Read a panel's machining and edge-band drawing in 2D Panel CAM Mode
Open a panel's 2D Panel CAM Mode to see its hinge cups, drill and contour legends, edge-band labels and view options.
In 2D Panel CAM Mode (the production view of a design that has been sent to production: select a panel, then Enter 2D Panel CAM Mode) each edge of the drawn panel is labelled with its edge band and, in brackets, the band's length, for example 'Back(EB_0.8 x 22 (718.4))' and 'Left(EB_0.8 x 22 (558.4))' on a 720 x 560 side panel with 0.8 mm bands; the drawing's title is the panel's code and name (e.g. 'C1.P6(Left Panel)'), and the mode's toolbar switches the view (All, Top, Bottom, Left, Right, Front, Back) and offers PDF.
✓ Проверено в продукте 20 октября 2026 г.In a production design's 2D Panel CAM Mode, 'Mach..' (Post-processed machining operations) draws the panel as the machine will cut it, with a drill legend (diameter, depth, direction, count per drill type) and a contour legend (each contour's type such as Route or Pocket, depth, direction and tool); a pocket is drawn filled, a routed contour as its outline.
✓ Проверено в продукте 19 октября 2026 г.The panel's drawing with its hinge cups and the Drill Legend is in the panel's Enter 2D Panel CAM Mode.
Replacing the left panel's hinge on the selected scenario changed that scenario only and its red 'Hardware Source - Rule' mark went; the right panel's hinge kept its card and mark.