Set up stations and operators for panel tracking

Start tracking with one person at a chosen station and add stations and operators as work progresses.

1. Tracking is typically started with one person at a chosen station, most often packaging or shipment, with CNC stations added later.

2. To track a panel through later stages, switch the selected station in the portal (for example from Panel Cutting to Edgebanding or CNC) and scan the same panel QR again; the scan is recorded against the newly selected station.

   ✓ 20 ਅਕਤੂਬਰ 2026 ਨੂੰ ਪ੍ਰੋਡਕਟ ਵਿੱਚ ਜਾਂਚਿਆ ਗਿਆ

   

   ਗਾਈਡ ਵੱਲ ਵਾਪਸ ਜਾਓ✕

   

3. Panels are scanned at each station from cutting through to packaging and shipping.

   ✓ 20 ਅਕਤੂਬਰ 2026 ਨੂੰ ਪ੍ਰੋਡਕਟ ਵਿੱਚ ਜਾਂਚਿਆ ਗਿਆ

   

   ਗਾਈਡ ਵੱਲ ਵਾਪਸ ਜਾਓ✕

   

4. The scanned data appears on screen showing which panels are completed.

   ✓ 20 ਅਕਤੂਬਰ 2026 ਨੂੰ ਪ੍ਰੋਡਕਟ ਵਿੱਚ ਜਾਂਚਿਆ ਗਿਆ

   

   ਗਾਈਡ ਵੱਲ ਵਾਪਸ ਜਾਓ✕

   

5. Different operators can be assigned to different stations.

   ✓ 20 ਅਕਤੂਬਰ 2026 ਨੂੰ ਪ੍ਰੋਡਕਟ ਵਿੱਚ ਜਾਂਚਿਆ ਗਿਆ

   

   ਗਾਈਡ ਵੱਲ ਵਾਪਸ ਜਾਓ✕

   

6. To record progress, the operator must also scan the panel in Infurnia (running both in separate browser tabs works).

7. A panel can be rejected by scanning its label in the MES rejection option, using either a mobile camera or the factory hardware scanner.