百叶窗
指南:158
- 为玻璃和开启类型添加门板系统配置添加门板系统配置并选择开启类型,使单元获得玻璃门板或其他机构。
- 将门板设计应用到选中的门板面板打开Modify Shutter Design库,选择一个设计,并将其按成品尺寸应用到选中的门板面板。
- Apply finger groove and handleless shutter designsApply finger groove and handleless shutter designs to cabinets and wardrobes from the shutter system under shutter design.
- 在柜体和衣柜上保存并复用门板设计在 Infurnia 中保存门板设计,并通过 modify shutter design 将其应用到柜体和衣柜上。
- Build aluminium profile shutter with glass and centre profilesCreate an aluminium profile shutter with a glass core and a centre profile by splitting it into individual panels.
- 为整个柜体或单个隔板添加门板系统为整个开放柜体或仅为一个隔板添加门板系统。
- 插入滑动门板系统并为面板应用外部饰面通过插入滑动门板系统、自定义面板设计选项并为面板应用外部饰面,完成衣柜。
- 通过 Modify Shutter Design 将普通百叶窗更改为型材百叶窗通过百叶窗设置将普通百叶窗转换为型材百叶窗,而不是手动编辑面板几何形状。
- 单独覆盖一个门板或板材,不影响其他部分为单个门板设置独立的设计和饰面,或更改单块板材的材料,而柜体的其余部分保持不变。
- 为隔板添加柜门为隔板单独设置柜门,并选择单开门、双开门或上翻门。
- 为百叶窗添加正面或背面镜子并设置边缘偏移为百叶窗添加镜子,并控制镜子与百叶窗边缘之间的间隙。
- 在板件层级将门板的芯材改为玻璃将门板的芯材切换为普通玻璃等自定义材料,并通过所选芯材设置玻璃厚度。
- 考虑门板、踢脚线和柜体尺寸柜体数据未包含门板厚度、踢脚线缓冲和抽屉间隙,请据此调整板件尺寸。
- 从 Customize 选项卡更改柜体的门板系统配置选择隔板或门板系统,并在 Customize 选项卡中选择所需的门板系统,使其配置与新柜体结构相匹配。
- Choose between shutter system configuration and panel editsDecide when to manage glass and frame variations through the shutter system configuration and when to edit the panel material directly.
- 获取 SketchUp 导入的门板的加工详情门板设计可以通过上传 SketchUp (.skp) 文件导入 Infurnia,但导入的门板不会生成加工详情。
- Add profile shutters and change handles via shutter system config and catalogAdd a shutter system to a cabinet's parent partition so a shutter is created automatically.
- 选择柜门的开启方向了解哪些柜门系统提供Toggle Opening direction控制,以及如何改为设置转角柜的开启方向。
- 通过Add Shutter System为单个隔板添加柜门通过选择柜体的某一个隔板,并在其选项中选择Add Shutter System,即可仅在该隔板上放置柜门。
- 在单个门板级别更改门板设计和拉手选择单个门板,然后使用"Shutter design"选项更改其设计或拉手。
- 分别配置门板和柜体的材料厚度与饰面分别设置柜体和门板的芯材与饰面,使每个部件各自保留自己的选择。
- 通过可见封边设置控制门板边缘可见性设置门板可见封边值,以确定门板上显示哪条封边。
- 通过板件级编辑板件设计在门板上创建挖空在板件级编辑板件设计中绘制形状,并将其设置为切穿板件厚度,即可在门板上挖出该形状。
- Create glass shutters and add profile handlesTurn a shutter panel into a glass shutter by switching its core material to a glass core in the Customize tab.
- 如何根据外尺寸计算门板尺寸了解系统如何通过从外尺寸中减去设计参数来得出柜门的尺寸。
- 将柜门与板件和隔板对齐调整各边的缩减量,使柜门齐平、保持全高,或让隔板露出一部分。
- 更改柜门的开启方向翻转柜门的铰链侧,软件会为您更新铰链侧的制造细节。
- 通过柜门系统构造设置更改柜门的开启方式在柜门系统构造设置中选择柜门机构,即可更改柜门的开启方式。
- 将单扇门板改为双开门板将门板机构切换为双开,即可把一块门板分成两块。
- 在柜体层级更改门板颜色,在板件层级更改板材饰面为整个柜体设置门板颜色,为单个板件设置外饰面。
- 将通高柜门改为抽屉将通高柜门从柜门系统中移除,并在隔板层级添加抽屉,即可将通高柜门改为抽屉。
- 通过门板系统构造创建型材门板在Shutter System Construction 中从目录添加所需的带拉手侧型材和不带拉手侧型材,即可构建型材门板。
- 移除门板型材或更改芯材在Shutter Profiles部分中从门板上移除型材,并在芯材子类别中切换门板芯材。
- 设置门板和柜体的芯材与厚度为门板和柜体选择芯材,例如 BWP、BW 或 HDMR,并为每种材料指定厚度;背板默认使用 6 mm 标准材料。
- Use shutter system configuration for profile shuttersChange the glass colour of a profile shutter from the custom core instead of using shutter design.
- 为特定的门板面区域单独贴覆饰面板编辑门板以定义其形状,然后选择特定的面区域并为其单独贴覆饰面板,以制作双色门板。
- 通过门板设计更换转角柜门板转角柜的门板需通过门板设计更换,因为门板配置预设无法应用于转角柜。
- 编辑、移除或替换门板系统更改门板尺寸、腾出一个区域,或将现有门板换成其他机制。
- 如何将柜门四边各缩小1mm了解默认构造如何将柜门四边各缩小1mm并自动应用。
- 为转角单元形状选择一种柜门机构从每种转角形状提供的机构中选择,并避开被拒绝的机构。
- 从柜体偏好设置中移除默认门板样式在管理员偏好设置中清除门板样式,即可停止将其默认应用到新的柜体设计。
- Set up shutter profiles and the divisional profileChoose the non-handle, handle and divisional profiles in the shutter construction settings so the divisions appear in the model and pricing.
- 了解门板后间隙与铰链螺丝边距了解门板与柜体前部之间的 2 mm 间隙如何影响铰链螺丝边距。
- 在门板内添加垂直或水平分隔在门板系统构造中添加垂直或水平分隔,将门板分成多个部分,然后选择并调整该分隔。
- 为隔板应用推拉和标准门板机构在正确的隔板上添加门板系统,并选择该隔板允许的机构。
- 在Shutter System Construction中更改柜门类型和开启方向在Single Swing和Double Swing之间切换柜门机构,然后在同一面板中翻转柜门开启方向。
- 应用上翻门板时选择门板机构类型选择与您希望门板开启方式相符的门板机构。
- 在单元配置中选择衣柜门板类型请从单元配置中可用的门板类型里选择所需门板布局,无需手动建模。
- 通过编辑面板设计并切割来创建弧形柜门在Edit Panel Design中绘制柜门形状,并按面板厚度切割,以创建弧形柜门。
- 将门板宽度保持在单门板与双门板的限值内了解单门板和双门板的宽度限值,以及如何将单门板拆分为双开门板。
- 恢复隔板上已移除的门板系统为已移除门板的隔板重新添加平开门板系统,或用 None 再次移除。
- 在立面偏好设置中切换百叶方向、单元标注和搁板标注在立面偏好设置中开启或关闭百叶方向、单元标注和搁板标注,以控制显示哪些立面标注。
- 为柜体应用门板系统在 customize 选项卡中选择平开门、推拉门或上翻门门板系统,并将其应用到柜体。
- 通过门板构造设置应用端板上的门板延伸端板上的门板延伸无法按单元预定义,因此每次都要通过门板构造设置来应用。
- 更改柜体门板的边框和玻璃颜色通过Custom Core在柜体层级更改玻璃,通过Shutter System Config更改边框颜色,后者会替换整个配置。
- 更改设计中已有门板的门板减边值了解门板减边值是常规构造默认值,并通过批量编辑更改设计中已有门板的这些值。
- 更改每侧门板的缩减量在门板的各个侧边输入缩减量,包括输入负值以扩展门板。
- 自定义或移除玻璃型材门板自定义或移除玻璃型材上的门板,以改变玻璃的外观。
- 在偏好设置中启用门板和台面标注开启门板和台面的标注偏好设置,使这些部件可被选中并进行标注。
- 柜门颜色与各区域颜色如何在面板上组合了解柜门颜色如何设定多区域面板的基础颜色,而单独指定了颜色的区域则保留其颜色。
- 百叶门系统配置如何适应任何家具尺寸了解百叶门系统配置如何应用于任何家具,并自动按百叶门尺寸缩放其型材和玻璃。
- 合并柜门和抽屉面板让一扇柜门跨越多个隔板,或让一块面板跨越多个抽屉,并了解合并的前提条件。
- 打开构造以访问门板型材打开构造以访问门板型材,例如无拉手型材和拉手型材。
- 根据型材厚度设置型材门板高度配置型材门板,使其高度与型材厚度一致,并在厚度变化时保持同步。
- 将柜门和抽屉面板设为内部饰面,以保持外框可见将柜门设为内部饰面,抽屉面板设为外部饰面,使外框位于柜门表面之外。
- 设置盲角柜的门板宽度查看盲角柜的门板宽度与柜体宽度、深度和高度之间的关系。
- 了解门板缩减量的来源了解四个边距值如何由构造偏好设定,以及为什么每块门板仍可能不同。
- 通过门板自定义在门板上添加拉篮在门板面板上添加一个单独的拉篮配件,这样门板打开时就会显示拉篮。
- 为柜门添加水平分隔将柜门拆分为多个分格,每点击一次就再添加一个分隔。
- 安装柜门机构五金件并管理其数量从门系统菜单中安装上翻活塞、翻板配件、滑轨套件和卷帘机构,然后控制安装的副本数量。
- 在属性中更改衣柜门板材料、封边、拉手和位置选择衣柜,在属性面板中更改其门板材料和饰面、封边、拉手以及拉手位置。
- 选择衣柜门板配置将衣柜部分设置为平开门、单门板或双门板,以匹配其柜门的开启方式。
- 在推拉门和平开门系统之间选择柜体的门板系统可配置为推拉或平开机构,并且您可以独立于隔板位置移除或更改门板系统。
- 创建带偏移和圆角的门板开口,然后添加玻璃嵌板在门板上切出成型开口,并用玻璃嵌板收口。
- 构造样式中的门板尺寸缩减和Shutter Gap如何运作了解构造样式如何缩减门板的每一边,并在双门板的两块面板之间应用单独的Shutter Gap,两者均在构造样式偏好设置中设定。
- 如何选择最接近的门板尺寸和变体了解当没有任何尺寸与柜体完全匹配时,系统如何选择最接近的可用门板尺寸和尺寸变体。
- 在3D视图中打开柜门在3D视图中右键单击柜门即可打开。
- 设置门板之间的间隙在树中选择门板,打开门板系统,然后在构造选项卡上设置间隙值。
- 为设计设置门板间隙Set the required gap per design and apply it to double-swing shutters and corner units.
- Apply 3D shutter designs to cabinets via modify shutter designsApply 3D shutter designs to cabinets through modify shutter designs, where glass designs also support autoscaling.
- Change construction and shutter options at unit levelApply construction and shutter changes to a single unit and see the difference on its panels.
- Check shutter settings after correcting shutter reductionsCorrect the shutter reduction in the construction preferences, then check or bulk-edit the shutter settings of units already placed in existing designs.
- 检查为什么带有Gola拉手的门板边缘没有封边条了解Gola拉手、型材拉手或指槽拉手如何替代其所处门板边缘上的封边条,以及如何将其与缺陷区分开。
- Choose shutter design options in the shutter system propertySet the shutter design options in the shutter system property, since shutter and drawer systems share properties except for construction.
- 在流程平面图中标注百叶窗和台面的尺寸在流程平面图中,百叶窗和台面的尺寸标注可采用点对点或线对线方式,推荐使用线对线。
- Feature flags cannot be scoped to shutters onlyFeature flags can be enabled, disabled, or disabled for designers, but they apply to a whole feature area rather than a single part such as shutters.
- How shutters are treated as external or internalLearn how the shutter system property treats shutters as external by default and what changes when you mark one as internal.
- Modify shutters, handles, drawers and materials from the property tabChange shutters, handles, drawers and materials from the property tab and see each change apply in a click.
- Open and close all shutters on a 3 Door Sliding Shutter systemSlide every door of a 3 Door Sliding Shutter system open or back from the Shutter System panel's Construction tab.
- Restore a deleted shutter systemRe-add a removed shutter system by selecting the partition and using Add Shutter System, or bring it back with Ctrl+Z straight after the removal.
- Set shutter and carcass core material and thickness from Quick AccessSet the shutter and carcass core material and its thickness from Quick Access.
- 将百叶窗系统设为内置并切换开启方向内置百叶窗的工作原理与外置式相同。
- Set the shutter reduction for a J profile drawerSet the shutter reduction to 30 when you use a J profile drawer.
- Understand what the shutter back gap setting affectsLearn that the shutter back gap setting only changes 3D visualization and leaves cut lists and production data unchanged.
- Why a none shutter mechanism creates no connector scenariosLearn why setting the shutter mechanism to none stops the software from auto-creating connector scenarios.
- 将柜体、侧板和封边饰面与门板匹配分别设置柜体和侧板的饰面,并让封边跟随门板的可见封边设置。
- 从门板系统层级更改门板拉手、配件、机构和设计在门板系统层级更改门板的拉手、机构和目录设计。
- 将高柜拆分为实心底门板和玻璃顶门板通过设置顶门板机构和面板芯材,构建一个底部为实心门板、顶部为玻璃门板的混合高柜。
- 添加一块封板,使其在柜体之外采用门板属性为柜体添加一块封板,使可见的成品侧板位于柜体之外,并采用门板的属性。
- 通过门板系统设置更改拉手类型、方向和位置打开门板系统设置,以切换拉手类型、设置方向并配置位置。
- Create external wardrobe drawers by removing shutters and adding a shelf zoneRemove the existing shutters and add a shelf zone so you can create external drawers in a wardrobe.
- 通过更换柜门将标准衣柜改为推拉门衣柜删除现有柜门并添加新的柜门系统,将其配置为两门或三门推拉式,即可将标准衣柜改为推拉门衣柜。
- Create an internal drawer by turning off fascia and extending shutterAdd a normal drawer, turn off its fascia so it has no front, then extend the shutter fascia above it to cover the opening.
- 添加并配置隔板、搁板、抽屉和柜门在隔板层级添加组件,使每组搁板、抽屉组或柜门系统仅应用于该单元的这一部分。
- Control ply, finish and edge bands with shutter design ply finish displaySet the 'ply finish display' property on a shutter design SKU to decide what the underlying panel contributes and how its finish and edge bands behave.
- 设置柜体级别的门板和柜体饰面及芯材在属性面板中选择门板和柜体饰面以及芯材,使继承的门板跟随柜体。
- 为门板添加拉手型材和非拉手型材从型材库中选择拉手型材或非拉手型材,并将其应用到所选门板。
- 通过“柜体结构”再“门板型材”添加拉手型材要配置门板拉手型材,请依次打开“柜体结构”和“门板型材”,并按正确顺序选择型材类型。
- Add shelves via partition and shutters via shutter systemAdd a shelf with the partition option and add shutters with the Add Shutter System option, then set the mechanism to single or double swing.
- 在柜门侧选择抽屉填充件选项配置抽屉时,可选择两侧填充件、左侧填充件或右侧填充件。
- 通过移除柜门创建开放角柜放置一个标准角柜,移除其柜门使其成为开放柜,并保存结果以便重复使用。
- 柜体结构如何拆分为门板、抽屉和配件了解柜体结构如何划分为门板、抽屉和配件,以及门板系统和抽屉系统如何分别配置。
- 了解L型转角单元的尺寸和门板选项了解 Front Back、Side Back、Side Left 和 Side Right 尺寸如何对应L型转角单元的各面,以及它提供哪些门板系统。
- 为带铰链门板的抽屉系统添加填充件为与铰链门板配合使用的抽屉系统添加填充件,以免部件相互碰撞,然后修剪默认的三块板件以适配。
- 配置带内部门板系统属性的滑动门插入滑动机构,并在属性中将门板系统设为内部门板系统,即可创建滑动门。
- 在建造前规划抽屉、柜门和隔板在自定义内部结构之前,设置层板内缩、隔板高度以及柜门或抽屉区域。
- 将外部柜门和抽屉的层板内缩量设为零将层板内缩量设为零,以免外部柜门和抽屉因内部层板间距而产生偏移。
- 为门板之上的抽屉设置区段高度在隔板位置添加一块搁板,并设置区段高度,使门板上方的抽屉达到所需高度。
- 独立于柜门更改踢脚板饰面为带踢脚板的衣柜的踢脚板单独设置饰面,而不使用柜门的默认饰面。
- 将卷帘门设计为门板设计在平台中将卷帘门设计为门板设计,当存在多个可用门板时可在其间切换。
- 在添加柜门前,先将衣柜划分为主隔板先按主隔板将衣柜划分,再细分出层板和竖板,之后再添加柜门系统并自定义其机构。
- 启用手动标注尺寸的柜门板,以测量柜体到柜门的距离在平面图中,通过启用手动标注尺寸的板件并选择柜门板,测量从柜体到柜门的距离。
- 为有框、吊柜和地柜门板放置型材拉手为型材拉手选择安装侧,有框、吊柜和地柜单元可沿用默认值和铰链规则。
- 通过门板系统添加转角单元配件在门板配件部分将转角拉篮或类似配件固定到门板上。
- 对门板空间应用 20 或 25 的层板内缩在添加抽屉组之前,对门板空间应用 20 或 25 的层板内缩,以便层板和隔板就位。
- 通过抽屉层级的门板配置更改抽屉面板在抽屉系统的抽屉层级选择门板配置,即可更改抽屉的面板。
- Create trim and groove designs on a shutter with Extrude and CutPull a drawn region forward with Extrude or recess it by a cut depth to build trim and groove-style designs on a shutter.
- 用参数值驱动面板和门板尺寸为面板和门板尺寸指定参数值,这样当驱动尺寸变化时,它们会自动调整大小。
- 了解型材门板系统中的型材尺寸了解每个型材元素自身的尺寸、H 和 D 值如何改变该型材以及型材门板系统中的玻璃。
- Use the selection tree to reach cabinet, partition, shutter and panel controlsSelect a cabinet part to expose the levels above it and jump straight to the controls you need.
- 在衣柜门板后添加内部抽屉在隔板上点击Add drawers,并将新的Drawer System's Properties > Type切换为Internal,使抽屉位于门板之后。
- 在衣柜构造下调整踢脚高度和门板系统在衣柜构造选项下的第三个标签页中,更改衣柜和标准柜体的踢脚高度或门板系统。
- Align a shelf between a shutter and a drawerLearn where a shelf sits by default between a shutter and a drawer and how to shift its alignment by adjusting the extension.
- 通过场景视图批量编辑多个柜门的铰链位置使用场景视图流程批量编辑多个柜门的铰链位置,并用同一流程将一种铰链类型替换为另一种。
- 在构造中,为抽屉选择抽屉系统,为门板选择门板系统在正确的系统和构造下配置每个柜体的正面,抽屉在抽屉系统下配置,门板在门板系统下配置。
- 在内板和门板之间创建铰链自定义场景将连接件来源设为手动,然后创建场景连接件并添加相关连接件卡片,例如盲角连接件。
- 创建开放式壁柜板件,并将门板机制设为无当单元不是门板时,将门板机制设为无。
- 将内部搁板设为固定,并设置柜门材料将柜体的内部搁板设为固定板,并从前方缩减 20 mm。
- 根据门板高度自动映射铰链设置门板尺寸后,系统会为您映射铰链,无需手动输入。
- 将一块板件设计形状镜像到对侧柜门使用 MI 镜像所选形状,将操作从复制切换为移动,然后从顶部中心选到底部中心,使其落到对侧柜门上。
- 从PU门板和内部抽屉移除封边条从PU门板或内部抽屉移除已映射的封边条,使这些部件上不再显示封边。
- 为旋钮、拉手条和气撑上翻门的拉手设置安装位置在 9 个位置的网格上放置普通旋钮或拉手条拉手,并了解气撑上翻门和 Double Lift Up 上翻门允许哪些位置。
- 使用板件类型条件在五金规则中区分门板变体为特殊的门板变体指定单独的板件类型,使五金规则无需门板设计标签即可将其区分开。
- Add a partition configuration to a wardrobe with or without shuttersAdd an internal layout to the root partition whether the shutters are still on or have been removed.
- Add a shelf above a shutter by hiding the appliance and using the partitionAdd the shelf at the partition level so it matches the arrangement used in similar units.
- Apply a G profile as a handle on sliding wardrobe shuttersApply a G profile handle to a sliding wardrobe shutter through the normal handle application flow for the shutter.
- How exposed panels take shutter core and finishLearn what happens to a panel's core material, finish and board layout when you change it to an exposed panel.
- How finish categories control shutter and carcass surfacesLearn how the four finish categories decide which panel surface a finish is applied to and why choosing correctly matters.
- gola 和 FGP 如何处理缩进的柜门和抽屉了解 gola 和指槽拉手类物品如何通过拉手物品上设置的缩减值自动缩短柜门和抽屉面板。
- How hardware positioning and shutter reductions workLearn how the platform handles hardware positioning on shutters and shutter reductions as built-in features for modular furniture.
- How new cabinets get their default shutter thicknessLearn where the shutter thickness applied to a newly placed cabinet comes from.
- 在设计方案中打开和关闭抽屉与柜门打开抽屉或柜门,查看其移动效果;重新打开该设计方案时,它们会保持该状态。
- Set External finish source to shutter external finishSet the External finish source to the shutter external finish so a thick shutter core gets its finish from the right place.
- Set handle position on selected shutters after Modify HandleApply a handle to several selected cabinets or wardrobes through Modify Handle, then set the handle position for the selected shutters.
- Snap lofts carcass-to-carcass, not shutter-to-shutterAlign loft units by their carcasses rather than their shutters, since shutters carry a 2 mm gap between them.
- 开启 Automatic Shutter Design Picker在 Other Preferences 下启用该偏好设置,这样应用门板设计时,会从同一目录组中选取尺寸最接近的设计。
- Understand the fixed main partition in a rolling shutter moduleLearn that a rolling shutter module's main partition is fixed and cannot be adjusted through the reduction parameters.