窓
ガイド:21
- 間取り図に窓を追加する壁に窓を配置し、クリックする前にサイズと高さを設定します。
- ウィンドウを中央に配置し、壁からの正確な間隔を設定するウィンドウを壁の中央に配置し、壁からの距離を正確に指定します。
- 窓の追加と、窓台高さの指定によるサイズ変更窓はドアと同様に追加・変更できます。窓台高さを指定し、図面上に表示される寸法をクリックして窓の寸法を直接変更できます。
- Edit a window after adding itSelect the window to open its Window panel and adjust its drawing layer, dimensions, shift, location, model, meshes and materials, or delete it.
- Place a window with configurable dimensionsPlace a window the same way you place a door, then set its dimensions to a standard size such as 800, 850 or 900.
- ピンクの三角形の中心点を使って、ドラッグ&クリックで窓を配置しますドラッグ&クリック方式で窓を配置し、その後、材質や高さなどのプロパティを調整します。
- elevationフィールドで窓の窓台レベルを設定する現場で測定した窓台レベルをelevationフィールドに入力すると、窓が正しい高さに配置されます。
- ドラッグした窓が壁の中央に配置されたタイミングを確認する選択した窓を壁に沿ってドラッグし、ピンクのマーカーで中央に配置されたタイミングを確認します。
- Change Modelオプションでドアまたは窓のタイプを変更する配置済みのドアまたは窓をカルーセルから別のモデルに差し替え、サイズ、開き勝手、位置を調整できます。
- モデルの変更、扉の左右/ヒンジの反転、窓の腰高の設定ドアまたは窓を配置し、プロパティからモデル、開き方向、ヒンジ位置、寸法を調整します。
- 寸法をクリックしてドアと窓の配置を調整するドアや窓の配置寸法をクリックして新しい値を入力すると移動できます。また、窓の幅、高さ、厚さ、高さ位置を設定できます。
- 基本の設計手順:壁、ドア、窓、天井、タイル壁を描き、ドアを追加し、窓を追加し、天井を追加し、タイルを追加して設計を完了します。
- 壁の厚さを貫通するように押し出して、ドアや窓の切り抜きを作成します壁にドアや窓の開口部を切り抜くには、切り抜く領域を描画し、壁の厚さを貫通するように押し出します。
- ドアや窓を壁側から正確な距離に移動するPlace an opening centered on a wall, then use its side dimensions to set the exact distance from either side.
- ドア・窓のモデル、幅、厚さ、開き方向、ヒンジ位置を変更するドアまたは窓を選択し、変更メニューでモデル、幅、厚さ、開き方向、ヒンジ位置を変更します。
- ドアと窓を追加する前に、壁の高さと厚さを設定します壁の高さと厚さを設定し、次に高さ、幅、厚さ、高さ位置でドアと窓を定義します。
- Change wall, door and window properties from the Modify menuAdjust wall dimensions and colours, door and window sizes, window height and elevation, and swap window models from the Modify menu.
- スペースバーで壁の位置線、階段の側面、窓の位置を切り替える壁、階段、窓を描画または移動しているときにスペースバーを押すと、位置線、描画する側、位置を切り替えられます。
- Edit door and window dimensions, model, and flip hinges from properties tabSelect a door or window and open the properties tab to change its dimensions, floor elevation, and opening direction.
- Place doors and windows from the floor planAdd doors and windows to built walls from the floor plan, then adjust their dimensions and parameters.
- Set default door, window and wall properties via PreferencesSet default properties for repeated elements so newly added doors, windows, elevations and walls inherit the same values across all rooms.