面板和自定义面板
指南:252
- 在板件级别设置可见与不可见封边值为板件的前边和其余各边分别设置封边值,使每一边都按预期完成封边。
- 将面板和抽屉构造偏移量归零以修正抽屉高度通过检查抽屉高度值并将影响它的面板和底部偏移量归零,修正高度或贴合度错误的抽屉。
- 使用圆角和板厚切割创建弧形板件边缘使用圆角工具为板件制作弧形边缘,将切割设置为板厚切割,并将该处理镜像到对侧。
- 使用弯曲自定义板件为弧形柜体建模了解弯曲自定义板件如何让您为弧形柜体建模,以及为什么标准柜体板件无法弯曲。
- 在柜体构造公式中引用板件厚度在构造公式中引用板件厚度时,请从建议中选择厚度参数,而不要直接输入原始数字。
- 克隆并修改柜体两侧的填充板克隆填充板并加以修改,使柜体每一侧都有各自的填充板。
- 通过构造扩展参数减小门板宽度通过调整门板的左右边缘值,在不改变整体柜体的情况下缩窄门板。
- 通过板件五金为板件添加配件钻孔将锁等配件作为板件五金放置在板件上,按板件尺寸定位,并在 2D CAM 模式中检查钻孔位置。
- 了解柜体板件材料与关联饰面查看柜体“材料”下每个子选项卡包含的内容,以及关联饰面和型材如何自动更改封边条和饰面。
- 使用 Cut 而非 Extrude 在板上切割形状在板件表面绘制形状,使用 Cut 而非 Extrude,按所需深度制作开孔或凹槽。
- 芯材如何决定板件厚度了解板件的厚度如何取决于您为其添加的芯材。
- Override a panel's inherited materialSwitch a panel property to custom so you can pick a different material for that panel alone.
- 在设计中对单个面板旋转纹理方向在设计模块中设置面板的纹理方向,并按需旋转每个面板的纹理,即可控制特定面板的纹理方向。
- Which panels are silently excluded from cutlist and production outputsLearn which panels drop out of cutlists, board layouts and production outputs while staying in the 3D design, and how to switch them off deliberately.
- 使用构造编辑面板设计创建带挖空的定制面板添加一块竖向面板,设置其高度、宽度和芯材厚度,在构造编辑面板设计中绘制挖空几何图形,并将切割分配给该面板。
- 使用编辑面板设计功能和偏移矩形在面板上创建切割通过绘制切割形状并用偏移矩形移动其边缘来切割面板,同时保持面板轮廓完整。
- 使用编辑形状绘制非矩形板件形状板件不限于90度的矩形,在板件构造中您可以绘制任意轮廓。
- 通过板件级构造中的编辑形状为板件倒圆角要为板件或层板倒圆角,请选中它,在板件级构造中选择编辑形状,选取要倒圆的边并输入半径。
- 将切割厚度设为面板厚度并包含在 CAM 中在面板上创建切割,使其厚度与面板匹配,并打开 include in CAM 选项,以便切割进入 CAM 输出。
- 使用自定义板件或建筑楼板工具制作圆弧造型对于标准柜体无法带入生产的圆弧或曲面构件,可通过将其建模为自定义板件,或在建筑楼板工具中建模来表示。
- 为柜体板件添加锁在设计中将锁添加到板件上,并将板件尺寸减少 30 mm 以容纳锁。
- 向抽屉系统添加自定义板件,并将其映射为柜体材料在抽屉系统层级添加自定义板件,并在任意板件层级设置其材料,以将其映射为柜体材料。
- 添加侧边填充板和延伸板以对齐在板件级构造中检查板件的正面,并将前部深度延伸设为门板厚度,即可对齐板件。
- 通过Edit Panel Design应用异形封边或线条造型打开面板的Edit Panel Design选项,更改其造型,以应用异形封边或线条造型。
- 使用Edit Panel Design在一块面板上应用多种饰面板在需要不同饰面的区域上添加形状,即可为单块面板赋予多种饰面板或材料。
- 通过编辑形状创建 L 形板件打开面板,进入板件层级并选择编辑形状,开始制作 L 形板件。
- Edit panel design to add cutouts and rotate panelsCreate cutouts such as back-panel grooving and rotate panels when needed by editing the panel design.
- 启用手动标注尺寸的柜门板,以测量柜体到柜门的距离在平面图中,通过启用手动标注尺寸的板件并选择柜门板,测量从柜体到柜门的距离。
- 使用构造设置和公式将板件延伸至地面通过板件的构造设置将可见板件延伸至地面,并用公式驱动板件尺寸,使其自动调整。
- 外露板的饰面如何应用了解外露板默认如何获得饰面,以及如何让某块板呈现不同的外观。
- 从单个柜体的构造中移除一块板件仅关闭所选柜体上的底板或背板等板件,而不改动组件定义。
- 通过 Reduction 而非 Extension parameters 调整门板尺寸如需将门板调大或调小,请使用 Reduction 参数,而不是 Extension parameters。
- 为非标准尺寸添加自定义面板当搁板或隔板需要标准尺寸参数无法生成的尺寸或位置时,请添加自定义面板。
- 为板件添加凹槽并设置其 CAM 工序类型编辑板件形状以添加指定深度的凹槽,然后将其加入 CAM 部分以设置其工序类型,例如铣削。
- 在柜体层级添加水平自定义板件并旋转它使用柜体层级自定义板件为柜体添加顶板,然后添加一块水平自定义板件并将其放置到任意位置。
- 检查立面偏好设置中是否已启用手动标注板材尺寸确认用于启用手动标注尺寸板材的选项默认已开启,并了解它如何影响背板和柜体板。
- 比较 tandem box 与 none 抽屉的板材构造查看 tandem box 抽屉和 none 抽屉各有哪些木板件。
- 复制、乘数和固定距离选项可复制面板形状使用复制、乘数和固定距离沿直线或图案重复面板形状,无需逐个绘制每个形状。
- 使用拉伸、偏移移动、圆角和切割创建自定义面板设计绘制并塑造自定义面板设计,圆化其角部并切出贯通开口。
- 弧形竖向自定义板件的长度和高度需手动计算竖向自定义板件提供弧形选项。
- 通过Edit Shape或Edit Panel Design自定义板材更改板材的外形,例如从矩形改为圆形或椭圆形,或添加边缘曲线。
- 用参数值驱动面板和门板尺寸为面板和门板尺寸指定参数值,这样当驱动尺寸变化时,它们会自动调整大小。
- 为踢脚板启用手动标注尺寸在首选项中开启手动标注尺寸,以便为踢脚板标注尺寸。
- 固定板件尺寸,使其不再随单元缩放将板件的长度、深度或高度设为固定值,这样缩放柜体或衣柜时该板件尺寸保持不变。
- 在柜体中放置自定义板件从目录中或使用Add Custom Panel添加自定义板件,沿虚线轮廓放置并单击确认。
- 将自定义柜体板设置为弧形形状为自定义水平板设置弧形形状,并设置其平直长度、半径和弧角,使其宽度随展开长度变化。
- 从违规面板或手动解决钻头碰撞从违规列表中解决已报告的钻头碰撞,如果碰撞仍然存在,再自行调整偏移量。
- 了解衣柜踢脚结构中的前板和侧板了解衣柜踢脚结构中前板和侧板是如何构建的。
- 了解面板延伸方向 L、R、B 和 F了解四个延伸方向 L、R、B 和 F 的工作方式,以及某一侧的负值如何从该侧缩小面板。
- 通过构造在单元内添加参数化自定义面板在单元内添加水平顶板,并用参数化公式控制其尺寸和位置。
- 使用自定义板件添加水平或垂直板件和搁板使用自定义板件选项放置水平或垂直板件,并将其变成柜体内的搁板。
- 为面板设计的内外区域应用不同颜色创建面板设计,并将其基础颜色和应用颜色映射到柜门外部、柜体外部、柜门或自定义饰面,使内外区域显示不同颜色。
- 从属性中更改填充板的类型和尺寸通过在其属性中编辑尺寸,或用正确类型的填充板替换,来修正填充板。
- 在单个板件级别更改已关联的板件饰面在单个板件级别将板件标记为自定义,以便在此更改其已关联的饰面或封边。
- 通过材料选择器更改板件的芯材打开材料选择器,在页面上选择芯材,然后在板件层级设置板件角色。
- 从板件区段更改单块板件的材质选择一块板件,为它单独指定材质,与柜体级材质分开。
- 通过下载超大板材 PDF 检查超大板材找出超过板材尺寸的板材,并在设计中逐一修正。
- 在单柜凸轮模式下检查板件之间的连接查看柜体各板件之间的所有连接场景、每个场景使用的连接件卡片以及实际钻孔。
- 在层板面板设置中选择固定层板或可调层板决定每个层板是永久固定在原位,还是可以拆下并重新定位;将层板设为固定,可获得整洁的抽屉外观。
- 控制手动标注捕捉到哪些板件在立面图中,通过在'Enable panels for manual dimensioning'设置中选择板件类型,决定手动标注捕捉到哪些板件类型。
- 在面板上创建中心镂空绘制镂空形状,用点击移动来定位,然后将面板设置为按面板厚度切穿。
- 创建开放式壁柜板件,并将门板机制设为无当单元不是门板时,将门板机制设为无。
- 在板上切割具有闭合边界的形状绘制一个闭合边界形状,将其标记为切割,并设置切割深度,以便软件知道在板的何处进行切割。
- 使用Change Length、Shift Edge和Offset编辑面板形状在Edit Shape中重塑面板轮廓,并使用Edit Panel Design中的Offset在其内部添加边框。
- 在构造部分编辑板件设计在构造部分编辑板件设计,以减小板件尺寸,并添加自定义形状或定义为具有指定尺寸的切割的挖空。
- 启用面板以使用 Annotate Align 进行手动标注尺寸开启相应偏好设置,使面板可以使用 Annotate Align,从而在设计上手动放置尺寸。
- L形自定义板件的厚度是如何得出的了解L形自定义板件可以设置哪些尺寸,以及为什么其厚度是固定的。
- 如何计算抽拉式抽屉(tandem drawer)的面板尺寸了解抽拉式抽屉的底板和背板深度与高度是如何根据抽拉式抽屉项目的尺寸得出的。
- 自定义板件如何列在柜体下了解自定义板件根据添加位置的不同,会列在哪个柜体下。
- 扩展与柜体调整如何决定板件尺寸了解板件的总厚度如何由其芯材和饰面计算得出,以及预贴面与后贴面芯材的计算方式有何不同。
- 保持两侧板的 minifix 与木榫方向一致将柜体的两个上边缘设为相同的构造,使左右侧板上的 minifix 与木榫连接件方向一致。
- 使用普通面板后方的盒式填充件制作背光面板在普通前部面板后方添加盒式填充件,并在其中放置灯带,即可制作背光面板。
- 将一块板件设计形状镜像到对侧柜门使用 MI 镜像所选形状,将操作从复制切换为移动,然后从顶部中心选到底部中心,使其落到对侧柜门上。
- 使用平移面板按精确距离移动对象在平移面板的轴位置字段中输入数值,即可按精确距离移动所选对象。
- 按设定距离偏移板件边界将板件边界从外边缘偏移,即可在四周获得均匀边距,无需手动测量。
- 使用隔板高度、深度和层板内缩来定位隔板通过添加自定义板件、旋转它,并设置其左右尺寸以及 X 和 Y 位置,来放置水平隔板。
- 查看输入的尺寸与切割清单中的板件尺寸了解为什么板件的可编辑尺寸与进入切割清单和板材排版的值不同。
- 通过面板级自定义移除门板分隔移除门板上的分隔,使门板显示为无分隔线的整块面板。
- 按固定距离重复板件,或按固定数量复制按设定间距重复板件,或在整面墙上均匀分布固定数量的板件。
- 在单元上设置外露侧板在板件层级打开该单元,并将该板件改为外露板件,因为它无法设为单元级默认值。
- 设置前板与底板延伸量为抽屉系统配置 Front Panel Extension 和每侧的 Bottom Panel Extension 值。
- 设置滑动门板的尺寸和构造参数设置滑动门板的尺寸,并控制其轨道和门板相对于柜体的位置。
- 为gola和G型材柜体设置顶板尺寸了解gola型材如何使顶板向后偏移,而G型材则使顶板保持与柜体尺寸一致。
- Split top and bottom panels 按垂直隔板拆分将柜体的顶板和底板按每个垂直分区拆分为一块,使每块随其分区宽度变化,且边缘件自动延伸至侧板之上。
- 了解如何测量板件延伸量了解板件延伸量按柜体深度加门板厚度计算,默认系统在柜体与门板之间保留 2 mm 间隙。
- 了解板材的材质来源了解每块板材的芯材、饰面和封边如何根据板材的角色继承柜体级别的通道。
- 使用板件类型条件在五金规则中区分门板变体为特殊的门板变体指定单独的板件类型,使五金规则无需门板设计标签即可将其区分开。
- 为倾斜柜体形状使用自定义面板通过使用单独的自定义面板而非旋转标准柜体面板,创建倾斜或非标准柜体形状。
- Add and size a custom panel on a cabinetAdd a custom panel from a cabinet's Construction tab, then set its shape, dimensions and position, using expressions of unit parameters when the panel sits inside a unit.
- 在衣柜下方添加底部支撑板设置底部支撑板的数量和高度,使其在踢脚区域内均匀地立在柜体底部下方。
- Add connector scenarios to a cabinet panel via bulk restructureAttach hardware connector scenarios to a cabinet panel by importing them from styles through Bulk Restructure.
- Add grooves, cuts and extrusions to panelsUse the Edit Panel Design tool to draw a shape on a door or panel and cut or extrude it into aesthetic patterns or custom cutouts.
- Adjust panel front thickness at shelf or individual panel levelSet shelf and panel reveals in millimetres to position shelves and panels precisely from the carcass front.
- Adjust panel-level reduction to resize an external drawerChange the panel-level reduction parameter with a minus value to make an external drawer larger.
- Assign panel types to split skirting segmentsGive split skirting segments the panel types that let hardware and connector rules tell them apart from unsplit skirting.
- Choose between single and top chimney panelsPick the chimney panel variant that gives you just the front or both the front and the top.
- 使用 Solve Collisions 清除板件碰撞使用 Solve Collisions 选项可自动清除大量板件碰撞。
- 配置板件标签和包装箱标签、字段以及徽标位置设置哪些逐板件字段打印在板件标签上,以及组织徽标位于包装箱标签上的什么位置。
- Confirm the half-top panel is false for a full topCheck the half-top panel setting so a full top is built correctly.
- Decide when to fix a panel's materialChoose between editing an existing panel and adding a new one, and keep custom materials to panels meant to stay fixed.
- Drive panel extensions and offsets with parametersBind extension values, offsets and cutouts to design parameters so they update when the model changes.
- Filter panels by type to bulk-select shelves and partitionsFilter the panels list by unit SK name and panel type so you can select many shelves or partitions at once and change their finish in one action.
- Find panels not following carcass materialSpot panels whose custom core material does not follow the carcass by looking for the custom core property under the core section.
- Fix a panel's internal finish that will not changeWhen a panel's internal finish will not change in any output, an automation rule may be overriding it.
- Fix laminate that does not resize with panel heightLearn why a manually pasted laminate or colour rectangle stays at a fixed position and size when the panel height changes.
- Fix skirting panels inheriting unexpected materialsWhen a skirting panel picks up the wrong material in every new design, check whether an admin skirting preference is overriding the component's configured inheritance.
- Give stacked panels a front shift equal to the lower panel thicknessGive the upper panel a front shift equal to the thickness of the panel below it so the two surfaces do not overlap.
- How back and front panel extensions are set in preferencesLearn how the back, front and drawer bottom extensions are configured separately in preferences.
- How exposed panels take shutter core and finishLearn what happens to a panel's core material, finish and board layout when you change it to an exposed panel.
- How extrusion and cut differ on a panelLearn how extrusion projects outward from a panel surface while a cut carves into it, either as a through cutout or to a set depth.
- How panel drill details show connector, hardware SKU and ruleSelecting a panel's drill in a design shows the connector, hardware SKU, applied rule and drill dimensions, and those values can be changed in the admin portal.
- How panel thickness formulas read the cabinet-level core materialLearn where a panel thickness formula such as carcass panel thickness or shutter panel thickness takes its value from.
- Identify a selected panel by its Panel IDWhen you select a panel, the left panel shows several identifiers, and the Panel ID is the last one shown.
- Make a panel follow another finishLink a panel's finish slot to another finish so the panel inherits it and updates automatically when that finish changes.
- Match gimbal arrow colours to the Position panel axesLearn how the colour of each gimbal arrow tells you which axis value in the Position panel to edit.
- Order filler panels wider than the leftover site gapEnter a filler panel width larger than the actual gap in the design, because the panel is produced at the size you enter.
- 为非标准横撑和支撑放置自定义面板在柜体内部添加自定义面板,以便在标准结构未提供的位置放置横撑或支撑。
- Position drills in 2D panel mode with XYZ coordinatesAdd drills in 2D panel mode and fine-tune their placement by applying an offset to the default position.
- Remove software-generated operations in panel 2D CAMLearn why some operations in panel 2D CAM cannot be deleted directly and how to remove them by reverting the shape.
- 从快捷键面板搜索任何命令或快捷键在快捷键面板的搜索框中输入内容即可查找任何命令或快捷键,无需在菜单中逐一查找。
- 在design portal中查看板材类型打开Select a panel并打开其信息选项,即可查看板材名称和板材类型。
- 在属性面板中查看元素的属性在设计中选择任意元素,即可在属性面板中查看其属性,包括墙体、门和窗的具体信息。
- Select a panel profile for a panelOnce profiles are configured, select from the available options for the panel you are designing.
- Set X offset to zero at filler panel levelSet the X offset to zero when working at the filler panel level so the placement is correct.
- Set a custom panel's panel type so rules matchGive a custom panel the correct panel type so panel-type rules and their connectors apply to it.
- Set a shelf panel to the Adjustable shelf type with a glass coreSet a shelf panel to the Adjustable shelf type and give it a glass core material such as a tinted glass of a given thickness.
- Set panel visibility and finish per panelSelect the correct panel before changing its finish, because visibility settings apply per panel.
- Set the bottom panel offset to raise the bottom panelSet the bottom panel offset to control the clear gap below the bottom panel and raise it by the side panel height when needed.
- Target specific panels instead of the broad carcass panelNarrow a rule's panel-type condition so connectors land only on the panels you intend.
- Understand corner unit panel headings and quotation categoriesLearn how a corner unit's panel heading and details differ from other Base Unit, Wall Unit and Tall Unit products and how it appears in the Pricing Quotation.
- Understand how a furniture light's panel lists its light sourcesLearn how a furniture light's panel lists each light source by position and what its properties and multi-selection behaviour are.
- Understand which panel is panel two in hardware drillingLearn which panel is classified as panel two when a drill falls on its edge band.
- Update panels with Custom Finish after a bulk finish changeChange project finishes in bulk, then update any panel whose finish source is set to Custom Finish one by one on the panel itself.
- Use reduction options to adjust panel left, right, top and bottomSet reductions on the left, right, top and bottom of a panel in the construction panel settings, where the number you enter reduces that panel dimension.
- 将柜体、侧板和封边饰面与门板匹配分别设置柜体和侧板的饰面,并让封边跟随门板的可见封边设置。
- 将门板设计应用到选中的门板面板打开Modify Shutter Design库,选择一个设计,并将其按成品尺寸应用到选中的门板面板。
- 将板件延伸至目标深度或延伸至背板输入正确的延伸量,以达到目标总深度,或让板件延伸至柜体后部。
- 插入滑动门板系统并为面板应用外部饰面通过插入滑动门板系统、自定义面板设计选项并为面板应用外部饰面,完成衣柜。
- 在应用饰面之前为板材设置封边条在目录中创建封边条条目,为每块板材或门板逐边指定封边条,并在板材级设置中更改单条边的饰面。
- 在板件层级编辑板件,以更改背板厚度在板件层级编辑该单块板件,即可让背板采用更厚的柜体厚度,例如岛台厨房使用 18 mm。
- 创建带自定义面板的弧形柜并编辑面板设计在柜体层级添加自定义面板,依据柜体参数设定其尺寸,并调整其偏移量使其位置正确,从而构建弧形柜。
- 单独覆盖一个门板或板材,不影响其他部分为单个门板设置独立的设计和饰面,或更改单块板材的材料,而柜体的其余部分保持不变。
- 添加自定义支撑板,并设置背板偏移和开槽添加一块带有自身芯材、饰面和标签的支撑板,并在扩展参数中配置背板偏移和开槽深度。
- 在板件层级将门板的芯材改为玻璃将门板的芯材切换为普通玻璃等自定义材料,并通过所选芯材设置玻璃厚度。
- Choose between shutter system configuration and panel editsDecide when to manage glass and frame variations through the shutter system configuration and when to edit the panel material directly.
- 在柜体板上按设定距离添加灯带在柜体板上添加灯带,并设置其到板边的距离。
- 在设计里配置柜体的背板、顶板、底板和侧板逐个配置每块柜体板件,使其尺寸、材质、封边、灯光和五金符合你所需的构造。
- 为柜体的每块板件应用同一条封边条在柜体层级添加封边条,使其应用到该柜体的每块板件。
- 创建构造样式,为各板材统一应用相同的封边条创建构造样式,使相同的封边条应用于不同板材,然后按构件进行微调。
- 通过板件级编辑板件设计在门板上创建挖空在板件级编辑板件设计中绘制形状,并将其设置为切穿板件厚度,即可在门板上挖出该形状。
- 将板件向下延伸至地面,而不显示踢脚板在板件的构造设置中使用延伸参数,使板件延伸至地面,而不显示踢脚板。
- 了解背板和抽屉底板面板的自动开槽了解软件何时会自动添加开槽,以及如何一次性更改所有单元中背板面板的开槽。
- 为柜板添加射灯或灯带并设置其光源为柜板添加灯带或射灯,为射灯指定光源并调整其位置,并在不再需要时移除任一灯具。
- 在隔板或板件层级调整层板内缩量在隔板层级更改层板内缩量,或在板件层级移动单个层板的前边缘,使内部层板避开冲突。
- 将柜门与板件和隔板对齐调整各边的缩减量,使柜门齐平、保持全高,或让隔板露出一部分。
- 在柜体层级更改门板颜色,在板件层级更改板材饰面为整个柜体设置门板颜色,为单个板件设置外饰面。
- 使用构造选项卡延伸板材在构造选项卡中输入延伸值,即可让板材在其左侧、右侧、前侧或后侧延伸。
- 使用延伸参数延长或缩短板件边缘使用四个方向的延伸字段来加长或缩短板件边缘,包括输入负值。
- How hinge quantities are generated for carcass and shutter panelsLearn why hinges are counted from the interaction between a carcass panel and a shutter panel, and what happens when the carcass panel is turned off.
- 衣柜侧板如何落地了解衣柜侧板如何通长落地,以及为何要为前踢脚板开缺口。
- 侧板或侧踢脚板之间的内嵌后踢脚板添加后踢脚板,使其内嵌于侧板或侧踢脚板之间,让侧板封闭踢脚板两端。
- 在板件层级添加灯带在底板添加灯带并设置其参考位置,然后对左侧板等其他板件重复此操作。
- Customize drawer height, channel and bottom panel thicknessAdjust the drawer height, channel settings and bottom panel thickness so the drawer construction matches the required dimensions.
- 设置抽屉高度、门板缩减量和柜体1mm缩减量配置抽屉设置结构和抽屉层级的构造,并设定所需高度,然后在抽屉层级设置门板缩减量。
- 了解中间柜体侧板的构造了解中间柜体侧板默认如何构造,以及左、右、上、下侧板如何拼接在一起。
- 了解快捷访问面板中的橱柜高度了解厨房橱柜的快捷访问面板中显示的高度测量的是什么,以及编辑它会改变什么。
- 使用自定义饰面和匹配属性将饰面复制到板上要为外部饰面由来源驱动的板应用特定饰面,请选择该板,打开外部饰面来源,然后选择自定义饰面。
- 将灯带和射灯添加到吊柜底板通过向吊柜底板添加灯带和射灯,为吊柜提供照明。
- 为吊柜的板件添加灯带并设置其颜色为吊柜照明,可在其板件上添加灯带,选择正面或背面,并在设计的“灯光”偏好设置中设置颜色。
- 从墙面部分的属性面板应用墙踢脚线在墙面部分的属性面板中开启Wall Skirting,并选择要应用到墙面的踢脚线饰面。
- 更改台面厚度不会自动更改顶板了解为什么更改台面厚度后,厨房地柜的顶板仍为横撑板。
- 通过编辑面板设计并切割来创建弧形柜门在Edit Panel Design中绘制柜门形状,并按面板厚度切割,以创建弧形柜门。
- 固定踢脚板高度,使面板自动调整更改踢脚板高度值,使总高度重新应用,面板无需手动编辑即可调整。
- 抽屉底板如何开槽嵌入抽屉侧板了解 Infurnia 如何将抽屉底板开槽嵌入抽屉侧板,包括木制抽屉构造中使用的四边开槽。
- 在设计面板层级调整柜体端板的尺寸,而不是在admin portal中在设计阶段的面板层级更改柜体端板的深度,使更改仅应用于您正在处理的柜体。
- 了解厨房地柜转角单元的顶板了解厨房地柜转角单元使用整块顶板。
- 使用自定义面板家具选项添加自定义胶合板面板将自定义胶合板面板放置在地面上,调整其尺寸,然后在 3D 视图中检查。
- 从家具选项添加自定义水平或垂直面板使用轴控件调整尺寸和位置,用自定义附加面板填补阁楼柜与吊柜之间的空隙等缺口。
- 通过面板部分的构造为搁板添加型材在所需的一侧,从面板部分的构造/顶部设置中添加型材,即可将型材放到搁板上。
- 通过面板编辑面板设计创建自定义凹槽在面板上绘制凹槽形状,将其设为具有深度和材质的挖空,然后按固定距离重复该形状。
- 通过带有参数化公式的板件设计创建抽屉开孔在柜体板件上于板件设计中绘制一个矩形,并用参数驱动其边,使抽屉开口自动更新。
- 通过内缩竖向板来创建并排抽屉用固定层板和竖向板将分区一分为二,为每一半分配一组抽屉,然后通过将板向内移动来隐藏竖向板。
- 使用 R 拉手延长板件侧边使用 R 拉手将板件延长指定量,例如 100 mm。
- 延伸底板,遮盖踢脚线断开处的缝隙Select the panel and extend it to cover the gap where a separate skirting would otherwise break.
- 处理弧形板件及其开料清单长度将弧形板件作为一个整体建模,并在开料清单和报价中读取其展开后的毛坯长度。
- 柜门颜色与各区域颜色如何在面板上组合了解柜门颜色如何设定多区域面板的基础颜色,而单独指定了颜色的区域则保留其颜色。
- 使用柜体板厚度将柜体底板向内偏移将底板抬高一个板厚,使其位于柜体内部,而不是位于侧板下方。
- 通过底部抬高和底板偏移来定位抽屉盒使用底部抬高将抽屉盒抬离门板底部,并通过偏移量微调底板,请注意偏移量会减小抽屉盒高度。
- 使用踢脚板面板上的负向后延伸来缩小踢脚尺寸在面板编辑器中应用负向延伸,以缩短一段踢脚并在踢脚周围安装侧面板。
- 在柜体板件自身的层级上设置饰面和层板选项打开柜体板件自身的层级,选择其外饰面和内饰面的来源,为该板件单独选择自定义饰面,并设置层板的类型和可见性。
- 按板件设置灯带位置以避免碰撞按距前边缘或后边缘的距离,为每块板件定义灯带位置,使灯具避免碰撞。
- 了解场景如何列出柜体和相接板件了解场景如何先命名柜体板件、再命名与之相接的板件,并以面来指明相接的一侧。
- 了解隔板,并在柜体内添加层板、板件或抽屉了解 Infurnia 中隔板的含义,并在隔板层级添加层板、竖向板件或抽屉。
- 使用多功能模型家具代替手动板件来制作框架箱体放置一个已包含其框架箱体的单元,并通过编辑深度值来调整箱体深度。
- Use the selection tree to reach cabinet, partition, shutter and panel controlsSelect a cabinet part to expose the levels above it and jump straight to the controls you need.
- 通过Furnish > Panels添加自定义竖向面板并应用饰面板饰面选择材料和饰面,然后设置尺寸,即可创建自定义竖向面板。
- 从抽屉面板更改抽屉饰面设计从抽屉面板选择其他抽屉饰面设计。
- 在板件层级更改踢脚板的封边在板件层级更改踢脚板区域,使其拥有与柜门不同的封边。
- 在内板和门板之间创建铰链自定义场景将连接件来源设为手动,然后创建场景连接件并添加相关连接件卡片,例如盲角连接件。
- Edit Panel Design 中切割形状的封边和材料了解 Edit Panel Design 中的切割形状如何带有封边,并采用材料以实现预期的饰面。
- 单柜在单件面板偏心轮模式下的Edit connector卡片间距仅更改一个柜体的连接件卡片间距,不影响任何其他柜体。
- 熟悉设计界面:楼层栏、平面图/3D 切换和属性面板在设计界面中找到楼层栏、平面图与 3D 切换、分组工具栏、属性面板和演示图纸。
- 通过面板级可见性隐藏或删除柜体板件在柜体的Construction > Carcass > Carcass Panels Visibility中关闭单个柜体板件。
- 从属性面板修改台面和拉手在属性面板中,Select units 可更改台面材质和厚度,或更换拉手。
- 了解单元级更改如何传递到板件了解单元级材料更改何时会传递到板件,以及自动化规则和关联 SKU 如何覆盖该更改。
- 设置抽屉填充板宽度并匹配填充面板材料厚度为抽屉填充面板设置其专属的定制芯材,使其厚度与周围 25 mm 板材一致,从而加厚该填充面板。
- Set the carcass railing option for the top panelSet the carcass railing option so the top panel is a rail panel or a full panel, and adjust construction per side to match the required design.
- 使用 Edit panel design 修剪侧板以匹配斜顶板使用 Edit panel design 或 Edit shape 调整侧板,使其与自定义斜顶板的角度相匹配。
- 了解柜体、衣柜和自定义板件类别了解 Infurnia 如何将单元分为三个不同类别:柜体、衣柜和自定义板件。
- 将端板和侧板理解为独立的板件类型了解柜体的侧板和端板为何是各自拥有独立延伸设置的独立板件类型。
- 了解可见板件侧面上的Design Check加工警告了解Design Check为何将可见侧面带有加工的板件报告为问题。
- Add a custom horizontal panel sized from carcass width and thicknessAdd a horizontal custom panel inside a cabinet and size it from the carcass width, depth and panel thickness so it aligns correctly.
- 为斜顶添加自定义倾斜面板计算所需的倾斜度,并相应增加面板尺寸,以为斜顶添加自定义倾斜面板。
- Add kitchen units from Furnish panel dropdownsAdd base, sink, drawer, tall/appliance and filler units to your kitchen plan from the Furnish panel dropdowns.
- Add strip lights to a panel and set their side, orientation and positionAdd a strip light from the selected panel's panel options, then move it to the other face, choose Horizontal or Vertical, and shift it along the panel.
- Apply a strip light to a panelPlace a yellow strip light in the 3D model.
- Assign materials by searching subcategory in the material panelOpen the material or properties panel and select a material to apply it to the selected geometry.
- Attach utility hardware manually at panel level in designAttach utility hardware to a panel by selecting it and adding the item from the panel hardware list.
- Build cabinet units by dividing with shelves and vertical panelsDivide a cabinet unit with shelves and vertical panels, then adjust the section heights afterwards.
- Cabinet properties panel tabsLearn how the cabinet properties panel is organised into quick access, customize and construction tabs.
- Change core and finish materials from the properties panelChange core and finish materials from the properties panel.
- 通过管理门户批量操作更改抽屉底板偏移通过管理门户使用批量操作和面板级编辑设置抽屉底板偏移,并选择适合材料的厚度。
- Choose custom and kitchen filler panel typesLearn which custom panel shapes and kitchen filler panel types you can add to a design.
- Control wardrobe side panel visibilityControl whether the side panels of a wardrobe are shown.
- Create a headboard design as a custom panel inside a cabinetTurn a cabinet into a headboard by keeping one back panel and adding a tilted custom panel you shape, finish and save.
- Extrude or cut grooves on a panel via Edit Panel DesignCreate grooves or raised shapes on a panel by adding a shape in Edit Panel Design and applying it.
- 在柜体编辑面板的选项卡中查找设置使用 Quick Access、Customize 和 Construction 选项卡以及选择树,找到您需要的设置。
- Fix hardware missing on custom panelsCheck panel types, dimensions and exposed status when expected hardware is not generated.
- 五金件孔位仅显示在应用该五金件的面板上了解五金件孔位在柜体中显示的位置,以及预期孔位可能缺失的原因。
- 使用图层面板中的图层隐藏或取消隐藏项目通过切换项目所在图层的可见性,可一次隐藏或显示整组项目。
- 五金钻孔如何落在拆分后的顶板和底板上了解当柜体的顶板和底板拆分为各分区部件时,开合机构五金钻孔是如何放置的。
- How hardware rules fire on custom panelsLearn how a hardware rule targeting a custom panel type fires depending on how the panel is placed and which component and subcomponent conditions you set.
- L 形转角板和五边形转角板上的灯带如何工作为 L 形转角或五边形转角单元添加一条灯带后,它会变成两条相连的灯带,分别沿 L 的两条边延伸。
- How wardrobe width affects the top panelLearn when a wardrobe uses a single top panel and when its width splits the top panel into two SKUs.
- Offset a line with copy or move in panel designChoose copy to duplicate a selected line at a distance or move to relocate it without a duplicate.
- 将水槽放在台面上,而不是斜面板上水槽只能放在花岗岩等台面上;如果需要在斜面板或有角度的面板上放置水槽,请使用手动插入的水暖配件。
- 在 Outputs 设置中重新分配单元和面板标注使用两种模式之一重新编号输出中的单元和面板标签,请先确认,因为此更改无法撤销。
- Revert a sketch panel to a simple rectangular panelConvert a sketch panel back to a simple rectangular shape using Revert on its Edit Shape toolbar, confirming the prompt to continue.
- 旋转板材上的饰面纹理方向在板材的 material 区域中,可将板材表面的三聚氰胺饰面纹理旋转 0、90、180 或 270 度。
- 设置盲角柜和假面板构建一个盲角柜,在门板和不可开启的前面板之间设置假面板,并设置其深度。
- Toggle drawer side panels on or off via panel visibility settingsShow or hide a drawer's side panels by selecting the drawer and using its panel visibility options.
- Understand how carcass configuration drives panel sizesLearn why panel sizes follow the carcass that was actually built and how to adjust thickness when needed.
- Use a shutterless box behind a unit for support panelsUse a shutterless box behind a unit to provide the support structure without a visible shutter.
- Use the cutting tool on ceilings, panelling and wardrobe panelsApply the cutting tool to ceilings, panelling and wardrobe panels, not just one surface type.
更多指南 8
显示全部(8)
- 在创建通切的那个面上查找它翻转到创建切口的那个面即可查看或编辑它,因为每个板件的面都是独立处理的,通切在其他情况下只会在 3D 视图中显示。
- 不支持曲线切割;只能加工直线切割了解可加工哪些切割,以便按设定深度和间隔规划墙板凹槽,而不是曲线切割。
- 通过前移偏移拉伸面将拉伸形状的前表面移动一段距离,使面板相对于另一图层偏移。
- 在添加新的连接件场景之前,移除所有现有连接件启用该选项,以便在添加所需连接件之前移除受影响板材上的所有现有连接件,从而使新场景能干净地定义该板材的连接件组合。
- 从admin portal设置槽深公差在admin portal中添加槽深公差,即可调整槽的深度而不改变板材宽度。
- Find the What's New entry in the property panelScroll up in the property panel box on the left to reveal the blue What's New entry, which sits in the same panel as viewport navigation, global preferences and settings.
- 将稳定横杆移动到特定高度用Translate Panel偏移单根横杆,使其位于所需高度,而其他横杆保持均匀间距。
- Place connectors automatically via scenariosSome connectors are placed automatically based on the panel type defined in scenarios.