기둥
가이드: 12
- Add columns, beams and slabs from the architecture toolsPlace columns, beams and slabs on your floor plan and adjust their dimensions, end points, height and thickness.
- 큐브 기둥으로 기둥 크기를 자유롭게 조정기둥의 크기를 변경해야 할 때는 프로파일 기둥을 큐브 기둥으로 교체하고, 모양이 필요하지 않으면 프로파일 기둥을 제거하세요.
- 프로파일 편집 또는 보이드 기둥 도구를 사용하여 기둥의 크기 조정프로파일 편집으로 기둥의 크기와 높이를 변경한 다음, 같은 방법으로 보를 배치하세요.
- 프로파일을 편집하여 기둥 회전기둥의 프로파일을 편집하고 회전된 방향으로 다시 정의하여 기둥의 방향을 변경합니다.
- 요소 회전 및 칼럼 프로파일 편집스페이스바로 요소를 회전하고 프로파일 편집 기능으로 칼럼 프로파일을 편집합니다.
- Add a column on the plan with Architecture > ColumnsPlace a column on the plan with one click and set its profile, dimensions, material and skirting in the Profile Column panel.
- Add architectural columns and beams from ground floor plan viewAdd architectural columns and beams by working in the ground floor plan view and choosing them from the architecture options.
- Add columns and beams using the cuboidal column optionLearn the two column types available, normal profile column and cuboidal column, before placing columns and beams.
- 높이와 치수로 기둥 배치기둥의 높이와 치수를 정의한 다음 벽 안이나 모서리에 배치하세요.
- 방 안에 보와 기둥을 배치하고 프로파일을 편집합니다방 안에 보나 기둥을 추가하고, 단면을 변경하며, 정확하게 위치를 조정합니다.
- 도구를 사용하여 보와 기둥을 배치하세요각각의 도구로 보와 기둥을 추가하고, 기둥의 높이는 벽 높이로, 보의 높이와 기준 높이는 별도로 설정하세요.
- Place beams and columns, then adjust width, depth and heightPlace a beam or column in the model and adjust its width and depth from the panel.