Add and size accessory objects in drawers
Add baskets, tandem boxes and other drawer hardware, then size and position them by turning auto-scale on or off.
Catalogue objects (baskets, tandem boxes, drawer inserts, channels, lift-up hardware and similar accessory units) have per-axis auto-scale toggles (along width / depth / height).
✓ 已于 2026年10月9日 在产品中核实When auto-scale is on for an axis, the object stretches automatically to fit its host (drawer, shutter, section) and the corresponding dimension field in the properties panel is disabled — turn the toggle off to size it manually.
✓ 已于 2026年10月9日 在产品中核实Certain hosted objects also have their position locked because it is computed from the host (for example lift-up hardware, hanging rods, and the vertical gola).
Objects additionally support overriding the material of individual sub-parts (per mesh) without changing the rest of the model.
✓ 已于 2026年10月9日 在产品中核实Objects can define a custom origin point used for placement.
If a user cannot edit an object's width, check the auto-scale toggle first.
A drawer's accessory type is changed at drawer level from the "Accessory Type" dropdown, where basket is one of the options.
Once the basket is applied, its height can be adjusted in the properties panel (turn off the height auto-scale toggle if the field is disabled).
Tandem channels and other drawer hardware are added at the individual drawer level with the drawer's Accessory Type control.
Tandem channels and other drawer hardware can also be changed per drawer system (Channel, Tandem Box / Basket Collection).
✓ 已于 2026年10月10日 在产品中核实Tandem channels and other drawer hardware can also be changed across several selected cabinets at once (Modify Tandem Box / Modify Basket / Change Drawer Channels).
✓ 已于 2026年10月21日 在产品中核实
To add a tandem box, select the drawer, set its Accessory Type to tandem box, then choose the required tandem from the tandem box selector; repeat this on each drawer (for example the top drawer) that needs one.
✓ 已于 2026年10月10日 在产品中核实