ドア
ガイド:34
- Change Modelオプションでドアまたは窓のタイプを変更する配置済みのドアまたは窓をカルーセルから別のモデルに差し替え、サイズ、開き勝手、位置を調整できます。
- モデルの変更、扉の左右/ヒンジの反転、窓の腰高の設定ドアまたは窓を配置し、プロパティからモデル、開き方向、ヒンジ位置、寸法を調整します。
- ドアの開き方向とヒンジを反転し、壁からの距離を設定する配置済みのドアを選択し、側面またはヒンジを反転して、開く方向とヒンジの位置を変更します。
- 内部シャッターシステムのプロパティで引き戸を設定する引き戸を作成するには、スライド機構を挿入し、プロパティでシャッターシステムを内部シャッターシステムに設定します。
- 扉の向きから、開き側・丁番・両開きを切り替える選択した扉の開き側や丁番を切り替えたり、両開きを有効にしたりして、扉の開き方を制御します。
- 幅、高さ、厚さ、壁からの距離を指定してドアを追加および編集する間取り図の壁にドアを配置し、サイズと壁からの距離を設定して、モデルと素材を変更します。
- ドアの開き方向と両開きの設定ドアを左開きにするか右開きにするかを選択し、両開きを有効にすると両側に開くようになります。
- 寸法をクリックしてドアと窓の配置を調整するドアや窓の配置寸法をクリックして新しい値を入力すると移動できます。また、窓の幅、高さ、厚さ、高さ位置を設定できます。
- 扉のモデル、仕上げ、取っ手を変更するカルーセルから扉のモデルを選び、メッシュとマテリアルから仕上げと取っ手を設定します。
- 壁の厚さを貫通するように押し出して、ドアや窓の切り抜きを作成します壁にドアや窓の開口部を切り抜くには、切り抜く領域を描画し、壁の厚さを貫通するように押し出します。
- ドアや窓を壁側から正確な距離に移動するPlace an opening centered on a wall, then use its side dimensions to set the exact distance from either side.
- ドアを配置し、幅、厚さ、高さ、高さ位置を設定します壁にドアを配置し、左パネルで幅、厚さ、高さを編集します。
- ドア・窓のモデル、幅、厚さ、開き方向、ヒンジ位置を変更するドアまたは窓を選択し、変更メニューでモデル、幅、厚さ、開き方向、ヒンジ位置を変更します。
- 配置したドアをクリックすると、その寸法を生成します配置したドアをクリックすると、編集用の寸法が自動的に生成されます。
- Shift方式または青い数値をダブルクリックして、ドアの寸法を編集しますドアを移動するにはShift行を使用するか、青い寸法値をダブルクリックしてサイズを変更します。
- 選択したドアの左パネルのコントロールを理解するLearn what each control on a selected door's left panel does, from size and shift to flipping sides and hinges.
- Add a door to a wallPlace a door on a wall from the Architecture or Home tab and set it up in the Door panel.
- Add finger group details for sliding door top and bottom in hardware adminEdit construction elements and shutter offsets for sliding door top and bottom finger group details.
- Change a door model and position it by editing its dimensionSelect the door tool to see its height, width, thickness and model in the properties bar.
- Edit door and window dimensions, model, and flip hinges from properties tabSelect a door or window and open the properties tab to change its dimensions, floor elevation, and opening direction.
- Fix a shutter door extending past the cabinet bottom edgeCheck the shutter reduction values in Preferences > Cabinet/Wardrobe > Construction > Shutter System to explain a door that extends past the bottom edge.
- Model a pocket door systemModel a pocket door system in the software, noting that its slide animation is not automated.
- Place doors after walls and edit size, height, thickness, hinge and modelAdd doors after your walls are ready, then adjust each door's size, orientation and model so it looks right in 3D.
- Place doors and windows from the floor planAdd doors and windows to built walls from the floor plan, then adjust their dimensions and parameters.
- Set default door, window and wall properties via PreferencesSet default properties for repeated elements so newly added doors, windows, elevations and walls inherit the same values across all rooms.
- 扉の立面を設定し、プロパティで扉を移動する扉のプロパティパネルのどこに立面があるか、扉の立面がゼロになる理由、扉をどちらかの方向に沿って移動する方法を説明します。
- Why Flip Sides is greyed out on a two-way doorLearn why Flip Sides cannot be used on a door whose 'Enable 2-way opening' is ticked, while Flip Hinge stays available.
- キャビネットをプロファイル取っ手または取っ手なし扉に切り替えるデザイン中にキャビネットを通常の取っ手からプロファイル取っ手または取っ手なし扉へ直接変更できます。別途カタログや構造設定は不要です。
- 基本の設計手順:壁、ドア、窓、天井、タイル壁を描き、ドアを追加し、窓を追加し、天井を追加し、タイルを追加して設計を完了します。
- 壁は途切れない一続きのランとして下書きし、壁の中心にドアを配置します各壁を途切れない一続きのランとして描き、壁の中心にスナップしてその上にドアを配置します。
- Recreate a wrong ceiling and add doors with opening directionDelete an incorrect ceiling, create a fresh one, and add doors to your plan.
- ドアと窓を追加する前に、壁の高さと厚さを設定します壁の高さと厚さを設定し、次に高さ、幅、厚さ、高さ位置でドアと窓を定義します。
- Change wall, door and window properties from the Modify menuAdjust wall dimensions and colours, door and window sizes, window height and elevation, and swap window models from the Modify menu.
- Open and close all shutters on a 3 Door Sliding Shutter systemSlide every door of a 3 Door Sliding Shutter system open or back from the Shutter System panel's Construction tab.