섹션에서 SKU의 판매 가격 변경SKU를 하나씩 편집하는 대신 일괄 편집 CSV 흐름을 통해 여러 SKU에 동일한 가격 변경을 한 번에 적용하세요.
- 왼쪽 패널에서 캐비닛의 재질과 마감을 변경합니다Select a unit을 선택하고 왼쪽 패널에서 재질을 변경하세요. 고객의 색상에 맞을 때까지 필요한 만큼 다시 선택할 수 있습니다.
- 코너 유닛용 별도 제작 스타일 만들기코너 유닛에 자체 제작 스타일을 지정하여 일반 캐비닛 스타일과 함께 사용할 수 있게 합니다.
- 캐비닛에 프로파일 셔터 시스템 설정하기캐비닛 셔터 구성을 열고 셔터 시스템으로 이동한 뒤 셔터 시스템 구성을 추가하여 설정하세요.
- 크기별 가격과 수량 로직으로 하드웨어 SKU 설정각 하드웨어 항목을 크기와 크기별 가격으로 정의한 다음, 길이 기준 또는 캐비닛당 수량 로직을 선택하고 창고에서 경첩을 추가하세요.
- 치수와 배치를 설정하도록 SKU 일괄 편집카테고리의 일괄 편집을 열어 여러 SKU의 치수와 배치를 한 번에 업데이트하세요.
- CSV로 하드웨어 SKU 및 판매 채널 일괄 편집창고에서 하드웨어를 필터링하여 추가한 다음, CSV 다운로드를 사용하여 개별 SKU, 판매 채널, 가격, 마진 및 세금을 일괄 편집하세요.
- 캐비닛을 복제하지 않고 캐비닛의 재질과 손잡이 변경이미 있는 캐비닛을 복제하는 대신 재질이나 손잡이를 교체하세요.
- 소유 SKU와 스토어 SKU에 대해 표시되는 Edit SKU Properties 탭 확인조직이 소유한 코어 자재, 다른 스토어에서 추가된 코어 자재 또는 복제본에 대해 Edit SKU Properties에 표시되는 탭과 필드를 확인하세요.
- 옷장 레벨 구성에서 설계한 유닛을 관리자 카탈로그에 게시옷장 레벨 구성에서 관리자에게 게시하여 설계한 유닛을 카탈로그에 저장하세요.
- OBJ 형식으로 맞춤형 붙박이장 도어 디자인 업로드직접 만든 붙박이장 도어 디자인을 OBJ 파일로 플랫폼에 업로드하세요.
- 하드웨어 SKU의 가격 책정 단위 변경하드웨어 SKU를 기본 가격 책정 단위에서 사용자 지정 단위로 전환하여, 가격을 책정하는 방식대로 품목이 집계되도록 하십시오.
- 관리자 카탈로그에서 가구가 구성되는 방식관리자 카탈로그의 가구 섹션에 모듈형 가구와 비모듈형 가구가 어떻게 포함되는지, 모듈형 품목이 카테고리로 묶이고 그 아래에 개별 유닛이 추가되는 방식을 확인하세요.
- SKU 속성으로 SKU를 심재에 연결SKU를 심재에 연결하면 해당 SKU에 자재 연결이 적용됩니다.
- 코드나 품번을 변경하지 않고 SKU 이름 바꾸기SKU의 속성을 편집하고 저장하면 언제든지 SKU의 이름을 변경할 수 있으며, SKU의 코드와 품번은 그대로 유지됩니다.
- 재질 정보와 함께 새 엣지 밴드 SKU 추가Hardware > Edge Bands에서 두께, Tape Width 및 필수 재질 정보를 입력하여 새 엣지 밴드 SKU를 추가하십시오.
- Bulk edit wardrobe SKU structure to apply construction changesApply a construction change across many wardrobe SKUs at once instead of editing each unit individually.
- 카탈로그 SKU를 편집하기 전에 SKU 소유권을 확인하세요SKU는 계정이 소유한 경우에만 편집할 수 있는 이유와 카탈로그에서 소유권이 표시되는 위치를 알아보세요.
- 중복 SKU를 삭제하고 SKU 그룹 전체를 한 번에 대량 복제합니다하나의 코드 아래에 있는 중복 SKU를 제거하고 모든 SKU의 전체 그룹을 한 번에 복제합니다.
- 복제된 SKU의 이름과 치수 편집복제 후 새 SKU의 이름과 치수를 업데이트하여 디자이너가 design portal에서 해당 옵션을 볼 수 있도록 하세요.
- 캐비닛 또는 옷장을 카탈로그에 게시개별 유닛을 해당 구조에서 디비전, 하위 카테고리 및 카테고리 그룹으로 게시합니다.
- SKU 속성에서 셔터 디자인으로 셔터 가격 설정SKU 속성에서 셔터 디자인을 기준으로 단가를 설정하여 셔터 가격을 책정하고, 가격이 다른 변형은 별도의 SKU로 분리하세요.
- 커넥터 아래 하드웨어 카탈로그에 나사 SKU를 추가하십시오.커넥터 아래 하드웨어 카탈로그에 나사 SKU를 만든 다음, 새 그룹으로 복제하여 더 많은 사이즈를 추가하십시오.
- SKU, 그룹 및 전체 카테고리 일괄 삭제SKU, 그룹 또는 전체 카테고리를 선택하고 More 메뉴의 Delete selected SKUs 작업으로 제거하세요.
- 텍스처로 엣지 밴드 SKU를 복제하거나 새로 추가하세요기존 엣지 밴드 SKU를 복제하여 조정하거나, 지정된 치수와 다운로드한 텍스처로 새 엣지 밴드를 추가하여 새 엣지 밴드 변형을 만드세요.
- Machining Type을 통해 액세서리 SKU에 가공 도구 구성Machining Type을 선택하고 SKU에 기계와 도구를 저장하여 액세서리 SKU에 올바른 CNC 도구를 연결하세요.
- 수납장과 옷장의 도어 시스템 만들기카탈로그에서 수납장 또는 옷장의 도어 시스템을 만드세요.
- 색상 선택 혼동을 피하려면 색상별로 별도의 SKU를 생성하세요각 색상에 고유한 SKU를 부여하면 디자이너가 색상 단계를 건너뛰지 않고 올바른 SKU만 선택하면 됩니다.
- 일괄 편집 파일 또는 SKU에서 카탈로그 SKU 가격을 입력하세요카탈로그 SKU의 가격은 일괄 편집 가격 파일을 다운로드하여 작성한 후 업로드하거나, 개별 SKU에서 가격을 직접 편집하여 입력할 수 있습니다.
- design portal에서 SKU 캐시를 강제로 새로 고칩니다관리자 카탈로그 변경 사항을 디자인에 반영하는 데 가장 적합한 위치인 design portal에서 새로 고침 작업을 실행하십시오.
- 복합 SKU로 여러 캐비닛을 한 번에 배치하는 방법복합 SKU를 사용하면 여러 캐비닛을 하나의 SKU에 배치하여 모든 유닛이 고정된 배열로 함께 들어오도록 할 수 있습니다.
- 캐비닛 유형별로 표시되는 셔터 시스템 제한캐비닛 셔터 시스템 구성에 규칙을 만들어 디자이너가 선택한 캐비닛 또는 붙박이장 유형에 적용되는 셔터 시스템만 볼 수 있게 하십시오.
- 편집 속성을 통해 SKU를 하드웨어에 연결액세서리 SKU를 하드웨어 항목에 첨부하면 해당 SKU가 그 하드웨어와 함께 표시됩니다.
- 카탈로그에서 주방과 붙박이장 아이템을 배치하세요카탈로그에서 주방 가구를 골라 배치한 다음, 같은 방식으로 붙박이장 내부 부품과 서랍을 추가하세요.
- 하드웨어와 함께 설계된 캐비닛 구조를 카탈로그에 게시캐비닛 구조를 게시하면 재사용할 수 있게 되고 셔터 메커니즘 하드웨어가 자동으로 함께 저장됩니다.
- SKU 속성에서 J 및 C 고라 컷아웃을 포켓팅으로 설정J 및 C 고라 컷아웃의 가공 유형을 Pocketing으로 설정하고 올바른 공구를 선택하여 컷아웃이 올바르게 가공되도록 하십시오.
- SKU를 추가하고 치수와 두께를 설정하세요기본 높이, 너비, 깊이로 카탈로그 항목을 만든 다음, 구조 편집기를 열지 않고 크기와 두께를 조정하세요.
- 단일 SKU를 추가하고 필수 필드를 충족하세요그룹의 플러스 버튼에서 SKU 하나를 생성하고 Add SKU 양식이 적용하는 유효성 검사를 충족하세요.
- SKU 일괄 편집: 미리보기, 개별 모드와 공통 모드, 삭제된 SKUBulk Edit 마법사의 개별 SKU 그리드와 공통 'Editing All SKUs at Once' 모드가 확인 및 게시 전에 여러 SKU를 어떻게 변경하는지 알아보세요.
- 선택한 캐비닛에 구성 스타일 일괄 적용관리자에서 캐비닛을 선택하고 Bulk Actions를 사용하면 여러 캐비닛에 하나의 구성 스타일을 한 번에 적용할 수 있습니다.
- Create a standard SKU for a cabinet profileMake one SKU with a specific profile in the admin portal so designs can use it.
- 드래그 앤 드롭으로 사용할 수 있도록 admin portal에서 레벨러 연결구 SKU를 생성하세요해당 레인지의 카드를 생성하여 레벨러 연결구 SKU를 드래그 앤 드롭으로 사용할 수 있게 하세요.
- 한 자재의 prelam 버전과 postlam 버전에 대해 별도의 SKU를 생성합니다동일한 심재의 pre-laminated 버전과 post-laminated 버전에 각자의 SKU를 부여하여 마감 목록이 분리되도록 하십시오.
- SKU의 추가 속성 편집SKU의 자유 형식 키/값 속성을 검토하고 변경하며, 다른 사용자가 해당 SKU를 복제할 수 있는지 여부를 제어합니다.
- Get a SKU that has a 3D modelAdd a modelled SKU from the warehouse or clone a similar one when the exact product is missing.
- 하위/구성 SKU 가격이 판매 채널 전반에서 결정되는 방식하위 또는 구성 SKU가 사용자의 컨텍스트에서 어떤 가격을 적용받는지 결정하는 상속 단계를 따라가십시오.
- 카탈로그 트리에서 SKU와 그룹 이동메뉴의 이동 옵션을 사용하여 SKU 또는 전체 그룹을 기존 그룹으로 옮기십시오.
- SKU를 추가할 때 이름을 지정하고 나중에 이름을 변경할 수 있습니다admin portal에서 SKU를 추가할 때 필수 이름을 입력한 다음, SKU의 세부 정보를 편집하여 나중에 해당 이름을 변경할 수 있습니다.
- 대량 SKU 구조 편집기를 열고 구조 값을 설정하세요카탈로그 대량 작업 메뉴에서 편집기로 이동하여 왼쪽 축소, 오른쪽 도어 갭, 하부장 깊이, 후면 패널 옵션 등의 값을 설정하세요.
- 재질 및 유닛 유형별로 SKU를 하위 카테고리로 구성디자이너가 올바른 세트에서 선택하고 배치할 수 있도록 SKU를 하위 카테고리로 그룹화하고, 유닛 유형과 재질로 구분합니다.
- Publish SKUs to a sales channel and understand silent filteringLearn why publishing SKUs to a channel silently drops SKUs that are not in inventory and skips duplicates, and how removal behaves differently.
- Replace a copied leg SKU via manufacturing settingsReplace the SKU of a leg that comes from the connector folder but is not part of the catalogue by editing its connector in manufacturing settings.
- 고정 크기 또는 최소-최대 범위로 캐비닛 크기 제한각 캐비닛을 고정 크기 또는 최소 및 최대 크기 범위로 구성하여 디자이너가 해당 한도 내의 크기만 선택할 수 있도록 합니다.
- SKU 사용자 지정을 수동으로 저장하고 썸네일을 설정합니다save를 클릭하여 SKU 사용자 지정을 저장하고, 그 시점의 현재 보기를 SKU 썸네일로 설정합니다.
- Set up a finish SKU's material, linked edgeband and bulk image uploadConfigure a finish SKU's material preview, texture, wrapping and template, save it, link an edgeband, and bulk-create SKUs from a CSV with images.
- 삭제된 SKU가 가격 책정 및 디자인에 계속 표시되는 이유 이해카탈로그에 더 이상 존재하지 않는 SKU가 디자인 또는 가격 데이터에 계속 표시될 수 있는 이유를 알아보세요.
- 재질 편집 후 SKU 썸네일 업데이트카탈로그 재질을 편집한 후 캐시를 새로 고쳐 새 색상과 기타 업데이트된 값이 디자인에 반영되도록 하세요.
- admin portal에서 SKU 제약 조건을 보고 편집합니다admin portal을 열어 구성 요소의 최소/최대 캐비닛 너비와 깊이를 정의하는 제약 조건을 보고 편집합니다.
- SKU 복제 시 복사되는 항목과 기본 이름복제된 SKU가 정확히 무엇을 중복 생성하는지, 어떤 기본값을 채우는지, 그리고 절대 복사하지 않는 항목이 무엇인지 확인하세요.
- Add a new SKU and clone a catalogue groupAdd a SKU from a group card's + and clone a catalogue group through its two dialogs.
- 기존 SKU에 최소/최대 치수 규칙 추가기존 SKU에 최소 및 최대 깊이, 너비, 높이 규칙을 추가하여 시스템이 범위를 벗어난 입력을 차단하고 설계 오류를 방지하도록 합니다.
- Adjust unit height from the furniture unit menuChange the height of a furniture unit directly from its furniture unit menu.
- Attach CAM and manufacturing details via a drive link on the SKUUpload a display image for a hardware SKU and link its CAM or manufacturing details from a drive in the SKU record.
- Bulk Delete: SKU와 그룹을 영구 삭제Bulk Delete 흐름으로 카탈로그에서 원하지 않는 SKU와 해당 그룹을 정리하세요. 무엇이 삭제되고 무엇이 남는지 정확히 알 수 있습니다.
- Bulk edit SKUs across sales channels in the catalogueSelect your SKUs, choose the editing mode, tick the sales channels, then apply the change to all selected SKUs before publishing.
- Bulk edit SKUs from the Bulk actions toolbarSelect SKUs and use the Edit menu to change them in app, edit their SKU structure, or export and import a sheet.
- Change a SKU's unit via admin portal sales channel pricingChange the unit of a catalogue SKU such as edgeband without altering the overall project unit.
- Change light placement from base to ceiling in SKU propertiesStop lights from being placed on the floor by switching their placement option from base to ceiling, one SKU at a time or in bulk.
- Check presence in cabinets for a hardware cardFind out whether a hardware card is actually used in any cabinet before removing a duplicate.
- Clone SKUs in bulk into a new group and delete the originalsCopy a whole group of SKUs, or make an editable workspace-owned copy of a global profile or glass, and optionally delete the originals in the same operation.
- Create a core material SKU with code, thickness and textureAdd a core material SKU under Hardware > Core Materials with its procurement code and a texture image.
- Create a new 3D SKU by grouping and uploading an OBJ fileCreate a 3D SKU by grouping it and uploading an OBJ file, keeping in mind which catalogue categories cannot hold 3D models.
- 외부 서랍 스택 SKU를 처음부터 만들기그룹을 추가한 다음 SKU 구조를 편집하여 서랍 스택 SKU를 만드세요.
- Create matte and gloss variants by cloning a finish SKUClone a finish SKU and rename the copy to get matte and gloss variants, each with its own copied material and default price.
- Delete a connector that is in use by cabinetsReplace a connector in every cabinet that uses it, then delete the now-unused connector.
- Delete obsolete SKUs from the catalogue to avoid zero pricingDelete the old SKUs so they stop resolving to zero price.
- 품번이 없는 경우 카탈로그에서 사용하지 않는 SKU를 삭제합니다일치하는 품번이 없는 깊이 변형과 같이 사용하지 않는 SKU를 해당 설정 메뉴에서 제거합니다.
- Download SKUs from the warehouse into the catalogueDownload catalogue SKUs from the warehouse so they become available for use in designs.
- 승인되기 전 디자이너 소유 SKU 편집승인되지 않은 디자이너 생성 SKU를 누가 변경할 수 있는지, 다른 사용자의 편집 차단을 어떻게 해제하는지 알아보세요.
- Edit internal drawer structure via admin furniture drawer setsEdit the internal drawer structure from the admin portal under furniture drawer sets.
- Finalize bulk-created SKUs from the Bulk Actions pageAdd your SKU rows on the Bulk Actions Create SKUs page, then review them and use the Bulk Actions controls to apply and publish, which finalizes the upload.
- Hover over a SKU heading to see its full nameRead a truncated SKU name in full by hovering over its heading, and confirm which SKU is open from the properties panel.
- How consumable quantity is calculated across cabinetsLearn how the system calculates consumption consistently across cabinets instead of leaving it to the designer.
- How designer-created personal SKUs workLearn how personal SKUs stay visible only to their creator until they are approved into the organisation catalogue.
- How personal designer-created SKUs stay privateLearn why SKUs a designer creates as personal items are visible only to their owner and never to admins or other designers.
- Identify a placed cabinet's catalogue name via the eye iconDisplay the furniture name so you can trace the item back to its catalogue entry and correct its dimensions there.
- Link items to a global catalogue SKU you do not ownClone a global catalogue SKU into one of your own sub-categories so you can set links on the copy.
- Model number is now compulsory when saving a catalogue SKUA model number is mandatory on a catalogue SKU.
- Move a SKU to an existing group of the same category typeMove a SKU into an existing group by picking the destination group from the SKU's settings menu, as long as both groups belong to the same category type.
- Open the Component Editor from a SKU cardOpen a SKU's structure in the Component Editor to see its SKU Type and edit it with its own Save and Reset buttons.
- Open the component editor from SKU settingsOpen SKU settings and choose 'edit SKU structure' to open the component editor and build the cabinet itself.
- Price a single SKU via SKU properties advanced pricingSet a per-unit price for one SKU in its advanced pricing, with taxes and margin applied.
- Refresh SKU cache to restore global hardware in old designsRun a refresh SKU cache on old designs so they pull in the hardware logic originally set for the account.
- Refresh design portal cache after changing linked SKU materialsSave the linked material change, then refresh the cache in the design portal settings so designs pick it up.
- 카탈로그 편집 후 SKU를 선택하기 전에 페이지를 새로 고침하세요카탈로그를 편집한 후 페이지를 새로 고친 다음, cabinet catalogue로 이동하여 하부장, 서랍장, 인출장 등 해당 SKU 옆의 체크박스를 선택하세요.
- 점 세 개 메뉴를 통해 모든 캐비닛의 카탈로그 커넥터 교체커넥터가 사용되는 모든 곳에서 교체하고 기존 커넥터에 어떤 일이 발생하는지 확인하세요.
- Review, confirm and publish bulk SKU-structure changesFilter to the fields you changed, review them, then confirm and publish so the edits are applied to all selected SKUs.
- Set an SKU to take its price from constituentsChoose whether a catalogue SKU takes its price from a fixed CPU value or from its constituent materials.
- Understand catalogue image support for SKUsLearn that the catalogue only supports static SKU images uploaded in the admin catalogue.
- Use RSU to inspect the SKU behind a design componentFind out which SKU a design component actually uses by reading its details in RSU.
- Use dedicated corner units for corner cabinetsUse the catalogue's dedicated corner units when a cabinet sits in a corner instead of relying only on standard base units.
- 디자이너가 생성한 SKU가 카탈로그에 없는 이유디자이너로 생성한 SKU는 Catalog Manager가 승인할 때까지 비공개로 유지됩니다. 승인 시 달라지는 점은 다음과 같습니다.
- 모두 선택 및 일괄 작업으로 여러 SKU를 한 번에 일괄 편집목록의 모든 SKU를 선택하고 Bulk Actions을 통해 함께 편집하세요.
- Clone and bulk edit catalogue items to match SKUsClone existing catalogue items and bulk edit their sizes and names so they match specific SKUs.
- 캐비닛과 붙박이장의 기본 몸체 및 도어 재질 환경설정을 지정하세요기본 몸체 및 도어 재질 환경설정을 저장하면 모든 새 프로젝트의 주방 및 붙박이장 캐비닛이 이 설정으로 시작합니다.
- Add hardware 및 SKU 수준의 액세서리 가격 책정Advanced Pricing의 판매 채널 아래에 하드웨어와 액세서리를 추가하여 SKU별로 가격을 책정하세요.
- 여러 SKU의 추가 속성 일괄 편집여러 SKU의 추가 속성과 제조 세부 정보를 한 번에 변경한 뒤 디자인을 새로 고치십시오.
- Linked SKUs을(를) 통해 엣지 밴드를 하드웨어 SKU에 연결Linked SKUs 섹션을 통해 엣지 밴드를 하드웨어 SKU에 연결하면 카탈로그에서 두 항목이 연결된 상태로 유지됩니다.
- CSV를 통해 사용자 정의 재료를 추가하고 SKU 및 원자재 가격을 입력하세요자체 비용이 있는 합판 두께와 재료를 직접 추가하고, 원자재의 원가, 세율 및 원하는 마진을 입력하여 판매 가격이 계산되도록 하세요.
- 매장 SKU가 없는 자동 생성 패널 처리매장 SKU가 없는 자동 생성 패널이 무엇인지, 그리고 이를 별도로 가격 책정하는 방법을 알아보세요.
- 캐비닛당 경첩 수량 계산 방법캐비닛당 경첩 수량이 높이 기준 규칙을 따르는 방식과 카탈로그에서 이를 설정하는 방법을 알아보세요.
- 기본 힌지 SKU가 존재한 후에만 하드웨어를 연결하십시오푸시투오픈 메커니즘과 같은 하드웨어가 연결할 기준점을 가질 수 있도록 먼저 카탈로그에 기본 힌지 SKU를 생성하십시오.
- 디자인에 캐비닛을 배치하면 수량이 자동으로 추가되도록 하드웨어를 연결합니다하드웨어 항목을 연결하면 디자인에 캐비닛을 배치할 때마다 필요한 수량이 자동으로 추가됩니다.
- 개별 SKU에 마감재와 마감 태그 연결각 SKU에 마감재를 연결하고 마감 항목 자체에 태그를 지정하여 마감재가 올바르게 인식되도록 하십시오.
- 새로 만드는 대신 기존 SKU를 복제하고 구조를 편집하세요기존 SKU를 복제하여 새 카탈로그 SKU를 만든 다음, 처음부터 만드는 대신 구조를 편집하세요.
- 카테고리, 하위 카테고리, 그룹 및 SKU의 태그 관리모든 카탈로그 레벨에 태그를 지정하면 하위 레벨이 이를 상속하며, Manage Tags 패널에서 전체 태그 세트를 업데이트할 수 있습니다.
- Add hardware 옵션을 SKU로 만들고 변형별로 표시 이미지 지정셔터 기구와 같은 Add hardware 옵션을 관리자에서 SKU로 추가하고, 각 변형에 고유한 표시 이미지를 지정하여 디자이너가 변형을 구별하고 올바른 것을 선택할 수 있게 하세요.
- 마감재, 재료 또는 라미네이트 SKU에 브랜드 지정마감재의 재료 정보를 편집하거나, 재료를 생성하거나, SKU 속성을 설정할 때 저장된 브랜드를 선택하세요.
- 카테고리, 하위 카테고리, 그룹 및 SKU를 통해 상판 재질을 선택하세요카탈로그에서 변경 캐러셀을 열고 카테고리, 하위 카테고리 및 그룹을 통해 상판 재질 SKU를 선택하세요.
- SKU 그룹을 복제하여 사이즈를 추가하고 사용하지 않는 SKU를 삭제하세요카탈로그 그룹을 복제하여 SKU 사이즈를 추가하고 더 이상 재고로 보유하지 않는 사이즈를 삭제하세요.
- SKU를 같은 그룹 또는 새 그룹으로 복제복제 대화상자를 사용하여 SKU를 자체 그룹 또는 직접 이름을 지정한 새 그룹으로 복사하십시오.
- SKU를 복제하여 소유권이 있는 편집 가능한 사본 만들기소유하지 않은 품목이나 창고 품목을 복제하면 워크스페이스가 소유하게 되어 완전히 편집할 수 있습니다.
- 같은 그룹의 소유되지 않은 SKU를 복제하여 소유된 SKU로 만드세요소유되지 않은 SKU를 같은 그룹으로 복제하여 그룹에 소유된 사본이 포함되도록 한 다음, 소유되지 않은 원본을 제거하세요.
- Clone SKU entries로 소재를 복제하고 속성을 설정하세요Clone SKU entries로 카탈로그에서 소재를 복제하고, 복제본에 고유 코드와 속성을 지정하세요.
- 목재 캐비닛 라미네이션에 'has grain' 활성화결 방향이 올바르게 처리되도록 목재 캐비닛 라미네이션에 'has grain' 옵션을 켜세요.
- 미니픽스, 더블, 힌지가 캐비닛과 어떻게 연결되는지 이해합니다미니픽스, 더블, 힌지는 캐비닛과 함께 기본으로 추가됩니다.
- 3D Model 탭에서 하드웨어 SKU에 3D 모델 업로드SKU의 3D Model 탭에서 모델 파일을 업로드하여 디자인에서 하드웨어 항목에 3D 모델을 지정하세요.
- Attach a display image or 3D model to a SKUGive a SKU its display image at creation or later, and understand the automatic model snapshot.
- Capture brand, SKU name and article number for hardwareRecord the brand name, SKU name and article number for hardware components and put screw diameter and depth in the item name so every part is identifiable in the catalogue.
- Check inherited tags and set a SKU's own tagsSee the tags a SKU inherits from its category, sub category and group, then pick and save the SKU's own tags.
- Clone a SKU to create a new hardware sizeCreate an additional hardware size by copying an existing SKU and changing its name and model number.
- Fill the bulk create template with SKU dataEnter your own item codes and the SKU names designers should see, one row per item.
- Fix an edgeband that no longer resolves after its linked SKU is deletedLearn why a design edgeband stops resolving to a valid catalogue SKU when the linked edgeband SKU is deleted from the catalogue admin.
- 디자인 제약 조건이 마감재를 자재 및 SKU에 매핑하는 방법디자인 제약 조건이 디자이너가 특정 자재에 대해 볼 수 있는 마감재를 제어하는 방법과 매핑된 카테고리 및 SKU가 정의되는 방식을 알아보세요.
- How drawer channel width comes from the purchased hardware SKULearn why the drawer channel width follows the hardware SKU you actually purchase rather than the 3D model in the design.
- How hardware rules match on panel type, thickness and cabinet typeLearn how hardware application rules are defined between two panels.
- How shutter core, edgeband and handle settings affect cabinetsLearn how a chosen shutter core, the Edgeband panel types and a handle's Shutter Height Reduction change the cabinets you place.
- How tags behave when cloning SKUs and groupsLearn which tags carry over when you clone an SKU and which you must recreate when you clone a group.
- Move a headboard from accessories to furniture for size-based pricingPlace the headboard under the furniture folder so its pricing can respond to size.
- Price glass clips per cabinet with corner or center variantsDefine the quantity rule once so glass clip pricing applies consistently across every cabinet.
- Set up grooving with a tag, SKU and manufacturing rulesCreate a grooving tag, assign it to the relevant items with multi-select, then link the SKU and manufacturing rules.
다른 가이드 14
모두 보기 (14)
- 뒷판 홈파기 기본값 구성 방법기본 뒷판 홈파기 값과 이를 고객사 표준에 따라 변경하는 방법, 그리고 admin portal 기본값이 카탈로그의 모든 캐비닛에 적용되는 방식을 알아보세요.
- 어떤 탠덤 서랍 패널이 재단 목록에 포함되는지 알아보기재단 목록에 포함되는 탠덤 서랍 패널과 이미 캐비닛에 배치된 서랍 세트를 다시 맞춤 설정하는 방법을 알아보세요.
- 검색 및 일괄 작업으로 복사된 카탈로그 항목 일괄 삭제검색으로 복사된 카탈로그 항목을 분리하여 함께 제거한 다음, 캐비닛의 중복 유닛을 정리하십시오.
- Insert 메뉴 카탈로그에서 주방 유닛 추가Insert 메뉴 카탈로그에서 도어 유닛, 서랍 유닛, 풀아웃, 싱크 유닛, 코너 유닛, 가전 유닛을 추가하고, 코너 유닛을 여러 개 배치한 뒤 배치 후 크기를 설정할 수 있습니다.
- 기존 유닛에 업데이트된 구성 방식을 적용합니다유닛을 선택하고 Bulk Edit SKU Structure의 Import from Styles으로 업데이트된 스타일을 불러온 다음, 변경 사항을 검토하고 확인합니다.
- 홈 가공 유형을 Sawing으로 변경하고 톱 도구 선택홈 윤곽에서 가공 유형과 톱 도구를 설정하여 트리밍이나 라우팅 대신 톱질로 프로파일 SKU의 홈을 절단합니다.
- 개별 유닛과 사용자 컴포넌트를 Catalog에 게시단일 유닛과 사용자 컴포넌트를 Catalog에 게시하세요. 최상위 사용자 요소 또는 가구만 게시할 수 있으며, 전체 디자인을 하나의 유닛으로 게시할 수는 없습니다.
- Create multiple shutter configurations per shutter systemCreate any number of shutter configurations under a shutter system, such as a single-swing and a flap-down configuration, then select the required one on the cabinet.
- Enter and exit bulk-selection mode on the catalog pageTick SKUs to enter bulk-selection mode, use the category and subcategory select-all checkboxes, and leave the mode with Escape or the back-caret.
- Find Catalogue on the admin portal left-side menuLocate the Catalogue option on the admin portal's left-side menu to manage items such as furniture.
- 가공 유형을 실제 작업에 맞추기SKU에 가공 유형을 설정하여 실제 수행된 작업을 반영하세요.
- Structure composite units in the catalogueStructure composite units such as cabinets with back panels, shutters and hardware in the catalogue.
- Understand how end panels are coded and shown in drawingsLearn that end panels do not carry a separate code from the cabinet they belong to.
- What the catalogue storesLearn which model furniture, props, accessories and shutter designs the catalogue holds.