Drawers
Guides: 142
- Add a drawer to a cabinet via partition level and drawer setInsert a drawer inside a cabinet from its partition level, then set its heights and add a shelf below if needed.
- Set box height and move a drawer downEdit the box height manually, account for height reduction, and lower a drawer with Bottom Elevation.
- Edit drawer height and depth at drawer levelSelect drawers and set their height and depth, including several drawers at once.
- Add drawers with a normal box drawer or a drawer setAdd drawers either as a normal (box) drawer with a specified number of drawers or as a drawer set, and set the height and depth for the drawer unit.
- Change drawer height and swap drawer inserts like baskets or cutlery traysAdjust a drawer's height, replace its type, and add inserts such as wire baskets or PVC cutlery trays.
- Add and configure internal drawers in a wardrobeAdd an internal drawer to a wardrobe by defining the partition height, setting the drawer to internal and box type, and aligning fillers with the shutter thickness.
- Create external wardrobe drawers by removing shutters and adding a shelf zoneRemove the existing shutters and add a shelf zone so you can create external drawers in a wardrobe.
- Recheck drawer settings after switching to a box drawerRe-verify the drawer-level settings after changing a drawer from normal to box type so the heights, offsets and panel details stay correct.
- Fix a drawer box that is taller than its openingReduce a drawer box height that is larger than the drawer opening so the drawer fits.
- Create an internal drawer by turning off fascia and extending shutterAdd a normal drawer, turn off its fascia so it has no front, then extend the shutter fascia above it to cover the opening.
- Add additional drawers and size the drawer boxAdd drawers from the customize option and set the bottom panel offset and drawer depth per wardrobe.
- Control drawer depth via Customize and the channelSet the channel depth for a drawer and fit it into the cabinet with the right panel thickness and fillers.
- Fix drawer height errors and collisionsUnfix drawers so the system recalculates, and reduce box height when a drawer hits the carcass.
- Add an internal tandem drawer set and recess it with an offsetAdd a Draw Set to a partition, clear a blocking hinge with a left filler, and recess the drawer by setting its offset from the front.
- How drawer systems work in cabinetsLearn how drawer systems are configured at the drawer level, including choosing mechanism types and mixing hardware per drawer.
- Use add drawer set for production-ready wardrobe drawersAdd production-ready drawers inside a wardrobe or cabinet by using the add drawer set option and setting the partition height to fit it.
- Add extra drawers via drawer system customizationAdd more drawers to a cabinet by setting the number of additional drawers in the drawer system customization option.
- How drawer-set fillers workLearn how fillers are added to tandem and wooden drawer sets and how each side can be changed on its own.
- Make a drawer internal and box type in drawer systemsConvert a newly added external drawer into an internal drawer and size the space it sits in to match the drawer height.
- Add drawers by selecting the partition, not by undoingAdd one or more drawers to a unit by selecting the partition where each drawer should sit and entering the quantity.
- Add drawers individually or as drawer setsAdd drawers one at a time or as pre-measured drawer sets, created in Admin under Furniture > Drawer Sets.
- Choose a drawer filler typePick between both-side, left-side and right-side filler when you add drawers.
- Fix a drawer that protrudes past the back panelResolve a drawer sticking out past the back panel by choosing a channel that matches the usable cabinet depth.
- Position drawers and fascia with Offset from topUse the Offset from top values to place the drawer and fascia from the top of the system.
- Tell internal and external drawers apart by placementLearn how internal and external drawers differ by where they sit, and how drawers can be added with both-side, left-side or right-side fillers depending on the wardrobe type.
- Understand automatic grooving for back and drawer bottom panelsLearn when the software adds grooving automatically and how to change back panel grooving across all units at once.
- Understand drawer depth in box, normal and tandem constructionSee where the drawer depth comes from in each construction and how tandem panels are sized automatically.
- Add a telescopic channel to a drawerAdd a telescopic runner to a drawer by choosing the telescopic option from the channel list in the cabinet's customize middle section.
- Add or re-add drawer accessories at drawer levelOpen the drawer system and drawer construction at drawer level to add accessories such as tandem hardware.
- Choose drawer filler options on the shutter sideWhen configuring a drawer, choose fillers on both sides, a left-side filler or a right-side filler.
- Configure tandem drawer system and set box heightCreate a one-drawer drawer set, switch it to a tandem internal drawer, and set its facial and box height at drawer level.
- Convert a drawer to a wire basket or add a cutlery tray insertChange a drawer into a wire basket or add a cutlery tray insert, choosing sizes that match the cabinet.
- Drawer bottom elevation is 12 and construction setting is 20Connectors are already present in the construction.
- Edit drawer depth in box and other drawer constructionsChange the drawer depth in box drawer construction through the editable Default Drawer Depth value, while other constructions keep the Drawer Depth field disabled.
- Fix a drawer that crosses the cabinet frontCheck the Drawer Back Gap on an external drawer so the drawer stops crossing the cabinet front.
- Set a custom drawer depth with a channel fittedUse the Depth Reduction in the drawer's Other Parameters to make a drawer shallower while the channel stays on.
- Set left and right filler widths in drawer-system constructionGive each side of a drawer system its own filler width and control whether the front filler panel is visible.
- Work out drawer depth from the channel depth and Depth ReductionUnderstand how the selected channel's depth and the Depth Reduction value together determine the drawer depth.
- Add fillers to a drawer system with hinged shuttersAdd fillers to a drawer system used with hinged shutters so the parts do not collide, then trim the default three panels to suit.
- Add or remove drawers from a partition via drawer system controlsAdd drawers to a partition from the partition section and remove them from the drawer system, while also adding shelves or vertical partitions.
- Add or remove drawers from drawer system customizationAdd extra drawers at system level or remove a single drawer at drawer level.
- Change drawer depth from 450 to 400Change the default drawer depth in the cabinet design module to 400 depending on the channel used.
- Configure external drawer sets with one, two or three drawersAdd external drawers from the subcategory and warehouse, then adjust drawer height, box height and bottom panel offset.
- Customize drawer height, channel and bottom panel thicknessAdjust the drawer height, channel settings and bottom panel thickness so the drawer construction matches the required dimensions.
- How drawer depth is derived from the constructionLearn why the drawer channel properties show Channel Depth, Channel Width and partition depth but no drawer depth field, and where drawer depth comes from instead.
- How drawers default to internal or externalLearn which drawers are internal or external by default and how to switch a drawer between the two.
- Plan drawers, shutters and partitions before buildingSet shelf reveal, partition heights and shutter or drawer zones before customizing the internals.
- Remove a clashing drawer filler in sliding-shutter unitsRemove the filler on the side that would clash individually from the Construction panel in sliding-shutter units with a vertical partition and drawers at the extreme left or right.
- Set drawer heights, front panel reduction and carcass 1mm reductionConfigure the drawer settings structure and drawer-level construction with the required heights, then set the front panel reduction at drawer level.
- Set the section height for a drawer above a shutterAdd a shelf at partition level and set the section height so the drawer above a shutter comes out at the height you want.
- Work out usable drawer depth in a wardrobeSize a wardrobe drawer by subtracting the shelf reveal, back panel offset, back panel thickness and drawer fascia thickness from the cabinet depth.
- Add a drawer by attaching it to a shelf in the space partitionPlace a drawer inside a compartment by first adding a shelf at the required height and then attaching the drawer to that shelf in the space partition.
- Add a drawer set from the partition's quick access menuAdd external or internal drawers to a partition and place LHS and RHS drawer sets side by side correctly.
- Add side-by-side drawers with a vertical partitionCreate side-by-side drawers by placing one vertical partition between them and sizing it to the drawer height.
- Assign a drawer channel from the drawer channel dropdownChoose the drawer channel for a cabinet from the drawer channel dropdown in the drawer settings.
- Check drawer width against channel width and fillersWork out the usable drawer width after the channel width on each side and any side fillers are subtracted.
- Configure drawer channel via draw level customizationSet the drawer channel from the draw level in the channel library, then adjust its width and depth.
- Convert a drawer into a keyboard tray by turning off fasciaTurn off the fascia option in the drawer level settings so the drawer front is removed and the unit reads as an open keyboard tray.
- How the drawer bottom panel is grooved into the drawer sidesLearn how Infurnia grooves the drawer bottom panel into the drawer sides, including the four-sided grooving used in wooden drawer construction.
- Set drawer side reductions and fascia extensions in a drawer unitAdjust a drawer's own panel reductions and extensions to resize and reshape its fascia in a 3 Drawer Unit.
- Add a drawer set and apply box constructionAdd a drawer set from the partition, create it with channels, and switch the construction to Box Type.
- Add and size accessory objects in drawersAdd baskets, tandem boxes and other drawer hardware, then size and position them by turning auto-scale on or off.
- Add drawer sets to sliding wardrobesConfigure drawer sets for a sliding wardrobe in your design.
- Add drawers on both sides of a unitAdd a vertical panel first, then add the drawers on each side so drawers can sit on both sides of the unit.
- Change a filler's width on the drawer systemSet a filler's starting width from the unit's construction value and adjust it per side under Properties & Panel Visibility.
- Change drawer facia via drawer level shutter configChange the facia of a drawer by selecting a shutter configuration at the drawer level of the drawer system.
- Change the default internal depth of 500 mm for drawersLearn how the suggested 500 mm internal depth for drawers is set and how to override it to the depth you need.
- Create drawer cutouts via panel design with parametric formulasDraw a rectangle on a carcass panel in panel design and drive its edges with parameters so drawer openings update automatically.
- Create side-by-side drawers by insetting the vertical panelSplit a section into halves with a fixed shelf and vertical, assign a drawer set to each half, then hide the vertical by moving the panel inward.
- How drawer finishes inherit carcass finishesLearn how drawer finishes follow the carcass internal and external finish until you change them explicitly at the drawer system level.
- Position a drawer box with bottom elevation and bottom panel offsetRaise the drawer box above the shutter bottom with bottom elevation and fine-tune the bottom panel with its offset, remembering that the offset reduces the drawer box height.
- Set drawer fascia height by adjusting partition dimension with a negative offsetSee how the partition height shown is the full height minus the panel thickness when you set drawer fascia height with a negative offset.
- Set shelves above and below drawers as fixedSet the shelves above and below the drawers in a wardrobe as fixed rather than adjustable.
- Size a drawer to fit a carcass with a back panelWork out the usable internal depth of a carcass so a drawer fits without hitting the back panel.
- Add Drawers vs Drawer Set, and normal vs box type drawersLearn how Add Drawers spreads drawers equally within a partition and how normal drawers adjust to partition height.
- Add a basket to a drawer in an insert collectionAdd the drawer first, then apply the basket option, keeping in mind that a basket cannot be combined with tandem box drawers in the same insert collection.
- Add internal drawers behind wardrobe shuttersAdd drawers on a partition and switch the new Drawer System's Properties > Type to Internal so the drawers sit behind the shutters.
- Adjust non-standard drawer sizes with an extension valueFit drawers to non-standard openings by applying an extension value to match the client's requirements.
- Change drawer channels in the design portal with multi-selectSelect multiple items in the design portal and change their drawer channels in one go.
- Change drawer fascia design from the drawer panelPick a different drawer fascia design from the drawer panel.
- Choose drawer system for drawers and shutter system for shutters in constructionConfigure each cabinet front under the right system and construction, drawers under the drawer system and shutters under the shutter system.
- Control drawer front position with offset valuesSet the offset values to control how the drawer front sits relative to the cabinet opening.
- Create a handleless drawer using a finger groove cutApply a profile or gola handle from the handle options when you want a handle instead of a finger groove cut.
- Create side-by-side drawers manually with a vertical partitionBuild side-by-side drawers by adding a shelf and a vertical partition, then placing a drawer on each side.
- How changing a drawer accessory type rebuilds the drawerLearn what happens to a drawer when you change its accessory type, including how fascia reduction values and tandem changes are handled.
- How drawer fronts behave over a split verticalLearn how a drawer front spans a vertical when a drawer set sits in one half of a split section, and how it changes once the other half gets one.
- Set drawer filler width and match filler panel material thicknessMake a drawer filler panel thicker by giving it its own custom core material so it matches the surrounding 25 mm board.
- Set drawer tandem hardware at drawer levelChoose the tandem or drawer hardware for a drawer unit from the drawer level, using the SKUs configured in the catalogue.
- Set per-drawer top and bottom reductions in drawer modulesConfigure drawer modules with individual top and bottom reduction values for each drawer instead of one value for the whole module.
- Set the drawer system deduction to 2 mm for more clearanceIncrease the drawer system deduction from its 1 mm default to 2 mm so the drawer gets more clearance and moves more easily.
- Shrink drawer fascias with reduction valuesUse the drawer's Reduction values to take an amount off each side of the drawer front.
- Understand tandem drawer bottom thickness and drillingTandem drawer bottom panels are handled automatically at the standard 18mm thickness, and applying a tandem drawer system generates its drilling automatically.
- Use drawer sets instead of manual construction for side-by-side drawersBuild side-by-side drawer layouts with the drawer sets feature so channels and components stay consistent.
- Add a drawer insert such as PVC cutlery from drawer levelAdd an insert like a PVC cutlery tray to a drawer by picking its type and the size closest to the drawer.
- Add channels to drawer sets and hinges to cabinetsAdd channels to drawer sets and hinges to cabinets so each gets the right hardware.
- Add drawers at any height in a wardrobeAdd a drawer at the top of a wardrobe without being limited by the module's height.
- Change drawer bottom panel offset via admin portal bulk actionsSet the drawer bottom panel offset through the admin portal using bulk actions and panel-level edits, choosing a thickness that suits the material.
- Change drawer channels and drawer sets across several unitsLearn where a wardrobe partition's Quick Access sections sit, how to edit partition drawer settings in bulk, and how to swap drawer channels on several units at once.
- Change drawer facial configuration in drawer system settingsOpen the drawer system settings and change the facial configuration there to update a drawer.
- Change drawer runners to ball-bearing via drawer-level CustomizeSelect an individual drawer, go to the drawer level and use Customize to change its channel to another runner type such as ball-bearing.
- Choose between normal and box drawers in a drawer systemLearn how a normal drawer auto-calculates its balance space and how to switch a drawer type back to normal.
- Drawer heights auto-fit within available clear heightDrawer heights auto-fit to the available clear height of the cabinet opening.
- Fix drawers below shelves and correct wrong construction settingsSet the shelf panel to fixed above a drawer and re-add drawers to correct construction settings quickly.
- How pull-out drawer width is reduced by channel widthLearn how a pull-out drawer's width is reduced by twice its Default Channel Width, and how tandem box drawers take their side gap from the tandem box instead.
- Move internal drawers back and shorten fillers in a drawer systemSet Drawer Offset(from front) to push an internal drawer set's boxes and fascias back, and Fillers Depth Reduction to shorten the fillers from the front.
- Open and close drawers and shutters in a designOpen a drawer or shutter to see it move and stay that way when the design is reopened.
- Remove a drawer system from a unitRemove the drawer system from a unit and see the unit with no drawer system.
- Restore a drawer's 1:1 ratio by setting height back to autoSwitch a drawer's height from fixed back to auto-calculated to return it to the original 1:1 ratio.
- See which drawer inputs a channel or tandem item locksRecognise the drawer inputs that become read-only once a channel or tandem item declares its properties.
- Select a drawer to change its insert, basket or heightSelect the drawer component itself so its catalog options for inserts, baskets and height appear.
- Set default drawer height and channel lengthConfigure a standard drawer height default with its matching internal drawer body, and set the default drawer channel length in the admin hardware drawer sets.
- Switch a drawer back to auto-sizing to free the fixed-height constraintTurn off a drawer's fixed-height switch so it returns to auto-sizing and another drawer can take a fixed height.
- Toggle drawer side panels on or off via panel visibility settingsShow or hide a drawer's side panels by selecting the drawer and using its panel visibility options.
- Understand normal vs box drawer construction and cloningSee how box drawers hang from the top with explicit heights and how adding a drawer clones the last one.
- Understand the standard cabinet drawer division ratioLearn the drawer division ratio used for a standard cabinet with a normal handle.
- Understand the three editable drawer levelsLearn how a drawer is split into the drawer system level, the drawer level and the panel level, each editable on its own.
- Understand what a two-drawer medium unit providesLearn what a two-drawer medium unit gives you in kitchen drawer units.
- Zero out panel and drawer construction offsets to fix drawer heightFix a drawer whose height or fit is wrong by checking its height value and zeroing the panel and bottom offsets that affect it.
- Build a wardrobe internal with shelves, drawers and hanger rodsAdd a shelf, drawer, vertical, hanger rod and pull-out hanger rod in the right order to build a wardrobe internal.
- Build wardrobe internals using partitions, shelves and drawer systemsAdd shelves, drawer systems and construction options inside a wardrobe's partitions to build out its internals.
- Add and configure partitions, shelves, drawers and shuttersAdd components at partition level so each shelf, drawer set or shutter system applies only to that portion of the unit.
- Add wardrobe internals, drawer sets and mirrorsComplete a wardrobe interior by adding vertical partitions, shelves, hanging accessories, drawer sets and shutter mirrors.
- Convert a full-height shutter into drawersTurn a full-height shutter into drawers by removing it from the shutter system and adding drawers at partition level.
- Convert a shutter cabinet to drawers and baskets by editing the systemTurn a single-shutter cabinet into a wicker basket and drawer unit by removing the shutter and customizing the system, then add, remove and adjust drawers and partitions.
- How cabinet structure splits into shutters, drawers and accessoriesLearn how a cabinet's structure is divided into shutters, drawers and accessories, and how shutter and drawer systems are configured separately.
- Set fixed height to control partition division and add drawersDivide a cabinet partition with a shelf or vertical partition, set a fixed height on a section to size it, then add a hanging rod or shelf.
- Set shelf reveal to zero for external shutters and drawersSet the shelf reveal to zero so external shutters and drawers are not offset by the internal shelf spacing.
- Add a vertical partition and drawers on either sideChoose which side a vertical partition goes on, then add and configure drawers on each side once the vertical and shelves are in place.
- Add custom panels to a drawer system and map them as carcass materialAdd custom panels at the drawer system level and set their material at any panel level to map them as carcass material.
- Understand how cabinets and drawer channels appear in the Pricing QuotationLearn how Base Unit, Wall Unit and Tall Unit cabinets are labelled and listed, and how a drawer's channel is counted and priced in the quotation.
- Add a handle at drawer level with the drawer handle selectorAssign a handle to a single drawer, or to several cabinets at once, without touching placement or orientation settings.
- Apply and remove drawer handles per drawerConfigure each drawer with its own handle instead of one common handle for the whole unit.
- Merge shutters and drawer fasciasMake one shutter span several partitions or one fascia span several drawers, and learn what the merge requires.
- Set shutters and drawers to internal finish to keep outer frame visibleMake the outer frame sit outside the shutter face by setting the shutter to internal and the drawer facia to the external finish.
- Understand partitions and add shelves, panels or drawers inside a cabinetLearn what a partition is in Infurnia and add shelves, vertical panels or drawers at the partition level.
- Align a shelf between a shutter and a drawerLearn where a shelf sits by default between a shutter and a drawer and how to shift its alignment by adjusting the extension.
- Remove edge bands from PU shutters and internal drawersRemove the mapped edge band from PU shutters or internal drawers so edge binding no longer appears on those parts.
- Adjust panel-level reduction to resize an external drawerChange the panel-level reduction parameter with a minus value to make an external drawer larger.
- How gola and FGP handles shrink shutters and drawersLearn how gola and finger-groove handle items automatically shorten shutters and drawer fronts through reduction values set on the handle item.
- Modify shutters, handles, drawers and materials from the property tabChange shutters, handles, drawers and materials from the property tab and see each change apply in a click.
- Set the shutter reduction for a J profile drawerSet the shutter reduction to 30 when you use a J profile drawer.
- Use an invisible shelf to adjust partition height for drawersAdd a shelf, hide it, and use it to set partition height for drawer systems without a physical shelf.