Shutters
Guides: 158
- Add a shutter system configuration for glass and opening typesAdd a shutter system configuration and choose the opening type so a unit gets a glass shutter or a different mechanism.
- Apply a shutter design to selected shutter panelsOpen the Modify Shutter Design library, pick a design and apply it to the selected shutter panels at their finished size.
- Apply finger groove and handleless shutter designsApply finger groove and handleless shutter designs to cabinets and wardrobes from the shutter system under shutter design.
- Save and reuse shutter designs on cabinets and wardrobesSave a shutter design in Infurnia and apply it to cabinets and wardrobes through modify shutter design.
- Build aluminium profile shutter with glass and centre profilesCreate an aluminium profile shutter with a glass core and a centre profile by splitting it into individual panels.
- Add a shutter system to the whole cabinet or to a single partitionAdd a shutter system to an open cabinet as a whole or to just one partition.
- Insert sliding shutter system and apply external finishes to panelsComplete a wardrobe by inserting a sliding shutter system, customizing panel design options and applying an external finish to the panels.
- Change a normal shutter to a profile shutter via Modify Shutter DesignConvert a normal shutter into a profile shutter through the shutter settings instead of editing the panel geometry by hand.
- Override a single shutter or panel without affecting othersGive one shutter its own design and finish or change a single panel's materials while the rest of the cabinet stays as it is.
- Add a shutter to a partitionGive a partition its own shutter and choose between a single shutter, a double swing or a lift-up.
- Add front or back mirror to a shutter and set edge offsetsAdd a mirror to a shutter and control the gap between the mirror and the shutter edges.
- Change a shutter's core material to glass at panel levelSwitch a shutter's core to a custom material such as plain glass and set the glass thickness through the chosen core.
- Account for shutter, skirting and carcass dimensionsAdjust panel sizes for the shutter thickness, skirting buffer and drawer clearance that the carcass figures leave out.
- Change a cabinet's shutter system config from the Customize tabSelect the partition or shutter system and pick the required shutter system from the Customize tab so its config matches the new cabinet structure.
- Choose between shutter system configuration and panel editsDecide when to manage glass and frame variations through the shutter system configuration and when to edit the panel material directly.
- Get production details for SketchUp-imported shuttersShutter designs can be brought into Infurnia by uploading a SketchUp (.skp) file, but imported shutters do not generate production details.
- Add profile shutters and change handles via shutter system config and catalogAdd a shutter system to a cabinet's parent partition so a shutter is created automatically.
- Choose the opening direction for shuttersLearn which shutter systems offer the Toggle Opening direction control and how to change a corner unit's opening instead.
- Add a shutter to a single partition via Add Shutter SystemPlace a shutter on just one partition of a cabinet by selecting that partition and choosing Add Shutter System from its options.
- Change shutter design and handle at individual shutter levelSelect an individual shutter and use the "Shutter design" option to change its design or handle.
- Configure shutter and carcass material thickness and finishes separatelySet the core material and finish for the carcass and the shutter independently so each component carries its own selection.
- Control shutter edge visibility with the visible edge band settingSet the shutter visible edge band value to determine which edge band is shown on shutters.
- Create a cutout in a shutter via panel-level edit panel designCut a shape out of a shutter by drawing it in panel-level edit panel design and setting it to cut through the panel thickness.
- Create glass shutters and add profile handlesTurn a shutter panel into a glass shutter by switching its core material to a glass core in the Customize tab.
- How shutter dimensions are calculated from outer sizeLearn how the system derives a shutter's size by subtracting design parameters from the outer dimensions.
- Align shutters with panels and partitionsAdjust per-edge reductions so shutters sit flush, stay full height or leave a partition uncovered.
- Change a shutter's opening directionFlip a shutter's hinge side and let the software update the hinge-side manufacturing details for you.
- Change a shutter's opening mechanism via shutter system construction settingsChange how a shutter opens by selecting the shutter mechanism in the shutter system construction settings.
- Change a single shutter to a double swing shutterSplit one shutter into two by switching its shutter mechanism to double swing.
- Change shutter colour at cabinet level and panel finish at panel levelSet the shutter colour for a whole cabinet and the external finish for an individual panel.
- Convert a full-height shutter into drawersTurn a full-height shutter into drawers by removing it from the shutter system and adding drawers at partition level.
- Create profile shutters via shutter system constructionBuild a profile shutter by adding the required handle and non-handle side profiles from the catalogue in Shutter System Construction.
- Remove a shutter profile or change the core materialTake a profile off a shutter from the Shutter Profiles section and switch the shutter core material from the core material subcategory.
- Set shutter and carcass core material and thicknessChoose a core material such as BWP, BW or HDMR for shutters and carcasses and give each a thickness, with the back panel defaulting to 6 mm standard material.
- Use shutter system configuration for profile shuttersChange the glass colour of a profile shutter from the custom core instead of using shutter design.
- Apply a separate laminate to a specific shutter face areaEdit the shutter to define its shape, then select the specific face area and apply a separate laminate to it to create a two-colour shutter.
- Change corner unit shutters with shutter designsChange the shutters on a corner unit through shutter designs, since shutter configuration presets cannot be applied to corner cabinets.
- Edit, remove or replace a shutter systemChange shutter sizes, free up a zone, or swap an existing shutter for a different mechanism.
- How shutters are reduced by 1mm on all four sidesLearn how the default shutter construction reduces shutters by 1mm on all four sides and applies it automatically.
- Pick a shutter mechanism for a corner unit shapeChoose from the mechanisms each corner shape offers and avoid the ones that are refused.
- Remove the default shutter design from cabinet preferencesStop a shutter design being applied by default to new cabinet designs by clearing it in admin preferences.
- Set up shutter profiles and the divisional profileChoose the non-handle, handle and divisional profiles in the shutter construction settings so the divisions appear in the model and pricing.
- Understand the shutter back gap and hinge screw edge distanceLearn how the 2 mm gap between a shutter and the carcass front affects the hinge screw edge distance.
- Add vertical or horizontal divisions inside a shutterSplit a shutter into sections by adding a vertical or horizontal division in shutter system construction, then select and adjust it.
- Apply sliding and standard shutter mechanisms to partitionsAdd a shutter system on the correct partition and pick a mechanism that partition allows.
- Change cabinet shutter type and opening direction in Shutter System ConstructionSwitch the shutter mechanism between Single Swing and Double Swing, then flip the shutter opening direction from the same panel.
- Choose shutter mechanism type when applying lift-up shuttersPick the shutter mechanism that matches how you want the shutter to open.
- Choose wardrobe shutter types in unit configurationPick the shutter arrangement you need from the shutter types available in the unit configuration instead of modelling it manually.
- Create a curved shutter by editing the panel design and cuttingDraw the shutter shape in Edit Panel Design and cut it to the panel thickness to create a curved shutter.
- Keep shutter widths within single and double shutter limitsLearn the width limits for single and double shutters and how to divide a single shutter into a double swing shutter.
- Restore a removed shutter system on a partitionAdd a swing shutter system back to a partition whose shutters were removed, or remove them again with None.
- Toggle shutter direction, unit and shelf annotations in elevation preferencesControl which elevation annotations appear by turning shutter directions, unit annotations and shelf annotations on or off in elevation preferences.
- Apply a shutter system to a cabinetChoose a swing, sliding or lift-up shutter system and apply it to a cabinet from the customize tab.
- Apply shutter extension through shutter construction settingsApply the shutter extension over an end panel through the shutter construction settings each time, since it cannot be predefined per unit.
- Change frame and glass colour on a cabinet's shuttersChange the glass at the cabinet level through Custom Core, and the frame colour through Shutter System Config, which replaces the whole configuration.
- Change shutter edge-reduction values on shutters already in the designLearn that shutter edge-reduction values are general construction defaults and change them on shutters already in the design with bulk edit.
- Change shutter reductions per sideEnter reduction amounts on individual sides of a shutter, including negative values to extend it.
- Customise or remove glass profile shuttersCustomise or remove the shutters on a glass profile to change how the glass looks.
- Enable shutter and countertop dimensioning in preferencesTurn on the dimension preference for shutters and countertops so those parts become selectable and can be dimensioned.
- How shutter colour and per-area colours combine on panelsLearn how the shutter colour sets the base colour of a multi-area panel while areas given their own colour keep it.
- How shutter system configuration adapts to any furniture sizeLearn how shutter system configuration applies to any furniture and scales its profiles and glass automatically to the shutter size.
- Merge shutters and drawer fasciasMake one shutter span several partitions or one fascia span several drawers, and learn what the merge requires.
- Open construction to reach shutter profilesOpen construction to reach shutter profiles such as non-handle and handle profiles.
- Set profile shutter height from profile thicknessConfigure a profile shutter so its height matches the profile thickness, and keep it in sync when that thickness changes.
- Set shutters and drawers to internal finish to keep outer frame visibleMake the outer frame sit outside the shutter face by setting the shutter to internal and the drawer facia to the external finish.
- Set the shutter width on a blind corner cabinetSee where a blind corner cabinet's shutter width sits alongside its cabinet width, depth and height.
- Understand where shutter reductions come fromLearn how the four margin values are set by construction preferences and why each shutter can still differ.
- Add a basket on the shutter via shutter customizeAdd a separate basket accessory on the shutter panel so a basket appears on the shutter when it opens.
- Add horizontal divisions to a shutterSplit a shutter into paddle divisions and add one more division with each click.
- Attach shutter mechanism hardware and manage its quantityAttach lift-up pistons, flap fittings, sliding rail sets and rolling-shutter mechanisms from the door-system menu, then control how many copies are attached.
- Change wardrobe shutter material, edge band, handle and placement in propertiesSelect a wardrobe and change its shutter materials and finishes, edge bands, handles and handle placement from the properties panel.
- Choose a wardrobe shutter configurationSet the wardrobe section to swing, single-shutter or double-shutter to match how its doors open.
- Choose between sliding and swing shutter systemsShutter systems in a cabinet can be configured as sliding or swing mechanisms, and you can remove or change the shutter system independently of the partition position.
- Create a shutter cutout with offset and fillet, then add a glass insetCut a shaped opening in a shutter panel and finish it with a glass inset.
- How shutter sizing reductions and Shutter Gap work in a construction styleLearn how a construction style reduces every side of a shutter and applies a separate Shutter Gap between the two panels of a double shutter, both set in the construction style preferences.
- How the closest shutter size and variant are chosenLearn how the system picks the closest available shutter size and size variant when nothing matches the cabinet exactly.
- Open a shutter in the 3D viewRight-click a shutter in the 3D view to open it.
- Set the gap between shuttersSelect the shutter in the tree, open the shutter system, and set the gap value on the construction tab.
- Set the shutter gap for a designSet the required gap per design and apply it to double-swing shutters and corner units.
- Apply 3D shutter designs to cabinets via modify shutter designsApply 3D shutter designs to cabinets through modify shutter designs, where glass designs also support autoscaling.
- Change construction and shutter options at unit levelApply construction and shutter changes to a single unit and see the difference on its panels.
- Check shutter settings after correcting shutter reductionsCorrect the shutter reduction in the construction preferences, then check or bulk-edit the shutter settings of units already placed in existing designs.
- Check why a shutter edge has no edgeband with a Gola handleLearn how a Gola, profile or finger-groove handle can replace the edgeband on the shutter edge it sits on, and how to tell that from a defect.
- Choose shutter design options in the shutter system propertySet the shutter design options in the shutter system property, since shutter and drawer systems share properties except for construction.
- Dimension shutters and countertops in a flow planDimension shutters and countertops in a flow plan either point-to-point or line-to-line, with line-to-line preferred.
- Feature flags cannot be scoped to shutters onlyFeature flags can be enabled, disabled, or disabled for designers, but they apply to a whole feature area rather than a single part such as shutters.
- How shutters are treated as external or internalLearn how the shutter system property treats shutters as external by default and what changes when you mark one as internal.
- Modify shutters, handles, drawers and materials from the property tabChange shutters, handles, drawers and materials from the property tab and see each change apply in a click.
- Open and close all shutters on a 3 Door Sliding Shutter systemSlide every door of a 3 Door Sliding Shutter system open or back from the Shutter System panel's Construction tab.
- Restore a deleted shutter systemRe-add a removed shutter system by selecting the partition and using Add Shutter System, or bring it back with Ctrl+Z straight after the removal.
- Set shutter and carcass core material and thickness from Quick AccessSet the shutter and carcass core material and its thickness from Quick Access.
- Set shutter system to internal and toggle opening directionAn internal shutter works on the same principle as the external type.
- Set the shutter reduction for a J profile drawerSet the shutter reduction to 30 when you use a J profile drawer.
- Understand what the shutter back gap setting affectsLearn that the shutter back gap setting only changes 3D visualization and leaves cut lists and production data unchanged.
- Why a none shutter mechanism creates no connector scenariosLearn why setting the shutter mechanism to none stops the software from auto-creating connector scenarios.
- Match carcass, side panel and edge band finishes to the shutterSet the carcass and side panel finishes separately and make edge bands follow the shutter's visible edge band setting.
- Change shutter handle, accessory, mechanism and design from shutter system levelChange the handle, mechanism and catalogue design of a shutter from the shutter system level.
- Split a tall unit into solid bottom and glass top shuttersBuild a mixed tall unit with a solid bottom shutter and a glass top shutter by setting the top shutter mechanism and panel core materials.
- Add an end panel that takes shutter properties outside the carcassAdd an end panel to a cabinet so a visible finished side panel sits outside the carcass with the shutter's properties.
- Change handle type, orientation and position via shutter system settingsOpen the shutter system settings to switch handle types, set orientation and configure position.
- Create external wardrobe drawers by removing shutters and adding a shelf zoneRemove the existing shutters and add a shelf zone so you can create external drawers in a wardrobe.
- Convert a standard wardrobe to sliding by replacing shuttersTurn a standard wardrobe into a sliding wardrobe by deleting its existing shutters and adding a new shutter system configured as two-door or three-door sliding.
- Create an internal drawer by turning off fascia and extending shutterAdd a normal drawer, turn off its fascia so it has no front, then extend the shutter fascia above it to cover the opening.
- Add and configure partitions, shelves, drawers and shuttersAdd components at partition level so each shelf, drawer set or shutter system applies only to that portion of the unit.
- Control ply, finish and edge bands with shutter design ply finish displaySet the 'ply finish display' property on a shutter design SKU to decide what the underlying panel contributes and how its finish and edge bands behave.
- Set cabinet-level shutter and carcass finishes and coresPick the shutter and carcass finishes and core materials from the properties panel so inheriting shutters follow the cabinet.
- Add handle and non-handle profiles to a shutterPick a handle or non-handle profile from the profile library and apply it to the selected shutter.
- Add handle profiles via Construction then Shutter ProfileConfigure shutter handle profiles by opening Construction then Shutter Profile and selecting the profile types in the correct sequence.
- Add shelves via partition and shutters via shutter systemAdd a shelf with the partition option and add shutters with the Add Shutter System option, then set the mechanism to single or double swing.
- Choose drawer filler options on the shutter sideWhen configuring a drawer, choose fillers on both sides, a left-side filler or a right-side filler.
- Create an open corner unit by removing the shuttersPlace a standard corner unit, remove its shutters to make it open, and save the result for reuse.
- How cabinet structure splits into shutters, drawers and accessoriesLearn how a cabinet's structure is divided into shutters, drawers and accessories, and how shutter and drawer systems are configured separately.
- Understand L-corner unit dimensions and shutter optionsLearn how the Front Back, Side Back, Side Left and Side Right dimensions map to an L-corner unit's faces and which shutter systems it offers.
- Add fillers to a drawer system with hinged shuttersAdd fillers to a drawer system used with hinged shutters so the parts do not collide, then trim the default three panels to suit.
- Configure a sliding door with internal shutter system propertiesInsert the sliding mechanism and set the shutter system to internal shutter system in properties to create a sliding door.
- Plan drawers, shutters and partitions before buildingSet shelf reveal, partition heights and shutter or drawer zones before customizing the internals.
- Set shelf reveal to zero for external shutters and drawersSet the shelf reveal to zero so external shutters and drawers are not offset by the internal shelf spacing.
- Set the section height for a drawer above a shutterAdd a shelf at partition level and set the section height so the drawer above a shutter comes out at the height you want.
- Change skirting finish independently of shutterGive the skirting of a skirting wardrobe its own finish instead of the shutter's default.
- Design a rolling shutter as a shutter designDesign a rolling shutter as a shutter design in the platform and switch between the available shutters when more than one exists.
- Divide a wardrobe into main partitions before adding shuttersSplit the wardrobe into main partitions first, then subdivide them for shelves and verticals, and add shutter systems with customised mechanisms afterwards.
- Enable shutter panel for manual dimensioning to measure carcass to shutterMeasure from carcass to shutter in the floor plan by enabling panels for manual dimensioning and selecting the shutter panel.
- Place profile handles on framed, wall and base shuttersChoose the side for a profile handle and rely on the defaults and hinge rules for framed, wall and base units.
- Add a corner-unit accessory through the shutter systemFix a magic corner or similar accessory to the shutter through the shutter accessories section.
- Apply a shelf reveal of 20 or 25 to the shutter spaceApply a shelf reveal of 20 or 25 to the shutter space so the shelves and partitions are set before you add a drawer set.
- Change drawer facia via drawer level shutter configChange the facia of a drawer by selecting a shutter configuration at the drawer level of the drawer system.
- Create trim and groove designs on a shutter with Extrude and CutPull a drawn region forward with Extrude or recess it by a cut depth to build trim and groove-style designs on a shutter.
- Drive panel and shutter dimensions with parametric valuesGive panel and shutter dimensions a parametric value so they resize automatically when the driving measurement changes.
- Understand profile dimensions in a profile shutter systemLearn how each profile element's own Dimensions, H and D values change that profile and the glass in a profile shutter system.
- Use the selection tree to reach cabinet, partition, shutter and panel controlsSelect a cabinet part to expose the levels above it and jump straight to the controls you need.
- Add internal drawers behind wardrobe shuttersAdd drawers on a partition and switch the new Drawer System's Properties > Type to Internal so the drawers sit behind the shutters.
- Adjust skirting height and shutter system under wardrobe constructionChange the skirting height or shutter system for wardrobes and standard cabinets from the third tab under wardrobe construction options.
- Align a shelf between a shutter and a drawerLearn where a shelf sits by default between a shutter and a drawer and how to shift its alignment by adjusting the extension.
- Bulk-edit hinge positions across multiple shutters via scenario viewUse the scenario view flow to bulk-edit hinge positions across multiple shutters, and apply the same flow to replace one hinge type with another.
- Choose drawer system for drawers and shutter system for shutters in constructionConfigure each cabinet front under the right system and construction, drawers under the drawer system and shutters under the shutter system.
- Create a hinge custom scenario between an internal panel and shutterSet the connector source to manual, then create the scenario connector and add the relevant connector card, such as a blind corner connector.
- Create open wall unit panels and set shutter mechanism to noneSet the shutter mechanism to none when the unit is not a shutter.
- Make inside shelf fixed and set shutter materialSet the inside shelf of a cabinet as a fixed panel and reduce it 20 mm from the front.
- Map hinges automatically from shutter heightSet the shutter dimensions and the hinges are mapped for you, with no manual entry.
- Mirror a panel design shape onto the opposite shutterMirror a selected shape with MI, switch the operation from copy to move, and pick from the centre top to the centre bottom so it lands on the opposite shutter.
- Remove edge bands from PU shutters and internal drawersRemove the mapped edge band from PU shutters or internal drawers so edge binding no longer appears on those parts.
- Set handle placement for knob, bar and gas-lift shuttersPlace normal knob or bar handles on the 9-position grid and know which placements gas-lift and Double Lift Up shutters allow.
- Use a panel type condition to differentiate shutter variants in hardware rulesGive a special shutter variant its own panel type so a hardware rule can tell it apart without the shutter design tag.
- Add a partition configuration to a wardrobe with or without shuttersAdd an internal layout to the root partition whether the shutters are still on or have been removed.
- Add a shelf above a shutter by hiding the appliance and using the partitionAdd the shelf at the partition level so it matches the arrangement used in similar units.
- Apply a G profile as a handle on sliding wardrobe shuttersApply a G profile handle to a sliding wardrobe shutter through the normal handle application flow for the shutter.
- How exposed panels take shutter core and finishLearn what happens to a panel's core material, finish and board layout when you change it to an exposed panel.
- How finish categories control shutter and carcass surfacesLearn how the four finish categories decide which panel surface a finish is applied to and why choosing correctly matters.
- How gola and FGP handles shrink shutters and drawersLearn how gola and finger-groove handle items automatically shorten shutters and drawer fronts through reduction values set on the handle item.
- How hardware positioning and shutter reductions workLearn how the platform handles hardware positioning on shutters and shutter reductions as built-in features for modular furniture.
- How new cabinets get their default shutter thicknessLearn where the shutter thickness applied to a newly placed cabinet comes from.
- Open and close drawers and shutters in a designOpen a drawer or shutter to see it move and stay that way when the design is reopened.
- Set External finish source to shutter external finishSet the External finish source to the shutter external finish so a thick shutter core gets its finish from the right place.
- Set handle position on selected shutters after Modify HandleApply a handle to several selected cabinets or wardrobes through Modify Handle, then set the handle position for the selected shutters.
- Snap lofts carcass-to-carcass, not shutter-to-shutterAlign loft units by their carcasses rather than their shutters, since shutters carry a 2 mm gap between them.
- Turn on the Automatic Shutter Design PickerEnable the preference under Other Preferences so applying a shutter design picks the closest-size design from the same catalog group.
- Understand the fixed main partition in a rolling shutter moduleLearn that a rolling shutter module's main partition is fixed and cannot be adjusted through the reduction parameters.