브랜드
가이드: 30
- 카탈로그에서 하드웨어 브랜드 선택사용하는 하드웨어 브랜드를 선택하면 카탈로그에 해당 카테고리가 표시되고 드릴링 패턴을 조정할 수 있습니다.
- 브랜드 목록에 어떤 브랜드가 표시되는지 알아보기브랜드 목록에 자체 브랜드, Infurnia 글로벌 브랜드, 구독 카탈로그 브랜드 중 어떤 것이 표시되는지와 각각으로 무엇을 할 수 있는지 알아보세요.
- Edit SK properties에서 하드웨어 SKU의 브랜드 찾기Edit SK properties를 열면 하드웨어 SKU의 브랜드를 확인할 수 있습니다.
- 조직의 품목에 누락된 브랜드 추가목록에 없는 현지 하드웨어 또는 기타 브랜드를 추가하여 조직의 품목에서 사용할 수 있습니다.
- 마켓에 등록되지 않은 브랜드의 개인 브랜드 만들기마켓에 등록되지 않은 모든 브랜드의 개인 브랜드를 만들 수 있습니다.
- 모든 브랜드의 라미네이트를 보려면 브랜드 필터를 제거하세요필터에서 브랜드 선택을 해제하고 적용하면 목록에 창고에 있는 모든 브랜드의 라미네이트가 표시됩니다.
- 마감재, 재료 또는 라미네이트 SKU에 브랜드 지정마감재의 재료 정보를 편집하거나, 재료를 생성하거나, SKU 속성을 설정할 때 저장된 브랜드를 선택하세요.
- Brands 페이지에서 브랜드 만들기자체 브랜드를 추가하면 조직의 브랜드 목록에 포함되어 선택할 수 있게 됩니다.
- 핸들 프로파일이 없는 브랜드의 핸들 모델링 방법일부 브랜드는 도어 프로파일만 사용하고 핸들을 별도의 나사 체결 부품으로 부착하는 방식을 알아보세요.
- 하드웨어 브랜드별 고라 프로파일 도어 축소 값 설정고라 프로파일이 도어 높이를 어떻게 줄이는지, 그리고 너비와 높이의 축소 값이 하드웨어 브랜드에 따라 달라지는 이유를 알아보세요.
- Capture brand, SKU name and article number for hardwareRecord the brand name, SKU name and article number for hardware components and put screw diameter and depth in the item name so every part is identifiable in the catalogue.
- 검색을 사용하여 브랜드 이름으로 브랜드 카탈로그 필터링필터에서 브랜드 이름을 검색하여 외부 브랜드 카탈로그를 단일 브랜드의 항목으로 좁힙니다.
- Find and add brands on the admin portal's Brands pageUse the Org Brands, Global Brands and Deleted Brands tabs, search by brand name and add a brand from the top right of the Brands page.
- Price different brands and thicknesses with copied materialsCopy or clone a material entry so different brands and thicknesses carry their own cost while keeping manufacturing details.
- Select a brand before adding laminatesChoose a brand first so the laminate list shows only that brand's items instead of every brand's.
- Set up drawer brands as subcategories under the drawer system hierarchyConfigure drawer systems (tandems) with the same hierarchical structure as finishes.
- 브랜드의 판매 채널을 구독하여 해당 브랜드의 항목을 추가하세요해당 브랜드의 판매 채널을 구독하여 브랜드 하드웨어 또는 디자인을 카탈로그에 추가하세요.
- Subscribe to brand catalogues to keep their items availableSubscribe to a brand's catalogue so that brand's items stay available for later use, including when you add a pull-out from the warehouse.
- Use filter search to narrow laminates by brand and applySelect the matching entries and click Apply to narrow the catalogue list to just those items.
- Add From Warehouse 브랜드 필터와 그룹 선택 사용브랜드로 창고를 필터링하고, 하위 카테고리를 선택하고, 그룹을 체크한 후 적용하세요. 브랜드 필터는 재설정할 때까지 유지됩니다.
- 속성, 브랜드, 마감을 포함한 새 SKU를 카탈로그에 추가카탈로그 SKU를 생성하고 구조, 재료, 철물, 액세서리, 걸레받이, 마감 속성을 입력한 뒤 상면도 이미지와 브랜드를 설정하고 마감 세부 정보를 정의합니다.
- 기본 경첩 이름을 브랜드에 맞게 변경관리자 커넥터 카드에서 소프트웨어에 표시되는 기본 경첩 이름을 특정 브랜드에 맞게 변경하세요.
- 서랍 시스템을 복제하여 탠덤 브랜드 추가기존 서랍 시스템을 복제하고 복제본을 편집하여 새 탠덤 서랍 브랜드를 추가합니다.
- Select Brands와 Apply를 사용하여 브랜드별로 카탈로그 자재를 필터링하세요자재 카탈로그를 원하는 브랜드로 좁힌 다음 선택 항목을 적용하여 해당 브랜드만 표시하세요.
- 카테고리, 브랜드 및 기본 옵션으로 디자이너 입력 규칙 추가디자이너가 설계 중 드롭다운에서 하드웨어나 구성 요소를 선택할 수 있도록 디자이너 입력 규칙을 생성하고, 한 항목을 기본값으로 미리 선택합니다.
- 카탈로그에서 브랜드의 판매 채널 생성Infurnia 카탈로그에서 브랜드의 판매 채널을 생성하고 업데이트합니다.
- Filter finishes by brand and finish typeNarrow the finish list by a specific brand and by finish types such as fabrics and cement finishes.
- Filter finishes by brand name and add them to your catalogueFilter the finish list by a brand name and apply it so only that brand's items are shown.
다른 가이드 2
모두 보기 (2)
- 관리자 제조 설정에서 커넥터 이름 및 브랜드 변경Manufacturing Settings에서 일반 커넥터 목록을 찾아 다월의 이름, 모델 번호 및 브랜드를 변경하십시오.
- Control back panel and bottom panel sizes from the catalogueLet hardware brand definitions fill in back panel height and bottom panel depth, override them when needed, and know that the design uses the catalogue value.