ଆଲୋକ
ଗାଇଡ୍: 24
- ଏକ କ୍ୟାବିନେଟ୍ ପ୍ୟାନେଲରେ ନିର୍ଦ୍ଦିଷ୍ଟ ଦୂରତାରେ ଏକ ଷ୍ଟ୍ରିପ୍ ଲାଇଟ୍ ଯୋଡ଼ନ୍ତୁଏକ କ୍ୟାବିନେଟ୍ ପ୍ୟାନେଲରେ ଏକ ଷ୍ଟ୍ରିପ୍ ଲାଇଟ୍ ଯୋଡ଼ନ୍ତୁ ଏବଂ ପ୍ୟାନେଲର ଧାରରୁ ଏହାର ଦୂରତା ସେଟ୍ କରନ୍ତୁ।
- କ୍ୟାବିନେଟ୍ ପ୍ୟାନେଲରେ ସ୍ପଟଲାଇଟ୍ କିମ୍ବା ଷ୍ଟ୍ରିପ୍ ଲାଇଟ୍ ଯୋଡ଼ନ୍ତୁ ଏବଂ ଏହାର ଆଲୋକ ଉତ୍ସ ସେଟ୍ କରନ୍ତୁକ୍ୟାବିନେଟ୍ ପ୍ୟାନେଲରେ ଏକ ଷ୍ଟ୍ରିପ୍ ଲାଇଟ୍ କିମ୍ବା ସ୍ପଟଲାଇଟ୍ ଯୋଡ଼ନ୍ତୁ, ସ୍ପଟଲାଇଟ୍କୁ ଏକ ଆଲୋକ ଉତ୍ସ ଦିଅନ୍ତୁ ଏବଂ ଏହାକୁ ସ୍ଥାପନ କରନ୍ତୁ, ଏବଂ ଆଉ ଆବଶ୍ୟକ ନ ଥିଲେ ଯେକୌଣସି ଆଲୋକ ଅପସାରଣ କରନ୍ତୁ।
- ଆୟତକ୍ଷେତ୍ର, ରେଖା କିମ୍ବା ତିନି-ବିନ୍ଦୁ ଚାପ ବ୍ୟବହାର କରି ଷ୍ଟ୍ରିପ୍ ଲାଇଟ୍ ଯୋଡ଼ନ୍ତୁInsert > Strip light ରୁ ଷ୍ଟ୍ରିପ୍ ଲାଇଟ୍ ଯୋଡ଼ନ୍ତୁ ଏବଂ ସେଗୁଡ଼ିକୁ ଆୟତକ୍ଷେତ୍ର, ରେଖା କିମ୍ବା ତିନି-ବିନ୍ଦୁ ଚାପ ଭାବରେ ଆଙ୍କନ୍ତୁ, ତାପରେ ସେଗୁଡ଼ିକର ତୀବ୍ରତା ଓ ରଙ୍ଗ ସେଟ୍ କରନ୍ତୁ।
- Add and configure panel strip lightsAdd a strip light to a panel and set its side, orientation, reference edge, position offset, length mode and extensions so it sits exactly where you want.
- ପ୍ୟାନେଲ ସ୍ତରରେ ଷ୍ଟ୍ରିପ ଲାଇଟ ଯୋଡ଼ନ୍ତୁତଳ ପ୍ୟାନେଲରେ ଏକ ଷ୍ଟ୍ରିପ ଲାଇଟ ଯୋଡ଼ନ୍ତୁ ଏବଂ ଏହାର ରେଫରେନ୍ସ ସେଟ କରନ୍ତୁ, ତାପରେ ବାମ ପ୍ୟାନେଲ ଭଳି ଅନ୍ୟ ପ୍ୟାନେଲଗୁଡ଼ିକ ପାଇଁ ପୁନରାବୃତ୍ତି କରନ୍ତୁ।
- ୱାଲ୍ କ୍ୟାବିନେଟ୍ର ତଳ ପ୍ୟାନେଲ୍ରେ ଷ୍ଟ୍ରିପ୍ ଲାଇଟ୍ ଓ ସ୍ପଟ୍ଲାଇଟ୍ ଯୋଡ଼ନ୍ତୁୱାଲ୍ କ୍ୟାବିନେଟ୍ର ତଳ ପ୍ୟାନେଲ୍ରେ ଏକ ଷ୍ଟ୍ରିପ୍ ଲାଇଟ୍ ଓ ଏକ ସ୍ପଟ୍ଲାଇଟ୍ ଯୋଡ଼ି ତାହାକୁ ଆଲୋକିତ କରନ୍ତୁ।
- ୱାଲ୍ ୟୁନିଟ୍ ପ୍ୟାନେଲରେ ଏକ ଷ୍ଟ୍ରିପ୍ ଲାଇଟ୍ ଯୋଡ଼ନ୍ତୁ ଏବଂ ଏହାର ରଙ୍ଗ ସେଟ୍ କରନ୍ତୁଏହାର ପ୍ୟାନେଲରେ ଏକ ଷ୍ଟ୍ରିପ୍ ଲାଇଟ୍ ଯୋଡ଼ି, ଆଗ କିମ୍ବା ପଛ ବାଛି, ଏବଂ ଡିଜାଇନର Lights preferencesରେ ରଙ୍ଗ ସେଟ୍ କରି ଏକ ୱାଲ୍ ୟୁନିଟ୍କୁ ଆଲୋକିତ କରନ୍ତୁ।
- ଧକ୍କା ଏଡ଼ାଇବା ପାଇଁ ପ୍ରତ୍ୟେକ ପ୍ୟାନେଲ ପାଇଁ ଷ୍ଟ୍ରିପ ଲାଇଟ ଅବସ୍ଥାନ ସେଟ କରନ୍ତୁଆଗ କିମ୍ବା ପଛ ଧାରରୁ ଦୂରତା ଭାବରେ ପ୍ରତ୍ୟେକ ପ୍ୟାନେଲ ଉପରେ ଷ୍ଟ୍ରିପ ଲାଇଟ ଅବସ୍ଥାନ ନିର୍ଣ୍ଣୟ କରନ୍ତୁ, ଯାହାଫଳରେ ଲାଇଟଗୁଡ଼ିକ ଧକ୍କା ଏଡ଼ାଇପାରିବ।
- ଏକ ସ୍ଥାପିତ ଲାଇଟ୍ ଫିକ୍ସଚର ଭିତରେ ଥିବା ଆଲୋକ ଉତ୍ସଗୁଡ଼ିକୁ ସମାୟୋଜିତ କରନ୍ତୁପ୍ରତ୍ୟେକ ଆଲୋକ ଉତ୍ସର ସ୍ଥିତି, ପ୍ରକାର, ତୀବ୍ରତା ଓ ରଙ୍ଗ ସେଟ୍ କରିବା ପାଇଁ ଏକ ସ୍ଥାପିତ ଲାଇଟ୍ ଫିକ୍ସଚରର ନିଜସ୍ୱ ପ୍ୟାନେଲ ଖୋଲନ୍ତୁ।
- ଏକ ପ୍ୟାନେଲ ଷ୍ଟ୍ରିପ ଲାଇଟର ଦିଗ ପରିବର୍ତ୍ତନ କରନ୍ତୁଯେଉଁ ପ୍ୟାନେଲରେ ଷ୍ଟ୍ରିପ ଲାଇଟ ଯୋଡ଼ା ଯାଇଥିଲା ସେହି ପ୍ୟାନେଲ ଖୋଲନ୍ତୁ ଏବଂ ସେହି ପ୍ୟାନେଲର strip-light ସେଟିଂସରେ ଏହାର ଦିଗକୁ horizontal ଏବଂ vertical ମଧ୍ୟରେ ବଦଳାନ୍ତୁ।
- ଷ୍ଟ୍ରିପ୍-ଲାଇଟ୍ ମୂଲ୍ୟ ନିର୍ଧାରଣ ଏବଂ ସ୍ୱଚାଳିତ ହାର୍ଡୱେର୍ ନିୟମ କିପରି ଚାଲୁ ଲମ୍ବ ବ୍ୟବହାର କରେଷ୍ଟ୍ରିପ୍ ଲାଇଟ୍ କିପରି ଚାଲୁ ଲମ୍ବ ଅନୁସାରେ ମୂଲ୍ୟ ନିର୍ଧାରଣ କରାଯାଏ ଏବଂ ସ୍ୱଚାଳିତ ହାର୍ଡୱେର୍ ନିୟମ କିପରି ସେଗୁଡ଼ିକୁ ପ୍ରତି SKU ପାଇଁ ଏକତ୍ରିତ କରେ ତାହା ଜାଣନ୍ତୁ।
- ଛାତ ଆଲୋକ ସ୍ଥାପନ କରନ୍ତୁ ଏବଂ ପଏଣ୍ଟ ଲାଇଟ ଓ ସ୍ପଟଲାଇଟ ତୀବ୍ରତା ସମନ୍ୱୟ କରନ୍ତୁଆଲୋକ ବିକଳ୍ପ ମେନୁରୁ ଏକ ଛାତ ଆଲୋକ ସ୍ଥାପନ କରନ୍ତୁ ଏବଂ ସ୍ଥାପନ ପରେ ଏହାର ପଏଣ୍ଟ ଲାଇଟ ଓ ସ୍ପଟଲାଇଟ ତୀବ୍ରତା ସମନ୍ୱୟ କରନ୍ତୁ।
- Add a light from the furniture light sectionAdd a light from the furniture light section, then set its position and orientation.
- Add strip lights to a panel and set their side, orientation and positionAdd a strip light from the selected panel's panel options, then move it to the other face, choose Horizontal or Vertical, and shift it along the panel.
- Adjust each light's height individuallySet each light's Y-axis position on its own, since every item's X, Y and Z position differs and bulk adjustment is not possible.
- Apply a strip light to a panelPlace a yellow strip light in the 3D model.
- ମଲ୍ଟିପ୍ଲାଏ ସ୍ଟ୍ରେଟ୍ ଫିକ୍ସଡ୍ କପି ସହିତ ଆଲୋକଗୁଡ଼ିକୁ ସମାନ ଭାବରେ ବିତରଣ କରନ୍ତୁପ୍ରତ୍ୟେକଟିକୁ ହାତରେ ରଖିବା ବିନା ଏକ ନିର୍ଦ୍ଦିଷ୍ଟ ଦୂରତାରେ ଆଇଟମଗୁଡ଼ିକୁ କପି କରି ଏକ ରେଖା ସହିତ ପୁନରାବୃତ୍ତି ହେଉଥିବା ଆଲୋକ ଫିକ୍ସଚରଗୁଡ଼ିକୁ ରଖନ୍ତୁ।
- How strip lights work on L-corner and pentagonal corner panelsAdd one strip light to an L-corner or pentagonal corner unit and it becomes two linked strips, one along each leg of the L.
- ଛାତ ଆଲୋକ ଭର୍ତ୍ତି କରନ୍ତୁ ଏବଂ ତୀବ୍ରତା, ରଙ୍ଗ ଓ ଝୁଲିବା ଅନୁପାତ ସଜାଡ଼ନ୍ତୁlight one ଏବଂ light two ଭାବରେ ଗୋଷ୍ଠୀଭୁକ୍ତ ଛାତ ଆଲୋକର ତୀବ୍ରତା ଓ ରଙ୍ଗ ସଜାଡ଼ନ୍ତୁ।
- Set exterior lighting with Env. Map or Sun lightOpen Exterior Lighting and choose either an environment map or sunlight to light the outside of your design.
- Understand where light is emitted from a fixtureLearn that a fixture's light comes from its yellow spheres rather than its body, with two default light sources giving comparable illumination to the upper and lower halves of the room.
- ଉଚ୍ଚତା ଦୃଶ୍ୟରେ ଲେବଲଗୁଡ଼ିକୁ ଫର୍ଣ୍ଣିଚର/ଲାଇଟ୍ସ ଲେବଲ ଦୃଶ୍ୟମାନତା ମାଧ୍ୟମରେ ଲୁଚାନ୍ତୁଉଚ୍ଚତା ଦୃଶ୍ୟରୁ ସେମାନଙ୍କ ଟିପ୍ପଣୀ ଲେବଲଗୁଡ଼ିକୁ ହଟାଇବା ପାଇଁ ଚୟନିତ ୟୁନିଟଗୁଡ଼ିକରେ ଲେବଲ ଦୃଶ୍ୟମାନତା ବନ୍ଦ କରନ୍ତୁ।
- Draw ceilings, tiling and strip lights in the 2D sketcherOpen the 2D sketcher to draw ceilings, tiling and strip lights with Pick, line, arc, circle, rectangle and polygon tools, then apply the result.
- Understand how a furniture light's panel lists its light sourcesLearn how a furniture light's panel lists each light source by position and what its properties and multi-selection behaviour are.