Create a groove set to cut and include it in CAM for pocketing

Machine a pocket on a shutter by creating a groove set, setting it to cut at the required depth and including it in CAM for pocketing.

1. To machine a pocket on a shutter, create the groove set and set it to cut at the required depth (for example 10 mm), then include it in CAM for pocketing so the whole pocket is engraved.

   ✓ 11 அக்டோபர், 2026 அன்று தயாரிப்பில் சரிபார்க்கப்பட்டது