창
가이드: 21
- 평면도에 창 추가하기벽에 창을 배치하고 클릭하기 전에 크기와 높이를 설정하세요.
- 창을 중앙에 배치하고 벽 간격을 정확히 설정창을 벽 중앙에 배치하고 벽으로부터의 거리를 정확히 지정합니다.
- 창턱 높이 올림으로 창 추가 및 크기 조정문처럼 창을 추가하고 수정할 수 있으며, 창턱 높이 올림을 설정하고 도면에 표시된 치수를 클릭하여 도면에서 직접 창 치수를 변경할 수 있습니다.
- Edit a window after adding itSelect the window to open its Window panel and adjust its drawing layer, dimensions, shift, location, model, meshes and materials, or delete it.
- Place a window with configurable dimensionsPlace a window the same way you place a door, then set its dimensions to a standard size such as 800, 850 or 900.
- 분홍색 삼각형 중심점을 사용하여 드래그 앤 클릭으로 창을 배치합니다드래그 앤 클릭 방식으로 창을 배치한 다음, 재질과 높이 등의 속성을 조정합니다.
- elevation 필드로 창의 창턱 높이를 설정하세요현장에서 측정한 창턱 높이를 elevation 필드에 입력하여 창이 올바른 높이에 위치하도록 하세요.
- 드래그한 창이 벽 중앙에 정렬되는 시점 확인선택한 창을 벽을 따라 드래그하고 분홍색 표시를 확인하여 창이 중앙에 정렬되는 시점을 파악하세요.
- Change Model 옵션으로 문 또는 창 유형 변경배치된 문 또는 창을 캐러셀의 다른 모델로 교체하고 크기, 경첩 방향, 위치를 조정합니다.
- 모델 변경, 문 방향/경첩 뒤집기, 창 sill 높이 설정문이나 창을 배치한 다음, 속성에서 모델, 개폐 방향, 경첩 위치 및 치수를 조정하세요.
- 치수를 클릭하여 문과 창의 위치를 조정합니다문이나 창의 위치 치수를 클릭하고 새 값을 입력하여 이동하며, 창의 너비, 높이, 두께 및 높낮이를 설정합니다.
- 핵심 설계 단계: 벽, 문, 창, 천장 및 타일링벽을 그리고 문을 추가하고 창을 추가하고 천장을 추가하고 타일링을 추가하여 설계를 완성합니다.
- 벽 두께를 관통하도록 돌출하여 문 또는 창 컷아웃 만들기벽에 문 또는 창을 위한 개구부를 만들려면 컷 영역을 그리고 벽 두께를 관통하도록 돌출합니다.
- Move a door or window to an exact distance from the wall sidePlace an opening centered on a wall, then use its side dimensions to set the exact distance from either side.
- 문/창 모델, 폭, 두께, 뒤집힌 면 및 경첩 변경문이나 창을 선택하고 수정 메뉴를 사용하여 모델, 폭, 두께, 개방 방향 및 경첩 위치를 변경하세요.
- 문과 창문을 추가하기 전에 벽 높이와 두께를 설정하세요벽 높이와 두께를 설정한 다음, 높이, 너비, 두께, 높낮이로 문과 창문을 정의하세요.
- Change wall, door and window properties from the Modify menuAdjust wall dimensions and colours, door and window sizes, window height and elevation, and swap window models from the Modify menu.
- 스페이스바로 벽 위치선, 계단 방향, 창 위치를 순환 전환벽, 계단, 창을 그리거나 이동할 때 스페이스바를 눌러 위치선, 그리기 방향 또는 위치를 순환 전환하세요.
- Edit door and window dimensions, model, and flip hinges from properties tabSelect a door or window and open the properties tab to change its dimensions, floor elevation, and opening direction.
- Place doors and windows from the floor planAdd doors and windows to built walls from the floor plan, then adjust their dimensions and parameters.
- Set default door, window and wall properties via PreferencesSet default properties for repeated elements so newly added doors, windows, elevations and walls inherit the same values across all rooms.