Infurnia Help
Production

How edge banding appears in the production cut list

See how the cut list follows the edge banding you apply in the design and what NO_EDGE_APPLICATION means on an edge.

  1. The cut list is generated according to whatever edge banding is applied in the design.

  2. In the production cut list, an edge-banding cell displays the placeholder NO_EDGE_APPLICATION when no edge-band material has been assigned to that edge of the part. It is not an error by itself; it indicates the edge is left unbanded in the design, and the part is produced without edge banding on that side.

    ✓ Checked in the product on 10 October 2026