Read entered vs cutlist panel dimensions
See why a panel's editable dimension can differ from the value that goes to the cutlist and board layout.
Every panel has two dimension sets: the value the designer entered (raw) and the finished value that goes to the cutlist and board layout (adjusted).
✓ 2026年10月22日に製品で確認済みFor a flat panel, the adjusted value equals the entered value plus any panel extensions (extensions are ignored once a dimension is marked fixed) minus the depth of any profiles applied on that edge.
For a curved panel, the adjusted value is instead the flattened blank length measured along the curved path, with the panel extensions already taken into account along that path.
For custom panels the editable dimension input always shows the entered value.
✓ 2026年10月22日に製品で確認済みWhen the cutlist value differs (for example a profile is applied), the input is relabelled 'Entered L' or 'Entered W' and a read-only 'L'/'W' row appears right below it showing the cutlist value, with an info tooltip that spells out both numbers and the reason for the difference.
✓ 2026年10月22日に製品で確認済みFor non-custom panels (carcass panels etc.) the Dimensions section is read-only and always shows the cutlist value.
✓ 2026年10月22日に製品で確認済み