Customize cut list columns and include edge band thickness

Set up the cut list columns you want and decide whether edge band thickness counts in the calculations.

1. The cut list by default includes serial number, part code, and dimensions.

   ✓ Checked in the product on 19 October 2026

   

   Back to the guide✕

   

2. Rearrange columns and access cut list preferences to customize displayed information.

   ✓ Checked in the product on 19 October 2026

   

   Back to the guide✕

   

3. You can choose whether to include edge band thickness in cut list calculations.

   ✓ Checked in the product on 19 October 2026

4. Grain direction is optimized automatically.

5. In the cut list a shutter's cutting size is its finished size less the edge band thickness on each banded edge, not a fixed 1 mm: a 718 x 348 shutter with 2 mm bands on all four edges cuts at 714 x 344, and with 0.8 mm bands on its left and right edges at 714 x 346.4 (with no pre-milling set in Cut List > Settings).

6. Download the cut list to verify.