Windows
Guides: 21
- Add a window in the floor planPlace a window in a wall and set its size and elevation before you click.
- Center a window and set exact wall spacingPlace a window in the middle of a wall and give it an exact distance from the walls.
- Add and resize windows with sill height elevationAdd and modify windows like doors, setting a sill height elevation and changing window dimensions directly on the drawing by clicking the displayed measurement.
- Edit a window after adding itSelect the window to open its Window panel and adjust its drawing layer, dimensions, shift, location, model, meshes and materials, or delete it.
- Place a window with configurable dimensionsPlace a window the same way you place a door, then set its dimensions to a standard size such as 800, 850 or 900.
- Place windows by drag-and-click using the pink triangle centre pointPlace windows with the drag-and-click method, then adjust their materials and properties such as elevation.
- Set a window's sill level with the elevation fieldEnter the sill level measured at site into the elevation field so the window sits at the right height.
- Tell when a dragged window is centred on its wallDrag a selected window along its wall and read the pink markers to see when it sits centred.
- Change door or window type via the Change Model optionSwap a placed door or window for another model from the carousel and adjust its size, hinge side and position.
- Change model, flip door sides/hinge, and set window sill heightPlace a door or window, then adjust its model, opening direction, hinge position and dimensions from its properties.
- Adjust door and window placement by clicking the dimensionClick a door or window's placement dimension and type a new value to move it, and set a window's width, height, thickness and elevation.
- Core design steps: wall, door, window, ceiling and tilingDraw the walls, add doors, add windows, add the ceiling and add tiling to complete a design.
- Create door or window cutouts by extruding through wall thicknessCut an opening for a door or window in a wall by drawing the cut area and extruding it through the wall thickness.
- Move a door or window to an exact distance from the wall sidePlace an opening centered on a wall, then use its side dimensions to set the exact distance from either side.
- Change door/window model, width, thickness, flip side and hingeSelect a door or window and use the modify menu to change its model, width, thickness, opening side and hinge position.
- Set wall height and thickness before adding doors and windowsSet the wall height and thickness, then define doors and windows by their height, width, thickness and elevation.
- Change wall, door and window properties from the Modify menuAdjust wall dimensions and colours, door and window sizes, window height and elevation, and swap window models from the Modify menu.
- Cycle wall location line, staircase side and window position with SpacebarPress the spacebar while drawing or moving walls, staircases and windows to cycle their location line, drawing side or position.
- Edit door and window dimensions, model, and flip hinges from properties tabSelect a door or window and open the properties tab to change its dimensions, floor elevation, and opening direction.
- Place doors and windows from the floor planAdd doors and windows to built walls from the floor plan, then adjust their dimensions and parameters.
- Set default door, window and wall properties via PreferencesSet default properties for repeated elements so newly added doors, windows, elevations and walls inherit the same values across all rooms.