방
가이드: 49
- Create a room and copy its tiling, flooring and ceiling to other roomsAdd a room on the floor plan, finish it with tiles and ceiling finishes, then copy-paste its elements into other rooms to reuse the setup.
- 올바른 가구가 표시되도록 방의 이름과 유형을 설정하세요각 방의 이름을 지정하고 유형을 설정하면 Insert > Furnish에 해당 방에 맞는 가구와 액세서리만 표시됩니다.
- Set room dimensions from center or inner walls and pick room typeSwitch room dimensions to inner-wall measurements and choose a room type so Insert and Furnish only offers matching furniture and accessories.
- 벽, 개구부, 천장, 타일을 순서대로 추가하여 방을 만드세요벽을 완전히 닫으면 천장 도구가 방 영역을 감지하고 천장을 자동으로 측정합니다. 그런 다음 3D에서 방을 보고 편집하세요.
- 모든 벽을 하나의 고리로 닫아 방을 생성하세요경계선이 겹치지 않도록 모든 벽 세그먼트를 완전히 닫힌 고리로 닫으면 소프트웨어가 방을 자동으로 생성합니다.
- 템플릿으로 방을 만들고 이름과 유형을 설정하세요방 템플릿으로 새 디자인을 시작한 다음 방 이름을 바꾸고 유형을 설정하세요.
- Align dimension으로 가장자리에서 가장자리까지 측정하여 방마다 치수를 추가하세요Align dimension으로 한 번에 한 방씩 치수를 추가하세요. 이 도구는 가장자리에서 가장자리까지 측정하며, 치수는 선택한 레이어에 배치됩니다.
- Apply flooring to a room and add an RCC slab using the slab toolChange the flooring pattern or material of a room afterwards.
- Create and edit rooms from enclosed wallsEnclose four walls to get an automatic floor and room text, then rename the room and change its text properties.
- Create rooms so they appear in the room listCreate a room space for each room so it appears in the room list and the room picker.
- Customise room annotation text and show or hide room areaEdit the room annotation label from its settings, change its font size and font type, and show or hide elements such as the room area.
- Enter a room from the top navigation bar room selectorPick a room in the room selector next to the ground-level control to enter it and hide the walls and elements that are not part of it.
- Fix a room tag that does not appearClose any gap or collision between walls so the room is properly enclosed and its room tag appears.
- Format room labels: font size, font type, bold, italics and colourChange a room label's font size, font type, bold, italics and colour from the room properties, and show the room area when you need it.
- 방 치수가 측정되는 방식방 치수가 어느 벽면을 기준으로 측정되는지, 그리고 측정 기준을 변경하는 방법을 알아보세요.
- How rooms are auto-numbered and renamed with labelsLearn how the software names each space Room 1, Room 2, Room 3 and so on as you add rooms to a design.
- 새로고침해도 탐색 모음에서 선택한 방 유지탐색 모음의 방 선택이 디자인과 함께 저장되는 방식과 이를 지우거나 안전하게 새로고침하는 방법을 알아보세요.
- Name a room and set its room typeClose a wall boundary into a room, then click its room label to give the room a name and a room type such as kitchen or bedroom.
- Name and type a room from its propertiesClick inside a closed room to open its properties, then rename it and pick a room type from the dropdown.
- 공장 및 견적 필터가 작동하도록 방과 층의 이름을 지정하세요프로젝트를 생성할 때 건물, 층, 방을 정의하면 공장 및 견적 필터가 작동합니다.
- Rename a room and change its type from room settingsOpen the room details from room settings to rename a room, change its type and adjust its label's font size, font type and font color.
- Rename a room and show or hide its area labelSet the area option to show or hide a room's area in the model space and choose the area format you prefer.
- Segregate open spaces into rooms with a room dividerUse a room divider to split an open-plan space into distinct functional rooms without adding physical walls.
- Room Settings에서 방의 유형과 이름을 설정하세요Room Settings > Type에서 각 방에 올바른 유형을 지정하세요. 새 방은 변경하기 전까지 유형이 Balcony이고 이름이 'Room <n>'임을 유의하세요.
- Set room inner dimensions and wall height before designingSet the left wall height and thickness and name the room so it is identifiable in the project before you start designing.
- Show room dimensions and rename rooms on the planTurn on the Label / Show option in a room's properties so its dimensions appear on the plan, and rename rooms from the same area or by clicking inside them.
- Work inside a room at room levelEnter a room to hide the walls that do not border it and reach its ceiling and tiling surfaces.
- 방 템플릿으로 디자인을 시작하고 벽 크기를 조정하기미리 만들어진 방이 포함된 방 템플릿으로 새 디자인을 시작한 다음, 벽을 선택하고 치수를 변경하여 크기를 조정하세요.
- FR enter와 룸 템플릿으로 캐비닛 추가하기FR과 enter로 캐비닛 라이브러리를 열고, 하부장이나 벽걸이장을 배치하고 회전하고 크기를 조정하고 복제하세요.
- 벽 틈 없이 방 모서리에서 천장을 그립니다천장 명령 메뉴에서 사각형을 그려 천장을 추가한 다음, 같은 방법으로 타일링을 추가합니다.
- 디자인을 방, 층, 건물로 구성하기디자인 공간이 방, 층, 건물 수준으로 어떻게 구성되는지 알아보고, 주택에 여러 층이 있을 때 층을 생성하세요.
- 2D로 평면도를 보고 3D 실 레벨로 인테리어를 확인하세요2D 모드로 전환하여 평면도를 보고, 3D의 실 레벨을 사용하여 가림 벽이 숨겨지고 천장이 보이는 상태로 인테리어를 확인하세요.
- 디자인을 재사용할 수 있도록 방 템플릿으로 표시향후 디자인에 재사용할 수 있도록 디자인을 템플릿으로 표시하세요.
- 방 안에 보와 기둥을 배치하고 프로파일을 편집합니다방 안에 보나 기둥을 추가하고, 단면을 변경하며, 정확하게 위치를 조정합니다.
- 빈 방 또는 프리셋 방에서 새 디자인 시작하기새 디자인을 시작하고, 처음부터 시작할 빈 방 또는 프리셋 소형 방 중 하나를 선택하세요.
- Add a ceiling by picking inside the room and applyingCreate a ceiling from the floor plan and adjust its elevation and thickness on the ceiling itself.
- Add kitchen cabinets from floor plan at room levelChoose a kitchen category and subcategory, pick the unit type, and place it in the room.
- 룸 레벨에서 아키텍처의 타일과 천장 추가아키텍처 섹션의 타일과 천장을 적용하여 룸을 완성한 다음, 천장을 벽에 맞추세요.
- 벽을 닫아 방을 만들고 벽 속성 편집하기벽을 닫아 방을 만들고 이름을 지정한 뒤, 속성 패널에서 벽 높이와 두께를 조정하세요.
- Copy a floor with its rooms and unitsDuplicate an existing floor so its rooms, names and units carry over to a new floor level.
- Create a ceiling or tiling from a closed room shapePick the shape tool, select a closed room shape, and apply it to create a ceiling or tiling.
- Edit wall interiors at room levelWork on the interiors of the wall at room level, rotate the room and view the wall height.
- How cabinets outside a room are treatedLearn how cabinets whose maximum portion lies outside the room boundary are handled by room-assignment logic.
- 3D 보기에서 유닛을 격리하고 QC 범위를 한 방으로 한정하기벽에 가리지 않고 유닛을 가까이에서 검사한 다음, 해당 방에 자체 작업 범위를 지정하여 그 방만 QC를 실행합니다.
- Locate a cabinet in the room with View in RoomUse the View in Room option below X-ray to see exactly where a cabinet sits in the room and help anyone reading a drawing find it.
- 건물, 층, 방 및 보기 간 이동형상을 편집하는 대신 탐색 도구 모음을 사용하여 프로젝트 내에서 위치를 이동하세요.
- Trim an extra wall or room-divider segmentRemove an extra wall or room-divider segment using the trim shortcut T R or the trim option in the on-screen menu.
- Understand why a cabinet straddling a room boundary is missing at room levelLearn why a cabinet that sits only partly inside a room and whose centre point falls outside the room boundary is not listed at room level.
- Work with building blocks, floor levels and rooms from the layoutCreate building blocks and floor levels in a project, then lay out a floor and define its rooms from that layout.