ફર્નિચર કેટલોગ
માર્ગદર્શિકાઓ: 158
- કેટલોગમાં પ્રોપર્ટીઝ, બ્રાન્ડ અને ફિનિશ સાથે નવું SKU ઉમેરોકેટલોગ SKU બનાવો, તેની કન્સ્ટ્રક્શન, મટીરિયલ, હાર્ડવેર, એક્સેસરીઝ, સ્કર્ટિંગ અને ફિનિશ પ્રોપર્ટીઝ ભરો, તેની ટોપ-વ્યૂ ઇમેજ અને બ્રાન્ડ સેટ કરો, અને તેની ફિનિશ વિગતો નક્કી કરો.
- એક એક કરીને સંપાદિત કરવાને બદલે SKU ને બલ્કમાં સંપાદિત કરોદરેક SKU ને અલગથી સંપાદિત કરવાને બદલે બલ્ક સંપાદન કાર્ય વડે ઘણા SKU એકસાથે અપડેટ કરો.
- સબ્સ્ક્રાઇબ કરેલી ચેનલમાંથી SKU તમારા કેટલોગમાં ખેંચોચેનલ જાહેરમાં શેર થઈ ગયા પછી અને તમારું સબ્સ્ક્રિપ્શન મંજૂર થયા પછી, સબ્સ્ક્રાઇબ કરેલી સેલ્સ ચેનલમાંથી SKU તમારા પોતાના ઓર્ગ અથવા બિઝનેસ યુનિટમાં ઉમેરો.
- કિંમત વિભાગમાંથી SKUની વેચાણ કિંમત બદલોએક સમયે એક SKU સંપાદિત કરવાને બદલે બલ્ક-એડિટ CSV પ્રવાહ દ્વારા ઘણા SKU પર એક જ કિંમત ફેરફાર એકસાથે લાગુ કરો.
- ડાબી પેનલમાંથી કેબિનેટની સામગ્રી અને ફિનિશ બદલોSelect a unit પસંદ કરો અને ડાબી પેનલમાંથી તેની સામગ્રી બદલો; ગ્રાહકના રંગ સાથે મેળ થાય ત્યાં સુધી જરૂર પડે તેટલી વાર ફરી પસંદ કરો.
- કોર્નર યુનિટ માટે અલગ બાંધકામ શૈલી બનાવોકોર્નર યુનિટને તેમની પોતાની બાંધકામ શૈલી આપો જેથી તે તમારી સામાન્ય કેબિનેટ શૈલીઓની સાથે રહે.
- કેબિનેટ પર પ્રોફાઇલ શટર સિસ્ટમ સેટ કરોકેબિનેટ શટર કન્ફિગરેશન ખોલો, શટર સિસ્ટમ પર જાઓ અને એક સેટ કરવા માટે શટર સિસ્ટમ કન્ફિગરેશન ઉમેરો.
- કદ-આધારિત ભાવ અને જથ્થા લોજિક સાથે હાર્ડવેર SKU સેટ કરોદરેક હાર્ડવેર આઇટમને તેના કદ અને કદ દીઠ ભાવ સાથે વ્યાખ્યાયિત કરો, પછી લંબાઈ-આધારિત અથવા પ્રતિ-કેબિનેટ જથ્થા લોજિક પસંદ કરો અને વેરહાઉસમાંથી હિન્જેસ ઉમેરો.
- પરિમાણો અને સ્થાન નક્કી કરવા માટે SKU ને બલ્ક એડિટ કરોએક કેટેગરી માટે બલ્ક એડિટ ખોલીને અને તેમના પરિમાણો અને સ્થાન એડિટ કરીને એકસાથે ઘણા SKU અપડેટ કરો.
- CSV દ્વારા હાર્ડવેર SKU અને સેલ્સ ચેનલનું બલ્ક એડિટ કરોવેરહાઉસમાંથી હાર્ડવેર ફિલ્ટર કરીને ઉમેરો, પછી CSV ડાઉનલોડનો ઉપયોગ કરીને વ્યક્તિગત SKU, સેલ્સ ચેનલ, કિંમત, માર્જિન અને ટેક્સનું બલ્ક એડિટ કરો.
- કેબિનેટની સામગ્રી અને હેન્ડલ બદલો, કેબિનેટની નકલ કર્યા વિનાતમારી પાસે પહેલેથી હાજર કેબિનેટની નકલ કરવાને બદલે તેમની સામગ્રી કે હેન્ડલ બદલો.
- તમારી સંસ્થાના અને સ્ટોરના SKU માટે કયા Edit SKU Properties ટૅબ દેખાય છે તે તપાસોતમારી સંસ્થાના પોતાના, બીજા સ્ટોરમાંથી ઉમેરાયેલા, અથવા ક્લોન કરેલા કોર મટીરિયલ માટે Edit SKU Properties કયા ટૅબ અને ફીલ્ડ બતાવે છે તે જુઓ.
- વોર્ડરોબ લેવલ કન્સ્ટ્રક્શનમાંથી ડિઝાઇન કરેલ યુનિટને એડમિન કેટલોગમાં પ્રકાશિત કરોવોર્ડરોબ લેવલ કન્સ્ટ્રક્શનમાંથી એડમિનને પ્રકાશિત કરીને તમે ડિઝાઇન કરેલ યુનિટને કેટલોગમાં સાચવો.
- OBJ ફોર્મેટમાં કસ્ટમ વોર્ડરોબ શટર ડિઝાઇન અપલોડ કરોતમારી પોતાની વોર્ડરોબ શટર ડિઝાઇન OBJ ફાઇલો તરીકે પ્લેટફોર્મ પર અપલોડ કરો.
- હાર્ડવેર SKUનું પ્રાઇસિંગ યુનિટ બદલોહાર્ડવેર SKUને તેના ડિફોલ્ટ પ્રાઇસિંગ યુનિટથી કસ્ટમ યુનિટમાં બદલો, જેથી આઇટમની ગણતરી તમે પ્રાઇસ કરો તે રીતે થાય.
- એડમિન કેટલોગમાં ફર્નિચર કેવી રીતે ગોઠવાયેલું છેએડમિન કેટલોગના ફર્નિચર વિભાગમાં મોડ્યુલર અને નોન-મોડ્યુલર ફર્નિચર કેવી રીતે રહે છે તે જુઓ, જેમાં મોડ્યુલર વસ્તુઓ શ્રેણીઓમાં ગોઠવાયેલી હોય છે અને તેમની નીચે અલગ યુનિટ ઉમેરાય છે.
- SKU properties દ્વારા SKU ને કોર મટીરિયલ સાથે લિંક કરોSKU ને કોર મટીરિયલ સાથે લિંક કરો જેથી તેમના પર મટીરિયલ એસોસિએશન લાગુ થાય.
- SKUનું કોડ કે આર્ટિકલ નંબર બદલ્યા વિના તેનું નામ બદલોSKUની પ્રોપર્ટીઝ સંપાદિત કરીને અને સાચવીને તેનું નામ ગમે ત્યારે બદલો; SKUનો કોડ અને આર્ટિકલ નંબર એ જ રહે છે.
- સામગ્રીની માહિતી સાથે નવું એજ બેન્ડ SKU ઉમેરોHardware > Edge Bands માં Thickness, Tape Width અને ફરજિયાત Material Info ભરીને નવું એજ બેન્ડ SKU ઉમેરો.
- Bulk edit wardrobe SKU structure to apply construction changesApply a construction change across many wardrobe SKUs at once instead of editing each unit individually.
- કેટલોગ SKU ને સંપાદિત કરતા પહેલાં SKU માલિકી તપાસોLearn why a SKU can only be edited when it is owned by the account and where the catalogue shows ownership.
- ડુપ્લિકેટ SKU કાઢી નાખો અને આખા SKU જૂથને એકસાથે બલ્ક ક્લોન કરોએક કોડ હેઠળના ડુપ્લિકેટ SKU દૂર કરો અને બધા SKU ના આખા જૂથને એક જ વારમાં ક્લોન કરો.
- ક્લોન કરેલા SKUનું નામ અને પરિમાણો સંપાદિત કરોક્લોન કર્યા પછી, નવા SKUનું નામ અને પરિમાણો અપડેટ કરો જેથી ડિઝાઇનર્સ design portal માં વિકલ્પ જોઈ શકે.
- કેબિનેટ અથવા વોરડ્રોબને કેટલોગમાં પ્રકાશિત કરોએક વ્યક્તિગત યુનિટને તેના બાંધકામમાંથી વિભાગ, પેટા-શ્રેણી અને શ્રેણી જૂથમાં પ્રકાશિત કરો.
- SKU properties માં shutter design થી shutter નો ભાવ સેટ કરોSKU properties માં shutter design થી દર સેટ કરીને shutter નો ભાવ નક્કી કરો, અને જુદા જુદા ભાવવાળા વેરિઅન્ટને અલગ SKU માં વિભાજિત કરો.
- કનેક્ટર્સ હેઠળ હાર્ડવેર કેટલોગમાં સ્ક્રૂ SKU ઉમેરોકનેક્ટર્સ હેઠળ હાર્ડવેર કેટલોગમાં સ્ક્રૂ SKU બનાવો, પછી વધુ સાઇઝ ઉમેરવા માટે તેને નવા જૂથમાં ક્લોન કરો.
- SKU, જૂથો અને આખી શ્રેણીઓને એકસાથે ડિલીટ કરોSKU, જૂથો અથવા આખી શ્રેણી પસંદ કરો અને More મેનુની Delete selected SKUs ક્રિયા દ્વારા તેમને દૂર કરો.
- એજ બેન્ડ SKU ને ક્લોન કરો અથવા ટેક્સચર સાથે નવા ઉમેરોહાલના એજ બેન્ડ SKU ને ક્લોન કરીને અને તેમાં ફેરફાર કરીને નવો એજ બેન્ડ વેરિઅન્ટ બનાવો, અથવા નિર્દિષ્ટ માપ અને ડાઉનલોડ કરેલા ટેક્સચર સાથે નવો એજ બેન્ડ ઉમેરો.
- Machining Type દ્વારા એક્સેસરી SKU પર મશીનિંગ ટૂલ્સ ગોઠવોMachining Type પસંદ કરીને અને SKU પર મશીન અને ટૂલ સાચવીને એક્સેસરી SKU સાથે યોગ્ય CNC ટૂલ જોડો.
- કેબિનેટ અને વોર્ડરોબ માટે શટર સિસ્ટમ બનાવોકેટલોગમાં કેબિનેટ અથવા વોર્ડરોબ માટે શટર સિસ્ટમ બનાવો.
- રંગ-પસંદગીની ગૂંચ ટાળવા માટે દરેક રંગ માટે અલગ SKU બનાવોદરેક રંગને તેનું પોતાનું SKU આપો, જેથી ડિઝાઇનરોએ રંગનું પગલું છોડવાને બદલે ફક્ત યોગ્ય SKU પસંદ કરવું પડે.
- બલ્ક-એડિટ ફાઇલ દ્વારા અથવા SKU પર કેટલોગ SKU ના ભાવ દાખલ કરોબલ્ક-એડિટ પ્રાઇસિંગ ફાઇલ ડાઉનલોડ કરીને, ભરીને અને અપલોડ કરીને અથવા વ્યક્તિગત SKU પર સીધો ભાવ સંપાદિત કરીને કેટલોગ SKU માટે ભાવ દાખલ કરો.
- design portal માંથી SKU કેશને ફરજિયાત રિફ્રેશ કરોdesign portal પર રિફ્રેશ ક્રિયા ચલાવો, જે ડિઝાઇનમાં એડમિન કેટલોગ ફેરફારો મોકલવા માટેનું પસંદગીનું સ્થળ છે.
- કમ્પોઝિટ SKU કેવી રીતે ઘણા કેબિનેટ એકસાથે મૂકે છેકમ્પોઝિટ SKU તમને એક જ SKUમાં ઘણા કેબિનેટ મૂકવાની મંજૂરી આપે છે જેથી બધા યુનિટ તેમની નિશ્ચિત ગોઠવણીમાં એકસાથે આવે.
- કેબિનેટ પ્રકાર માટે કઈ શટર સિસ્ટમ દેખાય તે મર્યાદિત કરોકેબિનેટ શટર સિસ્ટમ કન્ફિગરેશન પર નિયમ બનાવો, જેથી ડિઝાઇનરને ફક્ત તે જ શટર સિસ્ટમ દેખાય જે તેઓ પસંદ કરેલા કેબિનેટ કે વોરડ્રોબ પ્રકારને લાગુ પડે.
- એડિટ પ્રોપર્ટીઝ દ્વારા SKU ને હાર્ડવેર સાથે લિંક કરોએક એસેસરી SKU ને હાર્ડવેર આઇટમ સાથે જોડો જેથી તે SKU તે હાર્ડવેર સાથે દેખાય.
- કેટલોગમાંથી રસોડાના અને વોર્ડરોબના આઇટમ મૂકોકેટલોગમાંથી રસોડાનું ફર્નિચર પસંદ કરીને મૂકો, પછી એ જ રીતે વોર્ડરોબના આંતરિક ભાગો અને ડ્રોઅર ઉમેરો.
- હાર્ડવેર સાથે કેબિનેટ કન્સ્ટ્રક્શન કેટલોગમાં પ્રકાશિત કરોકેબિનેટ કન્સ્ટ્રક્શન પ્રકાશિત કરો જેથી તે ફરી વાપરી શકાય અને તેનું શટર મિકેનિઝમ હાર્ડવેર આપોઆપ સાથે આવે.
- SKU properties દ્વારા J અને C gola cut-out ને Pocketing પર સેટ કરોJ અને C gola cut-out માટે machining type ને Pocketing પર સેટ કરો અને યોગ્ય tool પસંદ કરો જેથી cut-out યોગ્ય રીતે machined થાય.
- SKU ઉમેરો અને તેના પરિમાણ અને જાડાઈ સેટ કરોડિફોલ્ટ ઊંચાઈ, પહોળાઈ અને ઊંડાઈ સાથે કેટલોગ આઇટમ બનાવો, પછી સ્ટ્રક્ચર એડિટર ખોલ્યા વિના તેનું માપ અને જાડાઈ ગોઠવો.
- એક SKU ઉમેરો અને તેના ફરજિયાત ફીલ્ડ ભરોગ્રુપના plus બટનથી એક SKU બનાવો અને Add SKU ફોર્મ લાગુ કરે તેવી ચકાસણીઓ પૂરી કરો.
- બલ્ક એડિટ SKU: પૂર્વદર્શન, વ્યક્તિગત vs સામાન્ય મોડ, અને ડિલીટ કરેલા SKUતમે કન્ફર્મ અને પબ્લિશ કરો તે પહેલાં Bulk Edit વિઝાર્ડનું વ્યક્તિગત-SKU ગ્રિડ અને સામાન્ય 'Editing All SKUs at Once' મોડ ઘણા SKU કેવી રીતે બદલે છે તે જાણો.
- પસંદ કરેલા કેબિનેટ પર બલ્ક-એપ્લાય કન્સ્ટ્રક્શન સ્ટાઇલએડમિનમાં કેબિનેટ પસંદ કરીને Bulk Actions વાપરીને એક જ સમયે ઘણા કેબિનેટ પર એક કન્સ્ટ્રક્શન સ્ટાઇલ લાગુ કરો.
- કેબિનેટ પ્રોફાઇલ માટે પ્રમાણભૂત SKU બનાવોadmin portal માં ચોક્કસ પ્રોફાઇલ સાથે એક SKU બનાવો જેથી ડિઝાઇન તેનો ઉપયોગ કરી શકે.
- Create leveler connector SKUs in admin portal for drag-and-drop useCreate cards for the relevant ranges so leveler connector SKUs are available for drag-and-drop use.
- સામગ્રીની પ્રીલેમ અને પોસ્ટલેમ આવૃત્તિઓ માટે અલગ SKU બનાવોએક જ કોર મટીરિયલની પ્રી-લેમિનેટેડ અને પોસ્ટ-લેમિનેટેડ આવૃત્તિઓને પોતાના અલગ SKU આપો જેથી ફિનિશ યાદીઓ અલગ રહે.
- SKU ના વધારાના ગુણધર્મો સંપાદિત કરોSKU પરના મુક્ત-સ્વરૂપ કી/વેલ્યુ ગુણધર્મોની સમીક્ષા કરો અને બદલો, અને અન્ય લોકો તેને ક્લોન કરી શકે કે નહીં તે નિયંત્રિત કરો.
- 3D મોડેલ ધરાવતું SKU મેળવોવેરહાઉસમાંથી મોડેલ કરેલું SKU ઉમેરો અથવા ચોક્કસ પ્રોડક્ટ ઉપલબ્ધ ન હોય તો સમાન SKU ક્લોન કરો.
- બાળ/ઘટક SKU ના ભાવ વેચાણ ચેનલોમાં કેવી રીતે નક્કી થાય છેતમારા સંદર્ભમાં બાળ કે ઘટક SKU કયો ભાવ લે છે તે નક્કી કરતી વારસાઈ શ્રેણીને અનુસરો.
- Move SKUs and groups across the catalogue treeRelocate a SKU or a whole group to an existing group using the move options in their menus.
- SKU ઉમેરતી વખતે તેને નામ આપો અને પછી તેનું નામ બદલોadmin portal માં SKU ઉમેરતી વખતે ફરજિયાત નામ દાખલ કરો, પછી SKU ની વિગતો સંપાદિત કરીને તે નામ પછીથી બદલો.
- બલ્ક SKU-સ્ટ્રક્ચર એડિટર ખોલો અને સ્ટ્રક્ચર મૂલ્યો સેટ કરોકેટલોગ બલ્ક-એક્શન્સ મેનૂમાંથી એડિટર સુધી પહોંચો અને ડાબી ઘટાડો, જમણી શટર ગેપ, બેઝ યુનિટ ઊંડાઈ અને બેક પેનલ વિકલ્પો જેવા મૂલ્યો સેટ કરો.
- SKU ને મટીરિયલ અને યુનિટ પ્રકાર પ્રમાણે ઉપશ્રેણીઓમાં ગોઠવોSKU ને ઉપશ્રેણીઓમાં જૂથબદ્ધ કરો જેથી ડિઝાઇનરો યોગ્ય સેટમાંથી પસંદ કરી શકે અને મૂકી શકે, તેમને યુનિટ પ્રકાર અને મટીરિયલ પ્રમાણે અલગ પાડો.
- SKU ને સેલ્સ ચેનલ પર પ્રકાશિત કરો અને સાયલન્ટ ફિલ્ટરિંગ સમજોચેનલ પર SKU પ્રકાશિત કરતી વખતે ઇન્વેન્ટરીમાં ન હોય તેવા SKU સાયલન્ટ રીતે કેમ છોડી દેવાય છે અને ડુપ્લિકેટ કેમ છોડી દેવાય છે, અને દૂર કરવાનું વર્તન કેવી રીતે અલગ છે તે જાણો.
- Replace a copied leg SKU via manufacturing settingsReplace the SKU of a leg that comes from the connector folder but is not part of the catalogue by editing its connector in manufacturing settings.
- કેબિનેટના માપને નિશ્ચિત માપ અથવા ન્યૂનતમ-મહત્તમ શ્રેણી સાથે મર્યાદિત કરોદરેક કેબિનેટને નિશ્ચિત માપ અથવા ન્યૂનતમ અને મહત્તમ માપની શ્રેણી સાથે ગોઠવો જેથી ડિઝાઇનર ફક્ત તે મર્યાદાઓની અંદરના માપ પસંદ કરી શકે.
- SKU કસ્ટમાઇઝેશન મેન્યુઅલી સાચવો અને થંબનેલ સેટ કરોsave પર ક્લિક કરીને તમારા SKU કસ્ટમાઇઝેશન સાચવો, અને તે સમયે વર્તમાન વ્યૂને SKU થંબનેલ તરીકે સેટ કરો.
- ફિનિશ SKUની મટીરિયલ, લિંક કરેલી એજબેન્ડ અને બલ્ક ઇમેજ અપલોડ સેટ કરોફિનિશ SKUની મટીરિયલ પ્રિવ્યૂ, ટેક્સચર, રેપિંગ અને ટેમ્પલેટ ગોઠવો, તેને સાચવો, એજબેન્ડ લિંક કરો અને ઇમેજ સાથે CSVમાંથી બલ્કમાં SKU બનાવો.
- શા માટે ડિલીટ કરેલ SKU હજી પણ પ્રાઇસિંગ અને ડિઝાઇનમાં દેખાય છે તે સમજોકેટલોગમાં હવે ન હોય તેવો SKU તમારી ડિઝાઇન કે પ્રાઇસિંગ ડેટામાં હજી કેમ દેખાઈ શકે છે તે જાણો.
- મટીરિયલ એડિટ કર્યા પછી SKU થંબનેલ્સ અપડેટ કરોકેટલોગ મટીરિયલ એડિટ કર્યા પછી કેશ રિફ્રેશ કરો, જેથી નવો રંગ અને અન્ય અપડેટ થયેલા મૂલ્યો ડિઝાઇન સુધી પહોંચે.
- admin portal માં SKU મર્યાદાઓ જુઓ અને સંપાદિત કરોઘટક માટે ન્યૂનતમ/મહત્તમ કેબિનેટ પહોળાઈ અને ઊંડાઈ નક્કી કરતી મર્યાદાઓ જોવા અને સંપાદિત કરવા admin portal ખોલો.
- SKU ક્લોનિંગ શું કોપી કરે છે અને તેના ડિફોલ્ટ નામક્લોન કરેલ SKU બરાબર શું નકલ કરે છે, કયા ડિફોલ્ટ ભરે છે અને શું ક્યારેય કોપી કરતું નથી તે જુઓ.
- Add a new SKU and clone a catalogue groupAdd a SKU from a group card's + and clone a catalogue group through its two dialogs.
- હાલના SKU-માં ન્યૂનતમ/મહત્તમ માપના નિયમો ઉમેરોહાલના SKU-માં ન્યૂનતમ અને મહત્તમ ઊંડાઈ, પહોળાઈ અને ઊંચાઈના નિયમો ઉમેરો, જેથી સિસ્ટમ મર્યાદા બહારની એન્ટ્રીઓ અટકાવે અને ડિઝાઇન ભૂલો રોકે.
- Adjust unit height from the furniture unit menuChange the height of a furniture unit directly from its furniture unit menu.
- Attach CAM and manufacturing details via a drive link on the SKUUpload a display image for a hardware SKU and link its CAM or manufacturing details from a drive in the SKU record.
- Bulk Delete: SKU અને જૂથોને કાયમ માટે ડિલીટ કરોBulk Delete પ્રક્રિયા વડે કેટલોગમાંથી બિનજરૂરી SKU અને તેમના જૂથો દૂર કરો, અને ચોક્કસ જાણો કે શું દૂર થાય છે અને શું રહે છે.
- Bulk edit SKUs across sales channels in the catalogueSelect your SKUs, choose the editing mode, tick the sales channels, then apply the change to all selected SKUs before publishing.
- Bulk edit SKUs from the Bulk actions toolbarSelect SKUs and use the Edit menu to change them in app, edit their SKU structure, or export and import a sheet.
- Change a SKU's unit via admin portal sales channel pricingChange the unit of a catalogue SKU such as edgeband without altering the overall project unit.
- Change light placement from base to ceiling in SKU propertiesStop lights from being placed on the floor by switching their placement option from base to ceiling, one SKU at a time or in bulk.
- Check presence in cabinets for a hardware cardFind out whether a hardware card is actually used in any cabinet before removing a duplicate.
- Clone SKUs in bulk into a new group and delete the originalsCopy a whole group of SKUs, or make an editable workspace-owned copy of a global profile or glass, and optionally delete the originals in the same operation.
- Create a core material SKU with code, thickness and textureAdd a core material SKU under Hardware > Core Materials with its procurement code and a texture image.
- Create a new 3D SKU by grouping and uploading an OBJ fileCreate a 3D SKU by grouping it and uploading an OBJ file, keeping in mind which catalogue categories cannot hold 3D models.
- શરૂઆતથી બાહ્ય ડ્રોઅર સ્ટેક SKU બનાવોએક ગ્રુપ ઉમેરીને અને પછી તેની SKU રચના સંપાદિત કરીને ડ્રોઅર સ્ટેક SKU બનાવો.
- Create matte and gloss variants by cloning a finish SKUClone a finish SKU and rename the copy to get matte and gloss variants, each with its own copied material and default price.
- Delete a connector that is in use by cabinetsReplace a connector in every cabinet that uses it, then delete the now-unused connector.
- શૂન્ય ભાવ ટાળવા માટે કેટલોગમાંથી અપ્રચલિત SKU કાઢી નાખોજૂના SKU કાઢી નાખો જેથી તે શૂન્ય ભાવ પર ઉકેલાવાનું બંધ કરે.
- કૅટલૉગમાંથી ન વપરાયેલા SKU કાઢી નાખો જ્યારે કોઈ આર્ટિકલ નંબર ન હોયજે SKU વપરાતું નથી, જેમ કે મેળ ખાતા આર્ટિકલ નંબર વગરનો ઊંડાઈનો પ્રકાર, તેને તેના સેટિંગ્સ મેનૂમાંથી દૂર કરો.
- Download SKUs from the warehouse into the catalogueDownload catalogue SKUs from the warehouse so they become available for use in designs.
- Edit a designer-owned SKU before it is approvedLearn who can change an unapproved designer-created SKU and how to unblock edits by other users.
- Edit internal drawer structure via admin furniture drawer setsEdit the internal drawer structure from the admin portal under furniture drawer sets.
- Finalize bulk-created SKUs from the Bulk Actions pageAdd your SKU rows on the Bulk Actions Create SKUs page, then review them and use the Bulk Actions controls to apply and publish, which finalizes the upload.
- Hover over a SKU heading to see its full nameRead a truncated SKU name in full by hovering over its heading, and confirm which SKU is open from the properties panel.
- How consumable quantity is calculated across cabinetsLearn how the system calculates consumption consistently across cabinets instead of leaving it to the designer.
- How designer-created personal SKUs workLearn how personal SKUs stay visible only to their creator until they are approved into the organisation catalogue.
- How personal designer-created SKUs stay privateLearn why SKUs a designer creates as personal items are visible only to their owner and never to admins or other designers.
- Identify a placed cabinet's catalogue name via the eye iconDisplay the furniture name so you can trace the item back to its catalogue entry and correct its dimensions there.
- Link items to a global catalogue SKU you do not ownClone a global catalogue SKU into one of your own sub-categories so you can set links on the copy.
- Model number is now compulsory when saving a catalogue SKUA model number is mandatory on a catalogue SKU.
- Move a SKU to an existing group of the same category typeMove a SKU into an existing group by picking the destination group from the SKU's settings menu, as long as both groups belong to the same category type.
- Open the Component Editor from a SKU cardOpen a SKU's structure in the Component Editor to see its SKU Type and edit it with its own Save and Reset buttons.
- Open the component editor from SKU settingsOpen SKU settings and choose 'edit SKU structure' to open the component editor and build the cabinet itself.
- Price a single SKU via SKU properties advanced pricingSet a per-unit price for one SKU in its advanced pricing, with taxes and margin applied.
- Refresh SKU cache to restore global hardware in old designsRun a refresh SKU cache on old designs so they pull in the hardware logic originally set for the account.
- Refresh design portal cache after changing linked SKU materialsSave the linked material change, then refresh the cache in the design portal settings so designs pick it up.
- કેટલોગમાં ફેરફાર કર્યા પછી SKU પસંદ કરતા પહેલાં પૃષ્ઠ ફરીથી લોડ કરોકેટલોગમાં ફેરફાર કર્યા પછી, પૃષ્ઠ ફરીથી લોડ કરો, પછી કેબિનેટ કેટલોગ પર જાઓ અને સંબંધિત SKU, જેમ કે બેઝ યુનિટ, ડ્રોઅર યુનિટ અને પુલ-આઉટ યુનિટ, ની બાજુમાં આવેલા ચેકબોક્સ પર ટિક કરો.
- ત્રણ-બિંદુ મેનુ દ્વારા બધા કેબિનેટમાં કેટલોગ કનેક્ટર બદલોકનેક્ટર જ્યાં જ્યાં વપરાય છે ત્યાં તેને બદલો અને જૂના કનેક્ટરનું શું થાય તે જાણો.
- Review, confirm and publish bulk SKU-structure changesFilter to the fields you changed, review them, then confirm and publish so the edits are applied to all selected SKUs.
- Set an SKU to take its price from constituentsChoose whether a catalogue SKU takes its price from a fixed CPU value or from its constituent materials.
- Understand catalogue image support for SKUsLearn that the catalogue only supports static SKU images uploaded in the admin catalogue.
- Use RSU to inspect the SKU behind a design componentFind out which SKU a design component actually uses by reading its details in RSU.
- Use dedicated corner units for corner cabinetsUse the catalogue's dedicated corner units when a cabinet sits in a corner instead of relying only on standard base units.
- ડિઝાઇનરે બનાવેલ SKU કેટલોગમાં કેમ નથીડિઝાઇનર તરીકે તમે બનાવેલ SKU ત્યાં સુધી ખાનગી રહે છે જ્યાં સુધી Catalog Manager તેને મંજૂર ન કરે, તેથી મંજૂરી શું બદલે છે તે અહીં છે.
- બધા પસંદ કરો અને બલ્ક ક્રિયાઓ દ્વારા એકસાથે ઘણા SKU એકસાથે સંપાદિત કરોસૂચિમાંના દરેક SKU પસંદ કરો અને Bulk Actions દ્વારા તેમને એકસાથે સંપાદિત કરો.
- SKU સાથે મેળ ખાય તે માટે કેટલોગ આઇટમ્સને ક્લોન કરો અને બલ્ક એડિટ કરોઅસ્તિત્વમાં રહેલી કેટલોગ આઇટમ્સને ક્લોન કરો અને તેમના સાઇઝ અને નામ બલ્ક એડિટ કરો, જેથી તે ચોક્કસ SKU સાથે મેળ ખાય.
- કેબિનેટ અને વોર્ડરોબ માટે ડિફોલ્ટ કાર્કસ અને શટર મટીરિયલ પસંદગીઓ સેટ કરોડિફોલ્ટ કાર્કસ અને શટર મટીરિયલ પસંદગીઓ સાચવો જેથી દરેક નવા પ્રોજેક્ટમાં કિચન અને વોર્ડરોબ કેબિનેટ તેની સાથે શરૂ થાય.
- Add hardware અને એસકેયુ સ્તરે એસેસરી પ્રાઇસિંગAdvanced Pricing માં સેલ્સ ચેનલ હેઠળ ઉમેરીને એસકેયુ પર હાર્ડવેર અને એસેસરીનો ભાવ નક્કી કરો.
- ઘણા બધા SKU-માં વધારાના ગુણધર્મોને એકસાથે સંપાદિત કરોએકસાથે ઘણા SKU-ના વધારાના ગુણધર્મો અને ઉત્પાદન વિગતો બદલો અને પછી ડિઝાઇન રિફ્રેશ કરો.
- Linked SKUs દ્વારા એજ બેન્ડને હાર્ડવેર SKU સાથે લિંક કરોબંને તમારા કેટલોગમાં જોડાયેલા રહે તે માટે Linked SKUs વિભાગ દ્વારા એજ બેન્ડને હાર્ડવેર SKU સાથે જોડો.
- CSV દ્વારા કસ્ટમ મટીરિયલ્સ ઉમેરો અને SKU તથા કાચા માલના ભાવ દાખલ કરોતમારી પોતાની પ્લાય જાડાઈ અને મટીરિયલ્સ તેમના પોતાના ખર્ચ સાથે ઉમેરો, અને કાચા માલ માટે ખરીદ કિંમત, કર ટકાવારી અને ઇચ્છિત માર્જિન દાખલ કરો જેથી વેચાણ કિંમત ગણવામાં આવે.
- સ્ટોર SKU વગરના ઓટો-ક્રિએટેડ પેનલ માટે હેન્ડલસ્ટોર SKU વગરના ઓટો-ક્રિએટેડ પેનલ શું છે અને તેમને અલગથી કિંમત કેવી રીતે આપવી તે જાણો.
- કેબિનેટ દીઠ હિન્જની સંખ્યા કેવી રીતે ગણવામાં આવે છેકેબિનેટ દીઠ હિન્જની સંખ્યા ઊંચાઈ-આધારિત નિયમને કેવી રીતે અનુસરે છે અને કેટલોગમાં તેને કેવી રીતે ગોઠવવું તે જાણો.
- બેઝ હિન્જ SKU અસ્તિત્વમાં આવે તે પછી જ હાર્ડવેર લિંક કરોપહેલા કેટલોગમાં બેઝ હિન્જ SKU બનાવો, જેથી પુશ-ટુ-ઓપન મિકેનિઝમ જેવા હાર્ડવેરને લિંક કરવા માટે સંદર્ભ બિંદુ મળે.
- હાર્ડવેરને લિંક કરો જેથી ડિઝાઇનમાં કેબિનેટ સાથે જથ્થો આપમેળે ઉમેરાયહાર્ડવેર આઇટમ્સને લિંક કરો જેથી ડિઝાઇનમાં કેબિનેટ મૂકતાં જ જરૂરી જથ્થો આપમેળે ઉમેરાય.
- વ્યક્તિગત SKU-ઓમાં ફિનિશ અને ફિનિશ ટૅગ્સ જોડોદરેક SKUમાં ફિનિશ જોડો અને ફિનિશ એન્ટ્રી પર જ ટૅગ લગાવો, જેથી ફિનિશ યોગ્ય રીતે ઓળખાય.
- નવું બનાવવાને બદલે હાલનું SKU ક્લોન કરો અને તેનું સ્ટ્રક્ચર એડિટ કરોહાલના SKUને ક્લોન કરીને નવું કેટલોગ SKU બનાવો, પછી શરૂઆતથી બનાવવાને બદલે તેનું સ્ટ્રક્ચર એડિટ કરો.
- શ્રેણીઓ, ઉપશ્રેણીઓ, જૂથો અને SKU પર ટૅગ્સ મેનેજ કરોકોઈપણ કૅટલોગ સ્તરે ટૅગ્સ જોડો જેથી નીચલા સ્તરો તેમને વારસામાં મેળવે, અને Manage Tags પેનલમાંથી સંપૂર્ણ ટૅગ સેટ અપડેટ કરો.
- Add hardware વિકલ્પો SKU તરીકે, દરેક વેરિઅન્ટ માટે એક ડિસ્પ્લે ઇમેજ સાથેએડમિનમાં શટર મિકેનિઝમ જેવા Add hardware વિકલ્પો SKU તરીકે ઉમેરો અને દરેક વેરિઅન્ટને તેની પોતાની ડિસ્પ્લે ઇમેજ આપો, જેથી ડિઝાઇનર્સ તેમને અલગ પાડી શકે અને યોગ્ય વેરિઅન્ટ પસંદ કરી શકે.
- ફિનિશ, મટીરિયલ અથવા લેમિનેટ SKU ને બ્રાન્ડ સોંપોફિનિશની મટીરિયલ માહિતી સંપાદિત કરતી વખતે, મટીરિયલ બનાવતી વખતે અથવા SKU ગુણધર્મો સેટ કરતી વખતે સાચવેલી બ્રાન્ડ પસંદ કરો.
- કેટેગરી, સબકેટેગરી, ગ્રુપ અને SKU દ્વારા કાઉન્ટરટોપ મટીરિયલ પસંદ કરોchange-from-catalog કેરોસેલ ખોલો અને તેની કેટેગરી, સબકેટેગરી અને ગ્રુપ દ્વારા કાઉન્ટરટોપ મટીરિયલ SKU પસંદ કરો.
- સાઇઝ ઉમેરવા અને ન વપરાતા SKU દૂર કરવા માટે SKU જૂથનું ક્લોન બનાવોSKU સાઇઝ ઉમેરવા અને હવે સ્ટોકમાં ન રાખેલી સાઇઝ દૂર કરવા માટે કેટલોગ જૂથનું ક્લોન બનાવો.
- SKU ને એ જ જૂથમાં અથવા નવા જૂથમાં ક્લોન કરોSKU ને તેના જ જૂથમાં અથવા તમે નામ આપો તે નવા જૂથમાં કોપી કરવા માટે ક્લોન સંવાદનો ઉપયોગ કરો.
- ઑન્ડ, સંપાદનયોગ્ય નકલ મેળવવા માટે SKU નું ક્લોન કરોઑન્ડ ન હોય તેવી અથવા વેરહાઉસ આઇટમનું ક્લોન કરો જેથી તે તમારા વર્કસ્પેસની માલિકીની બને અને સંપૂર્ણ સંપાદનયોગ્ય થાય.
- એક જ જૂથમાં રહેલા માલિકી વગરના SKUનું ક્લોન કરીને તેને માલિકીવાળું બનાવોમાલિકી વગરના SKUનું એ જ જૂથમાં ક્લોન કરો જેથી જૂથમાં માલિકીવાળી નકલ રહે, પછી માલિકી વગરની મૂળ નકલ દૂર કરો.
- Clone SKU entries વડે મટીરિયલની નકલ બનાવો અને તેના પ્રોપર્ટીઝ સેટ કરોClone SKU entries વડે કેટલોગમાંથી મટીરિયલની નકલ બનાવો અને નકલને તેનો પોતાનો કોડ અને પ્રોપર્ટીઝ આપો.
- લાકડાના કેબિનેટ લેમિનેશન માટે 'has grain' સક્ષમ કરોલાકડાના કેબિનેટ લેમિનેશન માટે 'has grain' વિકલ્પ ચાલુ કરો જેથી દાણાની દિશા યોગ્ય રીતે સંભાળી શકાય.
- Understand how mini-fixes, doubles and hinges link to cabinetsMini-fixes, doubles and hinges are added by default with cabinets.
- 3D Model ટૅબ દ્વારા હાર્ડવેર SKU પર 3D મૉડલ અપલોડ કરોSKU ના 3D Model ટૅબ પર મૉડલ ફાઇલ અપલોડ કરીને ડિઝાઇનમાં હાર્ડવેર આઇટમને 3D મૉડલ આપો.
- Attach a display image or 3D model to a SKUGive a SKU its display image at creation or later, and understand the automatic model snapshot.
- Capture brand, SKU name and article number for hardwareRecord the brand name, SKU name and article number for hardware components and put screw diameter and depth in the item name so every part is identifiable in the catalogue.
- Check inherited tags and set a SKU's own tagsSee the tags a SKU inherits from its category, sub category and group, then pick and save the SKU's own tags.
- Clone a SKU to create a new hardware sizeCreate an additional hardware size by copying an existing SKU and changing its name and model number.
- Fill the bulk create template with SKU dataEnter your own item codes and the SKU names designers should see, one row per item.
- Fix an edgeband that no longer resolves after its linked SKU is deletedLearn why a design edgeband stops resolving to a valid catalogue SKU when the linked edgeband SKU is deleted from the catalogue admin.
- ડિઝાઇન કન્સ્ટ્રેન્ટ્સ ફિનિશને મટીરિયલ અને SKU સાથે કેવી રીતે મેપ કરે છેડિઝાઇન કન્સ્ટ્રેન્ટ્સ કેવી રીતે નિયંત્રિત કરે છે કે ડિઝાઇનર મટીરિયલ માટે કઈ ફિનિશ જોઈ શકે છે અને મેપ કરેલી કેટેગરીઓ અને SKU કેવી રીતે વ્યાખ્યાયિત થાય છે તે જાણો.
- How drawer channel width comes from the purchased hardware SKULearn why the drawer channel width follows the hardware SKU you actually purchase rather than the 3D model in the design.
- How hardware rules match on panel type, thickness and cabinet typeLearn how hardware application rules are defined between two panels.
- How shutter core, edgeband and handle settings affect cabinetsLearn how a chosen shutter core, the Edgeband panel types and a handle's Shutter Height Reduction change the cabinets you place.
- How tags behave when cloning SKUs and groupsLearn which tags carry over when you clone an SKU and which you must recreate when you clone a group.
- Move a headboard from accessories to furniture for size-based pricingPlace the headboard under the furniture folder so its pricing can respond to size.
- Price glass clips per cabinet with corner or center variantsDefine the quantity rule once so glass clip pricing applies consistently across every cabinet.
- Set up grooving with a tag, SKU and manufacturing rulesCreate a grooving tag, assign it to the relevant items with multi-select, then link the SKU and manufacturing rules.
વધુ માર્ગદર્શિકાઓ 14
બધું બતાવો (14)
- બેક પેનલ ગ્રૂવિંગના ડિફોલ્ટ કેવી રીતે ગોઠવાય છેLearn the default back panel grooving value, how it can be changed per client standard, and how admin portal defaults apply to all cabinets in the catalogue.
- Understand which tandem drawer panels go to the cut listLearn which tandem drawer panels are included in the cut list and how to re-customize a drawer set already placed in a cabinet.
- શોધ અને Bulk actions દ્વારા નકલ કરેલી કેટલોગ આઇટમ્સને એકસાથે ડિલીટ કરોશોધ વડે નકલ કરેલી કેટલોગ એન્ટ્રીઓને અલગ કરો અને તેમને એકસાથે દૂર કરો, પછી કેબિનેટમાં ડુપ્લિકેટ યુનિટ સાફ કરો.
- Insert મેનુ કેટલોગમાંથી કિચન યુનિટ ઉમેરોInsert મેનુ કેટલોગમાંથી શટર યુનિટ, ડ્રોઅર યુનિટ, પુલ-આઉટ, સિંક યુનિટ, કોર્નર યુનિટ અને એપ્લાયન્સ યુનિટ ઉમેરો, અનેક કોર્નર યુનિટ મૂકો અને મૂક્યા પછી તેમના માપ સેટ કરો.
- અપડેટ કરેલી બાંધણી શૈલી હાલના યુનિટ્સ પર લાગુ કરોયુનિટ્સ પસંદ કરો, Bulk Edit SKU Structure માં Import from Styles વડે અપડેટ કરેલી શૈલી લાવો, પછી ફેરફારો તપાસો અને પુષ્ટિ કરો.
- ગ્રૂવ મશીનિંગ પ્રકારને Sawing માં બદલો અને સો ટૂલ પસંદ કરોગ્રૂવ કોન્ટૂર પર મશીનિંગ પ્રકાર અને સો ટૂલ સેટ કરીને ટ્રિમિંગ કે રાઉટિંગને બદલે સોિંગ દ્વારા પ્રોફાઇલ SKU નો ગ્રૂવ કાપો.
- વ્યક્તિગત યુનિટ અને વપરાશકર્તા ઘટકોને Catalog પર પ્રકાશિત કરોએકલ યુનિટ અને વપરાશકર્તા ઘટકોને Catalog પર પ્રકાશિત કરો, ધ્યાનમાં રાખો કે ફક્ત સૌથી ઉપરનું વપરાશકર્તા એલિમેન્ટ અથવા ફર્નિચર જ પ્રકાશિત કરી શકાય છે અને આખી ડિઝાઇનને એક યુનિટ તરીકે પ્રકાશિત કરી શકાતી નથી.
- Create multiple shutter configurations per shutter systemCreate any number of shutter configurations under a shutter system, such as a single-swing and a flap-down configuration, then select the required one on the cabinet.
- Enter and exit bulk-selection mode on the catalog pageTick SKUs to enter bulk-selection mode, use the category and subcategory select-all checkboxes, and leave the mode with Escape or the back-caret.
- Find Catalogue on the admin portal left-side menuLocate the Catalogue option on the admin portal's left-side menu to manage items such as furniture.
- મશીનિંગ પ્રકારને વાસ્તવિક ઓપરેશન સાથે મેળ કરોSKU પર મશીનિંગ પ્રકાર ગોઠવો જેથી તે ખરેખર કરવામાં આવતું ઓપરેશન દર્શાવે.
- Structure composite units in the catalogueStructure composite units such as cabinets with back panels, shutters and hardware in the catalogue.
- Understand how end panels are coded and shown in drawingsLearn that end panels do not carry a separate code from the cabinet they belong to.
- What the catalogue storesLearn which model furniture, props, accessories and shutter designs the catalogue holds.