시트 및 시트 설정
가이드: 94
- 디자인에서 프레젠테이션 자동 생성자동 생성을 사용하면 디자인의 모든 뷰를 만들고 유닛, 요소 시트, 자재를 목록으로 정리해 줍니다.
- 뷰, 도면 시트, 이미지, 일람표로 프레젠테이션을 작성하세요생성된 뷰, 사용자 지정 시트, 업로드한 이미지, 가져온 일람표로 프레젠테이션을 구성하세요.
- 생성된 시트 편집 및 정리생성된 시트를 일반 프레젠테이션 시트처럼 취급하여 한 단계로 편집, 삭제 및 실행 취소할 수 있습니다.
- 미리 만들어진 템플릿으로 프레젠테이션 시트 추가카탈로그에서 템플릿을 선택하여 프레젠테이션 시트를 추가하거나, 직접 템플릿을 만들어 프로젝트와 시트 전반에서 재사용할 수 있습니다.
- 템플릿 또는 사용자 지정 레이아웃에서 프레젠테이션 시트 만들기뷰, 텍스트, 선, 이미지, 나침반, 표, 목록표, 단면선을 추가하여 프레젠테이션 시트를 만든 다음 자르기, 축척 조정, 정리를 하십시오.
- 수동 프레젠테이션으로 프레젠테이션 편집 방식 익히기자동으로 생성되는 프레젠테이션을 수정하는 방법을 익히려면 수동 프레젠테이션을 한두 번 만들어 보세요.
- 입면 도면에 유닛 코드 인쇄프레젠테이션 템플릿의 입면 설정에서 Unit annotations 설정을 켜면 C12, C13과 같은 유닛 코드가 입면에 인쇄됩니다.
- 자동 생성된 프레젠테이션 시트 검토 및 편집자동 생성된 프레젠테이션이 만들어지면 공유하기 전에 각 생성된 시트를 일반 프레젠테이션 시트처럼 검토하고 편집하며 제목, 텍스트, 치수를 추가하세요.
- Infernia가 프레젠테이션 출력을 자동 생성하는 방법디자인이 완료되면 Infernia가 프레젠테이션 뷰를 생성하므로, 프레젠테이션을 열고 원하는 사용자 지정만 추가하면 됩니다.
- 프레젠테이션 시트에 자동 생성 치수 켜기자동 프레젠테이션 템플릿에서 시트 유형별로 자동 생성 치수를 제어하여 각 시트가 원하는 치수로 인쇄되도록 하세요.
- 같은 벽의 내부 및 외부 입면을 프레젠테이션에 추가이름을 바꾼 두 개의 입면을 만들고, 내부 입면을 스켈레톤 모드로 전환하고, 뷰를 시트에 추가하여 한 벽의 양면을 프레젠테이션에 표시합니다.
- 프레젠테이션 시트 추가, 순서 변경 및 삭제템플릿 또는 빈 시트를 추가하고, 뷰와 이미지를 배치하고, 복잡한 시트를 분할하여 프레젠테이션 덱을 구성하세요.
- 뷰를 잠그고 시트에 추가하여 프레젠테이션을 만드세요뷰별 레이어를 관리하고 자동 생성 프레젠테이션 옵션을 사용하여 빠른 초안을 만든 뒤 다듬으세요.
- 카탈로그 템플릿으로 프레젠테이션을 만들고 뷰 추가하기카탈로그 템플릿으로 프레젠테이션을 만들고, 자동 생성으로 뷰를 가져오며, 게시된 시트 선의 겹침을 확인합니다.
- 도구 모음에서 프레젠테이션을 PDF로 내보내기프레젠테이션을 PDF로 다운로드하고 포함할 시트를 선택하세요.
- 자체 제목이 있는 프레젠테이션 시트 생성자동 프레젠테이션은 생성된 각 시트에 자체 제목을 부여하므로, 하부장 평면 시트와 벽면장 평면 시트는 별도로 제목이 지정됩니다.
- Get wall elevation sheets from Auto presentationPlace units against a wall so Auto presentation creates wall elevation sheets with dimensioned drawings, material tables and a title block.
- 템플릿을 조정한 후 프레젠테이션을 다시 생성하세요템플릿을 조정하고 다시 생성하세요. 그러면 업데이트된 템플릿이 이후 덱의 기본값이 됩니다.
- 프레젠테이션 간 시트 서식 재사용치수 기입과 서식을 매번 다시 하지 않도록 시트 레이아웃을 미리 템플릿으로 준비하세요.
- 회사 프레젠테이션 형식을 템플릿으로 저장Infurnia에서 회사의 고객용 프레젠테이션 형식을 재현하고 프레젠테이션용 템플릿으로 저장하세요.
- 페이지 크기, 테두리, 템플릿으로 프레젠테이션 시트 설정올바른 페이지 크기, 표제란, 그래픽으로 프레젠테이션 시트를 배치한 다음, 재사용 가능한 템플릿으로 저장하고 게시하세요.
- 프레젠테이션 도구를 사용하여 프레젠테이션을 자동으로 생성하세요프레젠테이션 도구로 공유된 프레젠테이션을 검토하면 직접 프레젠테이션을 만드는 수동 단계를 건너뛸 수 있습니다.
- 찾기 및 바꾸기 태그로 프레젠테이션 표제란 필드 자동 채우기프레젠테이션 템플릿에서 찾기 및 바꾸기 태그를 사용하면 프로젝트 및 디자인 기록에서 표제란 필드가 자동으로 채워집니다.
- 자동 프레젠테이션 대신 프레젠테이션 보드를 수동으로 작성기본 자동 프레젠테이션에 의존하지 않고 프레젠테이션 보드를 직접 만들어 이름 지정 및 유사한 주석을 직접 추가하세요.
- Enter View로 프레젠테이션에서 선택한 도면 편집프레젠테이션에서 도면을 선택하고 Enter View로 열면 변경 사항이 프레젠테이션 입면도에 다시 반영됩니다.
- 프레젠테이션 시트에 고객, 프로젝트 및 리비전 세부 정보를 입력하세요프레젠테이션 시트에 고객 이름, 고객 세부 정보, 리비전 번호, 프로젝트 제목, 프로젝트 유형 및 디자이너 이름을 입력한 다음, 게시하기 전에 필요에 따라 수정하세요.
- Show concealed edges로 프레젠테이션 결함 수정디자인이 DESIGN에서는 올바르게 보이지만 PRESENTATION에서 결함이 나타나면 속성 패널에서 Show concealed edges를 끄세요.
- 하나의 디자인에서 여러 프레젠테이션 유지이전 프레젠테이션을 잃지 않고 새 프레젠테이션을 생성하고, 내비게이션 바에서 전환하며, 원하면 실별로 나눌 수 있습니다.
- 콘텐츠를 추가하기 전에 프레젠테이션 도구를 열고 페이지 크기를 설정하세요프레젠테이션 도구를 열고 시트 또는 템플릿을 선택한 뒤, 콘텐츠를 추가하기 전에 설정에서 페이지 크기를 설정하세요.
- 벡터 도면과 래스터 3D 뷰를 사용하여 시트를 PDF로 인쇄현재 시트 또는 모든 시트를 PDF로 인쇄하고 어떤 콘텐츠가 벡터로 유지되고 어떤 콘텐츠가 포함된 이미지가 되는지 확인합니다.
- 프레젠테이션 시트에 표시되는 내용 이해하기입면도와 치수가 표기된 평면도부터 3D 뷰, 자재 사양, 액세서리 상세까지 각 프레젠테이션 시트에 표시되는 내용을 알아보세요.
- Add a border to a sheetTurn on Add Border and set its thickness and colour under the sheet's Sheet Margin settings.
- Auto-fill names and dates across sheets with parameters and Find & ReplaceSwap a parameter value across many sheets at once by finding its formula and replacing it everywhere.
- Change sheet scale from the left panelChange the scale of a sheet from the left-side panel of the sheet.
- 프레젠테이션에서 동적 컴포넌트를 정적으로 변환디자인이 확정된 후 동적 컴포넌트를 일반 시트 객체로 고정하세요. 이 변경은 되돌릴 수 없습니다.
- Create and switch between presentationsUse the presentation dropdown in the navigation bar to create a new presentation and to switch back to an earlier one.
- Get new units and walls into an existing presentationRegenerate so walls that received units get elevation pages and added units appear in the plans and unit listing.
- 프레젠테이션 시트 보기에서 디자인 보기로 돌아가기프레젠테이션 시트의 보기에서 View Properties를 열고, 이름 옆의 화살표 버튼을 사용하여 디자인 내 해당 보기로 바로 이동하세요.
- Layer objects on a sheet with the z-order ladderLearn how each sheet section keeps one z-order ladder, where new objects land, and how to move an object one layer at a time.
- Name presentation sheets and presentationsGive each sheet a text label and each presentation a name so project phases and work scopes are easy to identify.
- Place a unit listing on an elevation sheetAdd a unit listing, scope it to an elevation, pick its columns and place it on the sheet.
- 프레젠테이션을 생성하기 전에 사용자 지정 레이어를 준비하세요뷰별로 레이어를 숨기거나 표시하기 전에 사용자 지정 레이어를 만들고 유닛을 해당 레이어로 이동하세요.
- Set margins and the margin guide on a sheetOpen a sheet's settings block and set its margins and grey margin guide.
- Set page size and orientation for the whole presentationSet Page Size and Orientation under Presentation Settings so they apply to the whole presentation rather than to a single sheet.
- Set presentation-wide and per-sheet presentation settingsOpen Presentation Settings to set the name, sheet size and scaling for the whole presentation, then give each sheet its own margins and border.
- Split a sheet or section into sub-areas with section linesDraw section lines to divide a sheet or section into independent sub-areas and see how existing objects are reassigned to each side.
- Turn sheet entries on or off in the presentation templateSwitch the key plan, ceiling plan, room schedule, 3D view, plans and elevations on or off to match the project.
- Understand why auto-generated presentations miss sheetsSee that the Auto-generate wizard only emits the sheets listed in the presentation template it uses.
- Update content across all sheets with Find and ReplaceCopy the existing content, open the Find and Replace tool and enter the replacement text to update every sheet at once.
- 사용자 지정 시트를 프레젠테이션 템플릿으로 게시빈 템플릿에서 재사용 가능한 프레젠테이션 템플릿을 만들어 게시하면 시트 디자이너가 이를 자동으로 적용할 수 있습니다.
- 프레젠테이션 시트에 디자인 뷰 추가각 디자인 뷰를 프레젠테이션 시트에 추가하고 Presentation을 열어 확인하고 제어하세요.
- 프레젠테이션에 자재, 도어, 몸체, 손잡이 일람표 추가프레젠테이션에 자재 및 수납장 일람표를 삽입하고 디자인의 자재와 단위를 가져와 각 실과 입면이 도면에 표시되도록 합니다.
- 사용자 지정 입면도를 만들고 잠긴 뷰를 프레젠테이션 시트에 추가하세요캐비닛에서 사용자 지정 입면도를 만들고 프레젠테이션 시트에 리치 뷰와 내부 입면도를 활성화하세요.
- 자체 로고와 도면 시트로 프레젠테이션 템플릿을 사용자 지정하고 게시하세요기존 프레젠테이션 템플릿을 편집하고, 로고를 교체하고, 세부 정보와 도면 시트를 추가한 다음, 사용할 수 있도록 게시하세요.
- 한 번에 하나의 재료씩 도면 시트에 재료 일람표와 범례 추가각 재료를 하나씩 추가하여 도면 시트에 재료 일람표와 범례를 표시하거나, 선 및 텍스트 도구로 동일한 범례를 직접 작성할 수 있습니다.
- 프레젠테이션 시트에 저장된 뷰 추가평면도와 같은 저장된 뷰를 프레젠테이션 시트에 배치한 다음 자르기, 크기 조정 및 세부 정보를 추가하세요.
- 프레젠테이션 시트에 뷰, 이미지, 텍스트 추가뷰, 선, 이미지, 텍스트를 추가하여 프레젠테이션 시트를 만들고 템플릿으로 배치하세요.
- 시트 생성 항목에 시트 템플릿 할당항목에 자체 템플릿을 지정하면 생성된 프레젠테이션이 이를 자동으로 사용합니다.
- 3D 장면 뷰를 잠그고 고객 공유용으로 시트를 PDF로 내보내기잠긴 스케치 장면을 설정하고, 평면도와 입면이 포함된 프레젠테이션 시트를 만들고, 고객 프레젠테이션용으로 유닛 목록 세부 정보와 패널 자재를 가져옵니다.
- 프레젠테이션 템플릿을 저장하고 도면 생성 항목을 정렬합니다템플릿 편집기에서 프레젠테이션 템플릿을 저장하고, 각각 고유한 필수 세부 정보가 있는 도면 생성 항목을 정렬합니다.
- 치수 지정을 위해 뷰 잠금을 해제한 다음 프레젠테이션에서 축척과 자르기를 설정하세요.자동으로 업데이트되도록 프레젠테이션에 뷰를 추가하세요.
- 설정에서 프레젠테이션 시트에 디자인 뷰 추가대상 시트나 템플릿에 디자인 뷰를 추가한 다음 자르기, 주석 달기, 레이블 지정을 수행하세요.
- 도면 시트 항목에 시트 템플릿 지정도면 시트 항목마다 시트 템플릿을 선택하고 기본 표지 페이지 템플릿을 설정하세요.
- 프레젠테이션에 추가하기 전에 뷰를 생성하고 잠그세요각 입면도마다 뷰를 생성하고 상태를 유지하도록 잠근 뒤, 고객용 출력을 위해 프레젠테이션에 추가하세요.
- 프레젠테이션에 벽면 입면도를 포함하세요해당 설정 패널을 열고 아래로 스크롤한 후 벽면 입면도 옵션을 선택하여 프레젠테이션에 뷰를 추가하세요.
- 디자인 뷰를 잠그고 프레젠테이션 시트에 추가잠긴 디자인 뷰를 프레젠테이션 시트에 배치하면 프레젠테이션에서 축척을 다시 조정할 수 있습니다.
- 시트를 카탈로그 템플릿으로 게시시트를 게시하여 새 템플릿을 만들거나 기존 템플릿을 업데이트합니다. 템플릿은 모델 번호와 함께 디비전, 카테고리, 하위 카테고리, 그룹 아래에 분류되며 조직의 모든 구성원이 사용할 수 있습니다.
- 시트를 템플릿으로 게시현재 있는 시트만 템플릿으로 게시한 다음, 카탈로그에서 다른 시트에 재사용할 수 있습니다.
- 현재 시트에 잠긴 설계 뷰 추가Views > Add to current sheet로 현재 시트에 설계 뷰를 배치한 다음, 뷰포트의 왼쪽 패널에서 축척을 조정하세요.
- Add a material image to a presentation sheetPlace an image of a material used in the design onto a presentation sheet, then crop or scale it.
- 화면 하단에서 프레젠테이션에 뷰 추가뷰의 설정 또는 도구 모음의 Outputs 탭에서 한 번에 하나의 뷰를 프레젠테이션에 배치합니다.
- Add and edit a table on a presentation boardAdd a table to a board and use its spreadsheet-like row, column, delete and merge options to build it out.
- Add and resize text boxes on presentation sheets like PowerPointAdd a text box on a presentation sheet, type a caption, and change its font size from the text properties in millimetres.
- Add any created view to a PresentationAdd any view you have created in the design to a Presentation so you can produce output for showing designs to a client.
- Add external images and spreadsheet-like tables to a presentationLearn how external images can be added, cropped, scaled and annotated, and how tables behave like a spreadsheet.
- Add text, arrows, images and material swatches to presentation sheetsAdd arrows with a specified arrow size to a presentation sheet.
- 프레젠테이션 시트에 텍스트, 선, 이미지 및 치수 추가텍스트, 선, 이미지, 치수, 라벨이 지정된 렌더 및 재료를 추가하여 프레젠테이션 시트에 주석을 달거나 시트 형식을 작성할 수 있습니다.
- Build a custom template from a blank sheetStart from a blank sheet, set the page size and orientation, then add a border, lines, images and text boxes and save the layout as a template.
- Choose a sheet template when adding a sheet in presentation modeAdd a sheet in presentation mode by picking a Blank Page or a drawing-and-table layout, or by choosing a template from your organisation's catalogue.
- Control PDF layout output with view lock and add to PDF sheetControl what goes into the downloadable layout by locking views and adding them to the PDF sheet.
- Find and replace text across all sheets in presentation modeOpen the Find panel to search every sheet of a presentation and replace matched text.
- How design views on presentation sheets are lockedLearn what happens when you add a design view to a presentation sheet and why the view is locked.
- 스프레드시트처럼 프레젠테이션 시트에 표와 이미지를 삽입합니다프레젠테이션 시트에 표를 배치하고 셀과 열의 서식을 지정하며, 셀에 이미지를 삽입합니다.
- 프레젠테이션 모드에서 뷰 선택 및 배치Home > Views에서 Select a view를 열고 원하는 뷰를 선택한 뒤 현재 시트에 배치하세요.
- 프레젠테이션 시트에 표 배치 및 편집프레젠테이션 시트에 3 x 3 표를 배치한 다음, 선택한 셀의 패널에서 셀, 행, 열을 편집합니다.
- Place and position a view on a presentation sheetAdd a view to a presentation sheet as a viewport, move it into place, and zoom the sheet with the mouse wheel.
- 고객 공유를 더 명확하게 하려면 모든 시트를 PDF로 게시하세요모든 프레젠테이션 시트를 PDF로 인쇄하여 확인하고 고객과 직접 공유할 수 있습니다.
- Set schedule templates and sheet layouts in Automatic PresentationAssign a template per sheet type and understand the pre-set layout of elevation and schedule sheets.
- Split a long schedule across sheets using copies and filtersSplit a schedule that is too long for one page across several sheets by copying it and filtering each copy to the units it should show.
- View Properties에서 시트의 뷰를 전환하거나 추가하기시트를 복제하고 뷰를 변경하며, View Properties에서 뷰 유형을 전환하고, 벽이 네 개를 초과하는 방에는 추가 뷰를 추가합니다.
- 프레젠테이션 시트 뷰포트에서 View Properties 사용뷰포트를 다른 저장된 뷰로 전환하고, 디자인에서 뷰를 열고, 시트에 있는 뷰의 잠금을 해제합니다.
- Use ready view types and find-and-replace in presentationPick a ready view type from the dropdown and change text across matches with find and replace.
다른 가이드 2
모두 보기 (2)
- Control shutter direction and annotations on an elevationSet the Shutter Direction and annotation options on an elevation's properties panel so the presentation output shows only what you want.
- Import a unit listing with model, depth, height and widthBring a unit listing into a presentation sheet so each unit's model number, depth, height and width populate automatically.