Understand cabinet panel materials and linked finishes

See what each sub-tab under a cabinet's Materials holds and how linked finishes and profiles change edge bands and finishes automatically.

1. Besides the shutter and carcass external / internal finishes, the Finishes sub-tab holds 'Set External = Internal for Postlam' and 'Edgeband Linking'.

2. The Core sub-tab lists the shutter, carcass and carcass back core materials, then a collapsed 'Custom Core' section.

3. The Edgeband sub-tab adds a 'Cut Edgeband' selector after the shutter and carcass visible / invisible edge bands.

4. Picking a profile in a cabinet's Shutter System > Shutter Profiles (Handle Profile / Non Handle Profile) adds the profile on the shutter panels' sides and removes those panels' edge bands on the sides the profiles take, with the notices 'Edgebands have been removed for [<sides>] of <panel>' and 'Shutter panel edgeband types might change on addition of profile'.

   ✓ 21 அக்டோபர், 2026 அன்று தயாரிப்பில் சரிபார்க்கப்பட்டது

5. Choosing a board laminated on one face only (for example '18mm Prelam MDF Frosty White One Side', prelaminated on its external face) as a cabinet's shutter core shows 'Linked external finish has been auto-applied.' and the cabinet's Shutter External Finish then shows the board's own finish and cannot be changed; the Shutter Internal Finish can still be changed.

   ✓ 19 அக்டோபர், 2026 அன்று தயாரிப்பில் சரிபார்க்கப்பட்டது

6. Setting a cabinet's carcass finish to a finish whose catalogue item has linked edge bands shows the message 'The applied finish has linked edgebands which will also be auto-applied.' (seen when the carcass internal finish was set, with the cabinet's Edgeband Linking for the carcass on Internal Finish).

   ✓ 21 அக்டோபர், 2026 அன்று தயாரிப்பில் சரிபார்க்கப்பட்டது