પ્રોડક્શન સેટિંગ્સ અને વર્ક સ્કોપ્સ
માર્ગદર્શિકાઓ: 13
- ઉત્પાદન ડિઝાઇન પોર્ટલમાં વર્ક સ્કોપ બનાવો અને કટ લિસ્ટ ઍક્સેસ કરોચોક્કસ વિસ્તાર માટે વર્ક સ્કોપ બનાવો જેથી તમે તેનું કટ લિસ્ટ જનરેટ કરી શકો અને કાચા માલનું બિલ ઑફ મટીરિયલ્સ મેળવી શકો.
- મેન્યુફેક્ચરિંગ સેટિંગ્સમાં કનેક્ટર કાર્ડમાં કનેક્ટર બદલોમેન્યુફેક્ચરિંગ સેટિંગ્સમાં કનેક્ટર કાર્ડમાં કનેક્ટર અપડેટ કરો, જેથી પ્રોડક્શન આઉટપુટ બદલાયેલ હાર્ડવેર કનેક્ટરનો ઉપયોગ કરે, પછી ડિઝાઇનમાં તે યોગ્ય રીતે દેખાય છે તેની ખાતરી કરો.
- Production > Work Scopes માં વર્કસ્કોપ શું છે તે સમજોવર્કસ્કોપ શું આવરી લે છે અને તમને જોઈતા આઉટપુટ માટે અલગ વર્કસ્કોપ કેવી રીતે સેટ કરવામાં આવે છે તે જાણો.
- Create work scopes as batches and publish per batchSplit production work into batches, add the relevant items to each, and publish them batch by batch to get outputs.
- Edit Work Scope > Show Units માં એકસાથે યુનિટ બંધ કરોBulk Disable વડે યુનિટ બંધ કરો અને તેની કાર્ડ પર ઓવરરાઇડ સ્થિતિ સાથે તે Removed Units માં ખસેડાયેલું જુઓ.
- Understand work scopes and rooms for productionLearn that sending a design to production and defining a work scope both work without any room.
- પ્રોડક્શન સેટિંગ્સમાં કટ લિસ્ટ કૉલમ્સ અને પરિમાણ ચોકસાઈ ગોઠવોતમને જરૂરી કટ લિસ્ટ ફીલ્ડ્સ ચાલુ કરો અને પરિમાણ ચોકસાઈ સેટ કરો, જેથી પ્રોડક્શન આઉટપુટ પરિમાણોને તમારી ઇચ્છા મુજબ રાઉન્ડ કરે.
- વર્ક સ્કોપ સાથે કટ લિસ્ટને એક રૂમ સુધી મર્યાદિત કરોએક જ રૂમ માટે વર્ક સ્કોપ બનાવો જેથી કટ લિસ્ટ ફક્ત તે રૂમના કેબિનેટ દર્શાવે.
- QC Mode ખોલો અને તેના ટૅબ્સ તથા કાર્યક્ષેત્ર સમજોQC Mode માં પ્રવેશ કરો, તે કયા કાર્યક્ષેત્ર પર ખૂલે છે તે જુઓ, અને ચાર ટૅબ્સમાંથી દરેક શું દર્શાવે છે તે જાણો.
- Add machines and tool lists in production settingsAdd each machine with its type, then give it a tool list and pick the tool it uses.
- Batch rooms into one work order with work scopesUse work scopes to combine several rooms into one production run or split them into separate work orders.
- Set board layout and CAM settings in manufacturing settingsConfigure board layout and CAM settings, and change manufacturing range values globally, from manufacturing settings in the admin portal.