Infurnia Support

Select the cabinet you want to change the skirting for.

Look for the menu labeled "Cabinet" on the right of the design panel. It would be arranged in a vertical order as Cabinet&gt;Partition&gt;Drawer Systems&gt;Drawer&gt; Panel etc. Click on it to access the settings related to drawer.

Within the "Cabinet" menu, go into the "Construction" tab and you will find the "Skirting options" section. Click on the drop down next to it to open the details.

Under "Skirting Type" select "Wooden" and you will now see additional properties related to wooden skirting. 

Under "Skirting Height" section you can revise the height by inputting the required value in mm. 

Under "Skirting alignment", you can specify if you want the skirting to align with carcass or shutter. 

Click on the drop down next to "Skirting Material Source" to specify in the "Source" if you want to match the skirting with carcass, shutter or none. 

If you select "Match with None" you can specify material specifications of it's own for the wooden skirting. Click on the drop down next to "Materials" and specify the same. 

1. Select the cabinet you want to change the skirting for.
2. Look for the menu labeled "Cabinet" on the right of the design panel. It would be arranged in a vertical order as Cabinet&gt;Partition&gt;Drawer Systems&gt;Drawer&gt; Panel etc. Click on it to access the settings related to drawer.
3. Within the "Cabinet" menu, go into the "Construction" tab and you will find the "Skirting options" section. Click on the drop down next to it to open the details.
4. Under "Skirting Type" select "Wooden" and you will now see additional properties related to wooden skirting. 
5. Under "Skirting Height" section you can revise the height by inputting the required value in mm. 
6. Under "Skirting alignment", you can specify if you want the skirting to align with carcass or shutter. 
7. Click on the drop down next to "Skirting Material Source" to specify in the "Source" if you want to match the skirting with carcass, shutter or none. 
8. If you select "Match with None" you can specify material specifications of it's own for the wooden skirting. Click on the drop down next to "Materials" and specify the same. 