Справка Infurnia

Эта страница пока недоступна на языке: Русский.

Design

Apply core and material changes to several units at once

Use bulk edit, group selection and common properties to change materials across many cabinets and wardrobes in one go.

  1. The carcass/core material of a base cabinet can be set explicitly per cabinet from the cabinet's material settings, or applied to several selected units at once via bulk edit, so the carcass matches the shutter material.

  2. Verify the material name and thickness in the material list before applying.

  3. Selecting several units in the unit list and changing the core material in the core material setting applies the new core material to all the selected units at once, so the whole design does not need to be redone.

  4. When several cabinets and wardrobes come in with the default shutter colour, select them all together and change the shutter colour option once for the whole selection; the change is applied to every selected unit at once instead of editing them one by one.

  5. To change the material of several cabinets or wardrobes at once, select the objects (left-to-right drag selects only items fully inside the area; right-to-left drag selects every item it touches), open the common properties / common modular actions panel, then go to Cabinets and Wardrobes and choose Change Material. The same material options as the material tab appear, including internal, core material and edgeband, and the change applies to all selected items.

    ✓ Проверено в продукте 20 октября 2026 г.
  6. After placing a unit, its internal finish, shutter internal finish and core material appear in the properties panel on the left, so you can verify that the configured defaults were applied to the unit.

    ✓ Проверено в продукте 19 октября 2026 г.
  7. To change one cabinet inside a group, select that cabinet in the group's selection tree (Group above Cabinet) and make the finish change at the cabinet level; the change applies only to the selected cabinet while it remains in the group.

  8. When the external=internal automation is enabled, changing a shutter's external finish also changes its internal finish to the same material, with an info message confirming the internal finish was changed as well.