Production settings and work scopes
Guides: 13
- Create a work scope and access the cut list in the production design portalCreate a work scope for a specific area so you can generate its cut list and reach the raw material bill of materials.
- Replace a connector in the connector card in manufacturing settingsUpdate the connector in the connector card within manufacturing settings so production output uses the changed hardware connector, then confirm it appears correctly in the design.
- Understand what a workscope is in Production > Work ScopesLearn what a workscope covers and how separate workscopes are set up for the outputs you need.
- Create work scopes as batches and publish per batchSplit production work into batches, add the relevant items to each, and publish them batch by batch to get outputs.
- Disable units in bulk in Edit Work Scope > Show UnitsSwitch a unit off with Bulk Disable and see it move to Removed Units with an overridden status on its card.
- Understand work scopes and rooms for productionLearn that sending a design to production and defining a work scope both work without any room.
- Configure cut list columns and dimension accuracy in production settingsTurn on the cut list fields you need and set dimension accuracy so the production output rounds dimensions the way you want.
- Limit a cut list to one room with a work scopeCreate a work scope for a single room so the cut list reflects only that room's cabinets.
- Open QC Mode and understand its tabs and work scopeEnter QC Mode, see which work scope it opens on, and learn what each of the four tabs shows.
- Add machines and tool lists in production settingsAdd each machine with its type, then give it a tool list and pick the tool it uses.
- Batch rooms into one work order with work scopesUse work scopes to combine several rooms into one production run or split them into separate work orders.
- Set board layout and CAM settings in manufacturing settingsConfigure board layout and CAM settings, and change manufacturing range values globally, from manufacturing settings in the admin portal.