Publish to work orders
Guides: 52
- Share the same design or create a production design copyDecide whether to share the same design so edits sync automatically or create a production design copy that stays independent.
- Create a production design in copy modeCreate a production design in copy mode instead of share mode.
- Enable stacking per work order and set maximum stack heightTurn on stacking for a work order and set how high boards may stack in its board layouts.
- Fix production designs that cannot be created for an unapproved designApprove the design first, then create the production design.
- How work orders are created and republished for a designLearn how each design file sent to production becomes one work order, how updates republish it, and how room-wise scopes let you send only a finished portion.
- Publish a work order so the factory team can see it in the MES portalPublish or republish a design so its work order becomes available to the factory team in the MES portal and its outputs reflect the latest changes.
- Resync a production design from its source designResync a production design from its source design to add, delete and modify units, reviewing the impact before you confirm.
- Understand how shared designs appear in Production DesignsLearn how a design sent with Share Same Design shows up in the design portal's Production Designs and how it stays linked to its design.
- Download files from a published work orderOpen the published version of a work order to download raw-material CSVs and machine saw files.
- How the production workflow runs from design to work orderFollow how a finalised design moves through production and into the work order, carrying its materials with it.
- Publish a production design as a work orderApply the hardware and connector selections on the production design, then publish it as a work order.
- Track scanned panel progress in a work orderSee the progress of any scanned panel inside a work order, with green ticks for panels scanned at a station and panel-by-panel status within a project.
- Track work order progress by scanning panel label QR codesScan the QR code on a panel label to track a work order's progress through factory stations and mark completion at each scanned stage.
- Check which downloads need a published work orderSee which footer downloads stay disabled on an unpublished work order and which ones remain available.
- Edit channels in production design without returning to designCorrect a channel directly in the production design module after a design has been sent to production, without going back to the design module.
- Edit connector and construction changes through production designSend the design to production from Outputs, create a new production and open the production design so you can review and modify connector scenarios there.
- Re-download SAW file fresh from work order before diagnosing mismatchDownload the SAW file afresh from the work order so the machine reads the current design dimensions instead of an older export.
- Send a design to production and find it on Production DesignsSend a design to production from its own menu, then find the resulting production design on the Production Designs page so verification can begin.
- Update and resync a design to push it to productionUpdate the design and use the resync feature to push it to production.
- Verify materials with QC and create a work orderCheck that core, finished and edge band materials are correctly applied, then create a work order and download its outputs.
- Access production design from the main appReach production design from the main app rather than a separate production-design subdomain or portal.
- Batch rooms into one work order with work scopesUse work scopes to combine several rooms into one production run or split them into separate work orders.
- Download a work order with pending violationsWhen a work order still has pending violations, the MES portal warns you before download that the outputs may be incorrect and lets you choose what to do.
- Find your way around a production design copy's Production tabOpen a production design copy and use the Production tab toolbar and the Differences between work order and design dialog to compare the work order with the design.
- How work order numbers are assignedLearn that the work order number shown in the project is assigned by Infurnia and cannot be edited by the user.
- Publish a checked cut list to a work orderPublish a confirmed cut list so you can download the work order and get the final cutting list and machine outputs.
- Publish a job to the MES portalPublish the job to the MES portal from the production design portal so it reaches production.
- Publish a work order after checking the cut list and board layoutCheck the cut list and board layout in the production tab, then publish the work order under a name once both are error-free.
- Publish a work order to unlock downloadsPublish the work order so its downloads become available and an immutable published design version is created.
- Renumber unit and panel annotations in a production design copyUse Reassign unit/panel annotations in a production design copy to renumber units and panels by proximity and unit type for cleaner CNC file names.
- Resync a PD branch and keep both branches' changesResync a PD branch so it updates while keeping the modifications made in both branches, knowing that a conflicting PD-branch change is dropped.
- Review and accept admin setting differences on a work orderSee which work order settings differ from the admin values and accept them to continue to the Violations check or a CNC machine-files download.
- Review designs in the production design portal before a work orderBefore a work order is created, use the production design portal to review the design construction-wise.
- Review what changed and when in production design versionsOpen the Versions & History dialog in the production design to see each change with its action, timeline and user, so you can review what was changed on a given day.
- Share a production design linkUse the plain share link as the design link for production designs.
- Show client name and work order code columns in the cutlistSwitch on the client name and work order code columns in the cutlist field settings so they appear alongside the room name.
- Solve collisions in the production designRun Solve collisions from Violations to move connectors by the amount set in CAM Settings and review each change.
- Unarchive a production design from the Archived listBring an archived production design back to In Progress from the Production Designs > Archived list.
- Get CAM details, cut list and raw material BOQ from a production designProduce CAM details, the cut list and the raw material BOQ together from a production design, scoped and downloaded as you need.
- Download cut list and raw material outputs from the work orderPublish the work order, then download the cut list, raw material list and board layouts from the production portal.
- Output CNC files for a work orderAdd a machine in the production setup, choose the CNC panel-by-panel operation and download the generic MPR file.
- How the MES board layout reflects the work order snapshotLearn how the MES board layout shows the design state captured when a work order is cut, not later design edits.
- Choose panel and sheet label templates in a published work orderPublish a work order to make stickers and label settings available, then pick the default panel and sheet label templates for its board layout.
- Create a work scope and access the cut list in the production design portalCreate a work scope for a specific area so you can generate its cut list and reach the raw material bill of materials.
- Refresh output cache and resync after catalogue changesAfter changing finish or core material settings, refresh the output cache so updated grain and material properties reach the cut list and board layout.
- Choose which box label template a work order printsSet the default box label template for one work order so its labels print in the layout that client or project needs.
- Create a shipment for a work orderOpen the Shipment section for the work order, create the shipment with driver, vehicle, dispatch and receiver details, then scan box labels to mark them loaded.
- Create work scopes as batches and publish per batchSplit production work into batches, add the relevant items to each, and publish them batch by batch to get outputs.
More guides 4
Show all (4)
- Choose copy or share when sending a design to productionDecide whether to create a production design copy or share the same design when sending a design to production.
- Correct wrong materials and push the change to productionFix excess or wrong material types in the design and re-sync the work order so production picks it up.
- Manage connectors on ticked scenarios from the Actions menuPick a connector and apply it to the ticked scenarios, and use a connector card's three-dot menu for Publish, Filter for this, Replace and Remove.
- Track panels manually from the Manual tableOpen the Manual table, pick a published work order and track the panels you need at the station.