门
指南:34
- 通过Change Model选项更改门或窗的类型将已放置的门或窗替换为轮播中的其他型号,并调整其尺寸、铰链侧和位置。
- 更改型号、翻转门扇方向/合页,并设置窗台高度放置门或窗后,可在其属性中调整型号、开启方向、合页位置和尺寸。
- 翻转门扇开向和合页,并设置与墙的距离选择已放置的门,翻转其侧边或合页,以更改开启方向和合页位置。
- 配置带内部门板系统属性的滑动门插入滑动机构,并在属性中将门板系统设为内部门板系统,即可创建滑动门。
- 通过门开向翻转门侧、铰链和双向开启通过翻转门侧或铰链,或启用双向开启,控制所选门的开启方式。
- 添加和编辑门,可设置宽度、高度、厚度和墙距在平面图中将门放置在墙上,设置其尺寸和与墙的距离,并更改其型号和材质。
- 设置门的开启方向和双向开启选择门是左开还是右开,并启用双向开启,使门向两侧开启。
- 通过单击尺寸标注调整门窗位置单击门窗的位置尺寸标注并输入新值即可移动它,还可设置窗户的宽度、高度、厚度和标高。
- Change door model, finish and handlePick a door model from the carousel, then set its finish and handle from meshes and materials.
- 通过贯穿墙体厚度进行挤出,创建门窗洞口在墙上为门或窗开洞:绘制切割区域,并将其贯穿墙体厚度挤出。
- 将门窗移动到距墙侧的精确距离将洞口放置在墙的居中位置,然后使用其两侧尺寸设置距任一侧的精确距离。
- 放置门并设置其宽度、厚度、高度和标高在墙上放置门,并在左侧面板中编辑其宽度、厚度和高度。
- 更改门窗型号、宽度、厚度、开启方向和铰链位置选择门或窗,然后使用修改菜单更改其型号、宽度、厚度、开启方向和铰链位置。
- 点击已放置的门以生成其尺寸标注点击已放置的门,自动生成其尺寸标注以供编辑。
- 通过 Shift 行或双击蓝色尺寸值来编辑门尺寸使用 Shift 行移动门,或双击蓝色尺寸值来调整其大小。
- 了解所选门左侧面板上的控件了解所选门左侧面板上每个控件的作用,从尺寸和偏移到翻转面和铰链。
- Add a door to a wallPlace a door on a wall from the Architecture or Home tab and set it up in the Door panel.
- Add finger group details for sliding door top and bottom in hardware adminEdit construction elements and shutter offsets for sliding door top and bottom finger group details.
- Change a door model and position it by editing its dimensionSelect the door tool to see its height, width, thickness and model in the properties bar.
- Edit door and window dimensions, model, and flip hinges from properties tabSelect a door or window and open the properties tab to change its dimensions, floor elevation, and opening direction.
- Fix a shutter door extending past the cabinet bottom edgeCheck the shutter reduction values in Preferences > Cabinet/Wardrobe > Construction > Shutter System to explain a door that extends past the bottom edge.
- Model a pocket door systemModel a pocket door system in the software, noting that its slide animation is not automated.
- Place doors after walls and edit size, height, thickness, hinge and modelAdd doors after your walls are ready, then adjust each door's size, orientation and model so it looks right in 3D.
- Place doors and windows from the floor planAdd doors and windows to built walls from the floor plan, then adjust their dimensions and parameters.
- Set default door, window and wall properties via PreferencesSet default properties for repeated elements so newly added doors, windows, elevations and walls inherit the same values across all rooms.
- 设置门的高度位置,并在门的属性中移动门了解高度位置在门属性面板中的位置、门的标高为什么为零,以及如何沿任一方向移动门。
- Why Flip Sides is greyed out on a two-way doorLearn why Flip Sides cannot be used on a door whose 'Enable 2-way opening' is ticked, while Flip Hinge stays available.
- 将柜体切换为型材拉手或无拉手门板在设计过程中直接更改柜体,从普通拉手改为型材拉手或无拉手门板,无需单独的产品目录或构造设置。
- 核心设计步骤:墙体、门、窗、天花板和瓷砖绘制墙体、添加门、添加窗、添加天花板并添加瓷砖,即可完成设计。
- 将墙体绘制为完整不间断的墙段,并将门放置在墙体中心将每面墙绘制为一段不间断的墙段,并通过捕捉到墙体中心在其上放置门。
- 重新创建错误的天花板,并添加带开启方向的门删除错误的天花板,重新创建一个新的天花板,并在方案中添加门。
- 在添加门窗之前,先设置墙体高度和厚度设置墙体高度和厚度,然后按高度、宽度、厚度和离地高度定义门窗。
- Change wall, door and window properties from the Modify menuAdjust wall dimensions and colours, door and window sizes, window height and elevation, and swap window models from the Modify menu.
- Open and close all shutters on a 3 Door Sliding Shutter systemSlide every door of a 3 Door Sliding Shutter system open or back from the Shutter System panel's Construction tab.