Add a new edge band SKU with its material info

Add a new edge band SKU in Hardware > Edge Bands, filling in Thickness, Tape Width and the mandatory Material Info.

1. Add New SKU in Hardware > Edge Bands has Thickness, Tape Width and a mandatory 'Material Info*'.

2. A hardware rule (Design Intelligence > Hardware Rules, eye icon) shows its conditions (Component Cabinet / Scenario, SubComponent Panel 1 / Panel 2 / Scenario, Property e.g. Panel Type, Width, Elevation From Floor, Scenario Type), optional Designer Inputs, and 'Hardware to be added' with a fixed quantity or a Dynamic quantity by ranges (e.g. hinges From 0 to 300 mm, 300 to 900 mm … by shutter height).

   ✓ 19 ઑક્ટોબર, 2026ના રોજ પ્રોડક્ટમાં ચકાસેલ

3. Partition width limits in a SKU's Additional Properties (Minimum / Maximum Partition Width External, Partition Width Internal Min / Max) decide where a shutter system configuration is offered: a configuration whose limit a partition's width fails is left out of that partition's Shutter System Config carousel (Minimum Partition Width External 600 on a 450 mm wide partition: left out).

   ✓ 19 ઑક્ટોબર, 2026ના રોજ પ્રોડક્ટમાં ચકાસેલ