Create a groove set to cut and include it in CAM for pocketing

Machine a pocket on a shutter by creating a groove set, setting it to cut at the required depth and including it in CAM for pocketing.

1. To machine a pocket on a shutter, create the groove set and set it to cut at the required depth (for example 10 mm), then include it in CAM for pocketing so the whole pocket is engraved.

   ✓ 2026 ഒക്‌ടോബർ 11-ന് പ്രോഡക്റ്റിൽ പരിശോധിച്ചു