ଦ୍ୱାରଗୁଡ଼ିକ
ଗାଇଡ୍: 34
- Change Model ବିକଳ୍ପ ମାଧ୍ୟମରେ ଦ୍ୱାର କିମ୍ବା ୱିଣ୍ଡୋ ପ୍ରକାର ପରିବର୍ତ୍ତନ କରନ୍ତୁସ୍ଥାପିତ ଦ୍ୱାର କିମ୍ବା ୱିଣ୍ଡୋକୁ କାରୋସେଲରୁ ଅନ୍ୟ ମଡେଲ ସହିତ ବଦଳାନ୍ତୁ ଏବଂ ଏହାର ଆକାର, ହିଞ୍ଜ ପାର୍ଶ୍ୱ ଓ ସ୍ଥିତି ସମାୟୋଜନ କରନ୍ତୁ।
- ମଡେଲ ବଦଳାନ୍ତୁ, ଦ୍ୱାରର ପାର୍ଶ୍ୱ/ହିଞ୍ଜ ଫ୍ଲିପ କରନ୍ତୁ ଏବଂ ୱିଣ୍ଡୋ ସିଲ୍ ଉଚ୍ଚତା ସେଟ୍ କରନ୍ତୁଏକ ଦ୍ୱାର କିମ୍ବା ୱିଣ୍ଡୋ ରଖନ୍ତୁ, ତାପରେ ଏହାର ପ୍ରପର୍ଟିରୁ ଏହାର ମଡେଲ, ଖୋଲିବା ଦିଶା, ହିଞ୍ଜ ସ୍ଥିତି ଏବଂ ମାପ ସଜାଡ଼ନ୍ତୁ।
- ଦ୍ୱାରର ସ୍ୱିଙ୍ଗ୍ ଓ ହିଞ୍ଜ୍ ଫ୍ଲିପ୍ କରନ୍ତୁ, ଏବଂ କାନ୍ଥରୁ ଦୂରତା ସେଟ୍ କରନ୍ତୁଏକ ସ୍ଥାପିତ ଦ୍ୱାର ଚୟନ କରନ୍ତୁ ଏବଂ ଏହାର କେଉଁ ଆଡ଼କୁ ଖୁଲିବ ଓ କେଉଁଠି ହିଞ୍ଜ୍ ରହିବ ତାହା ପରିବର୍ତ୍ତନ କରିବା ପାଇଁ ଏହାର ପାର୍ଶ୍ୱ କିମ୍ବା ହିଞ୍ଜ୍ ଫ୍ଲିପ୍ କରନ୍ତୁ।
- ଆଭ୍ୟନ୍ତରୀଣ ଶଟର ସିଷ୍ଟମ ଗୁଣଧର୍ମ ସହିତ ଏକ ସ୍ଲାଇଡିଂ ଦ୍ୱାର ବିନ୍ୟାସ କରନ୍ତୁଏକ ସ୍ଲାଇଡିଂ ଦ୍ୱାର ତିଆରି କରିବାକୁ, ସ୍ଲାଇଡିଂ ମେକାନିଜିମ ଯୋଡ଼ନ୍ତୁ ଏବଂ ଗୁଣଧର୍ମରେ ଶଟର ସିଷ୍ଟମକୁ ଆଭ୍ୟନ୍ତରୀଣ ଶଟର ସିଷ୍ଟମ ଭାବରେ ସେଟ କରନ୍ତୁ।
- ଦ୍ୱାର ଦିଗରୁ ଦ୍ୱାର ପାର୍ଶ୍ୱ, ହିଞ୍ଜ ଏବଂ ଦୁଇମୁହାଁ ଖୋଲିବା ଫ୍ଲିପ୍ କରନ୍ତୁଏକ ଚୟନିତ ଦ୍ୱାରର ପାର୍ଶ୍ୱ କିମ୍ବା ହିଞ୍ଜ ଫ୍ଲିପ୍ କରି, କିମ୍ବା ଦୁଇମୁହାଁ ଖୋଲିବା ସକ୍ଷମ କରି ଏହା କିପରି ଖୋଲିବ ତାହା ନିୟନ୍ତ୍ରଣ କରନ୍ତୁ।
- ପ୍ରସ୍ଥ, ଉଚ୍ଚତା, ମୋଟେଇ ଏବଂ କାନ୍ଥ ଦୂରତା ସହିତ ଦ୍ୱାର ଯୋଡ଼ନ୍ତୁ ଏବଂ ସମ୍ପାଦନ କରନ୍ତୁଫ୍ଲୋର ପ୍ଲାନରେ ଏକ କାନ୍ଥ ଉପରେ ଏକ ଦ୍ୱାର ରଖନ୍ତୁ, ଏହାର ଆକାର ଏବଂ କାନ୍ଥରୁ ଦୂରତା ସେଟ୍ କରନ୍ତୁ, ଏବଂ ଏହାର ମଡେଲ ଏବଂ ସାମଗ୍ରୀ ପରିବର୍ତ୍ତନ କରନ୍ତୁ।
- ଦ୍ୱାରର ଖୋଲିବା ଦିଶା ଏବଂ ଦୁଇପଟୁ ଖୋଲିବା ସେଟ୍ କରନ୍ତୁଦ୍ୱାର ବାମପଟୁ ଖୋଲିବ କି ଡାହାଣପଟୁ ଖୋଲିବ ତାହା ବାଛନ୍ତୁ, ଏବଂ ଦୁଇପଟୁ ଖୋଲିବା ସକ୍ଷମ କରନ୍ତୁ ଯାହାଫଳରେ ଏହା ଉଭୟ ପଟୁ ଖୋଲିବ।
- ଡାଇମେନ୍ସନ୍ ଉପରେ କ୍ଲିକ୍ କରି ଦ୍ୱାର ଓ ୱିଣ୍ଡୋର ସ୍ଥାନ ଆଡଜଷ୍ଟ କରନ୍ତୁଦ୍ୱାର କିମ୍ବା ୱିଣ୍ଡୋର ସ୍ଥାନ ଡାଇମେନ୍ସନ୍ ଉପରେ କ୍ଲିକ୍ କରି ନୂଆ ମୂଲ୍ୟ ଟାଇପ୍ କରନ୍ତୁ, ଏହାଦ୍ୱାରା ଏହା ସ୍ଥାନାନ୍ତରିତ ହେବ, ଏବଂ ୱିଣ୍ଡୋର ପ୍ରସ୍ଥ, ଉଚ୍ଚତା, ମୋଟେଇ ଓ ଉଚ୍ଚତା ସ୍ତର ସେଟ୍ କରନ୍ତୁ।
- ଦ୍ୱାର ମଡେଲ, ଫିନିଶ ଏବଂ ହ୍ୟାଣ୍ଡେଲ ବଦଳାନ୍ତୁକାରୋସେଲରୁ ଏକ ଦ୍ୱାର ମଡେଲ ବାଛନ୍ତୁ, ତାପରେ ମେଶେସ ଏବଂ ମ୍ୟାଟେରିଆଲ୍ସରୁ ଏହାର ଫିନିଶ ଏବଂ ହ୍ୟାଣ୍ଡେଲ ସେଟ କରନ୍ତୁ।
- କାନ୍ଥର ମୋଟେଇ ଦେଇ ଏକ୍ସଟ୍ରୁଡ୍ କରି ଦ୍ୱାର କିମ୍ବା ଝରକା କଟଆଉଟ୍ ସୃଷ୍ଟି କରନ୍ତୁକଟ୍ କ୍ଷେତ୍ର ଆଙ୍କି ଏବଂ ତାହାକୁ କାନ୍ଥର ମୋଟେଇ ଦେଇ ଏକ୍ସଟ୍ରୁଡ୍ କରି କାନ୍ଥରେ ଏକ ଦ୍ୱାର କିମ୍ବା ଝରକା ପାଇଁ ଖୋଲା ସ୍ଥାନ କାଟନ୍ତୁ।
- ଦ୍ୱାର କିମ୍ବା ଝରକାକୁ କାନ୍ଥ ପାର୍ଶ୍ୱରୁ ସଠିକ୍ ଦୂରତାକୁ ଘୁଞ୍ଚାନ୍ତୁଏକ ଖୋଲିବାକୁ କାନ୍ଥ ଉପରେ କେନ୍ଦ୍ରିତ ଭାବରେ ରଖନ୍ତୁ, ତାପରେ ଏହାର ପାର୍ଶ୍ୱ ମାପ ବ୍ୟବହାର କରି ଯେକୌଣସି ପାର୍ଶ୍ୱରୁ ସଠିକ୍ ଦୂରତା ନିର୍ଦ୍ଧାରଣ କରନ୍ତୁ।
- ଏକ ଦ୍ୱାର ରଖନ୍ତୁ ଏବଂ ଏହାର ଓସାର, ମୋଟେଇ, ଉଚ୍ଚତା ଓ ଉଚ୍ଚତା ସ୍ତର ସେଟ୍ କରନ୍ତୁଏକ କାନ୍ଥରେ ଏକ ଦ୍ୱାର ରଖନ୍ତୁ ଏବଂ ବାମ ପ୍ୟାନେଲରେ ଏହାର ଓସାର, ମୋଟେଇ ଓ ଉଚ୍ଚତା ସମ୍ପାଦନ କରନ୍ତୁ।
- ଦ୍ୱାର/ଝରକା ମଡେଲ, ଚଉଡ଼ା, ମୋଟେଇ, ଫ୍ଲିପ୍ ସାଇଡ୍ ଏବଂ ହିଞ୍ଜ ବଦଳାନ୍ତୁଏକ ଦ୍ୱାର କିମ୍ବା ଝରକା ଚୟନ କରନ୍ତୁ ଏବଂ ଏହାର ମଡେଲ, ଚଉଡ଼ା, ମୋଟେଇ, ଖୋଲିବା ପାଖ ଏବଂ ହିଞ୍ଜ ସ୍ଥିତି ବଦଳାଇବା ପାଇଁ modify ମେନୁ ବ୍ୟବହାର କରନ୍ତୁ।
- ଏକ ସ୍ଥାପିତ ଦ୍ୱାର ଉପରେ କ୍ଲିକ୍ କରି ଏହାର ମାପ ତିଆରି କରନ୍ତୁସମ୍ପାଦନା ପାଇଁ ଏକ ସ୍ଥାପିତ ଦ୍ୱାର ଉପରେ କ୍ଲିକ୍ କରନ୍ତୁ, ଏହାର ମାପ ସ୍ୱଚାଳିତ ଭାବେ ତିଆରି ହେବ।
- Edit door dimensions by shift method or double-clicking the blue valueMove a door with its Shift row or double-click the blue dimension value to resize it.
- ଏକ ଚୟନିତ ଦ୍ୱାରର ବାମ ପ୍ୟାନେଲରେ ଥିବା ନିୟନ୍ତ୍ରଣଗୁଡ଼ିକୁ ବୁଝନ୍ତୁLearn what each control on a selected door's left panel does, from size and shift to flipping sides and hinges.
- Add a door to a wallPlace a door on a wall from the Architecture or Home tab and set it up in the Door panel.
- Add finger group details for sliding door top and bottom in hardware adminEdit construction elements and shutter offsets for sliding door top and bottom finger group details.
- Change a door model and position it by editing its dimensionSelect the door tool to see its height, width, thickness and model in the properties bar.
- Edit door and window dimensions, model, and flip hinges from properties tabSelect a door or window and open the properties tab to change its dimensions, floor elevation, and opening direction.
- Fix a shutter door extending past the cabinet bottom edgeCheck the shutter reduction values in Preferences > Cabinet/Wardrobe > Construction > Shutter System to explain a door that extends past the bottom edge.
- Model a pocket door systemModel a pocket door system in the software, noting that its slide animation is not automated.
- Place doors after walls and edit size, height, thickness, hinge and modelAdd doors after your walls are ready, then adjust each door's size, orientation and model so it looks right in 3D.
- Place doors and windows from the floor planAdd doors and windows to built walls from the floor plan, then adjust their dimensions and parameters.
- Set default door, window and wall properties via PreferencesSet default properties for repeated elements so newly added doors, windows, elevations and walls inherit the same values across all rooms.
- Set door elevation and shift a door in its propertiesLearn where elevation sits in the door properties panel, why a door's elevation is zero, and how to shift the door along either direction.
- Why Flip Sides is greyed out on a two-way doorLearn why Flip Sides cannot be used on a door whose 'Enable 2-way opening' is ticked, while Flip Hinge stays available.
- କ୍ୟାବିନେଟକୁ ପ୍ରୋଫାଇଲ ହ୍ୟାଣ୍ଡେଲ କିମ୍ବା ହ୍ୟାଣ୍ଡେଲବିହୀନ ଦ୍ୱାରକୁ ବଦଳାନ୍ତୁଡିଜାଇନ ସମୟରେ ସିଧାସଳଖ କ୍ୟାବିନେଟକୁ ସାଧାରଣ ହ୍ୟାଣ୍ଡେଲରୁ ପ୍ରୋଫାଇଲ ହ୍ୟାଣ୍ଡେଲ କିମ୍ବା ହ୍ୟାଣ୍ଡେଲବିହୀନ ଦ୍ୱାରକୁ ବଦଳାନ୍ତୁ, ଅଲଗା କାଟାଲଗ କିମ୍ବା କନଷ୍ଟ୍ରକସନ ସେଟଅପ ଆବଶ୍ୟକ ନାହିଁ।
- ମୂଳ ଡିଜାଇନ୍ ପଦକ୍ଷେପ: କାନ୍ଥ, ଦ୍ୱାର, ଝରକା, ଛାତ ଏବଂ ଟାଇଲିଂଏକ ଡିଜାଇନ୍ ସମ୍ପୂର୍ଣ୍ଣ କରିବା ପାଇଁ କାନ୍ଥ ଆଙ୍କନ୍ତୁ, ଦ୍ୱାର ଯୋଡ଼ନ୍ତୁ, ଝରକା ଯୋଡ଼ନ୍ତୁ, ଛାତ ଯୋଡ଼ନ୍ତୁ ଏବଂ ଟାଇଲିଂ ଯୋଡ଼ନ୍ତୁ।
- ସମ୍ପୂର୍ଣ୍ଣ ଅବିଚ୍ଛିନ୍ନ ରନ୍ ଭାବରେ କାନ୍ଥ ଡ୍ରାଫ୍ଟ କରନ୍ତୁ ଏବଂ କାନ୍ଥ କେନ୍ଦ୍ରରେ ଦ୍ୱାର ରଖନ୍ତୁପ୍ରତ୍ୟେକ କାନ୍ଥକୁ ଏକ ଅବିଚ୍ଛିନ୍ନ ରନ୍ ଭାବରେ ଆଙ୍କନ୍ତୁ ଏବଂ କାନ୍ଥ କେନ୍ଦ୍ରକୁ ସ୍ନାପ୍ କରି ତା ଉପରେ ଦ୍ୱାର ରଖନ୍ତୁ।
- ଭୁଲ ଛାତ ପୁନଃ ତିଆରି କରନ୍ତୁ ଏବଂ ଖୋଲିବା ଦିଶା ସହିତ ଦ୍ୱାର ଯୋଡ଼ନ୍ତୁଭୁଲ ଛାତ ଡିଲିଟ କରନ୍ତୁ, ନୂଆ ଛାତ ତିଆରି କରନ୍ତୁ, ଏବଂ ଆପଣଙ୍କ ପ୍ଲାନରେ ଦ୍ୱାର ଯୋଡ଼ନ୍ତୁ।
- Set wall height and thickness before adding doors and windowsSet the wall height and thickness, then define doors and windows by their height, width, thickness and elevation.
- Change wall, door and window properties from the Modify menuAdjust wall dimensions and colours, door and window sizes, window height and elevation, and swap window models from the Modify menu.
- Open and close all shutters on a 3 Door Sliding Shutter systemSlide every door of a 3 Door Sliding Shutter system open or back from the Shutter System panel's Construction tab.