ライト
ガイド:24
- キャビネットのパネルに設定した距離でストリップライトを追加するキャビネットのパネルにストリップライトを追加し、パネルの端からの距離を設定します。
- キャビネットパネルにスポットライトまたはストリップライトを追加し、その光源を設定するキャビネットパネルにストリップライトまたはスポットライトを追加し、スポットライトに光源を設定して配置し、不要になったライトを削除します。
- 長方形、直線、または3点円弧を使ってストリップライトを追加するInsert > Strip light からストリップライトを追加し、長方形、直線、または3点円弧として描画してから、明るさと色を設定します。
- パネルストリップライトの追加と設定パネルにストリップライトを追加し、面、向き、基準辺、位置オフセット、長さモード、延長を設定して、希望の位置に正確に配置します。
- パネルレベルでテープライトを追加する底板にテープライトを追加して基準を設定し、左パネルなど他のパネルにも同様に繰り返します。
- 壁付キャビネットの底板にテープライトとスポットライトを追加する壁付キャビネットの底板にテープライトとスポットライトを追加して、キャビネットを照らします。
- 壁付きキャビネットのパネルにストリップライトを追加し、色を設定する壁付きキャビネットを照らすには、そのパネルにストリップライトを追加し、前面か背面かを選択して、デザインのLights設定で色を設定します。
- パネルごとにストリップライトの位置を設定して干渉を防ぎます各パネルでストリップライトの位置を前縁または後縁からの距離で定義し、ライトの干渉を防ぎます。
- 配置済みの照明器具内の光源を調整する配置済みの照明器具の専用パネルを開き、各光源の位置、タイプ、強度、色を設定します。
- パネルストリップライトの向きを変更するストリップライトを追加したパネルを開き、そのパネルのストリップライト設定で向きを水平と垂直の間で切り替えます。
- ストリップライトの価格設定と自動ハードウェアルールが実行長をどのように使用するかストリップライトが実行長でどのように価格設定されるか、また自動ハードウェアルールがSKUごとにそれらをどのように集計するかを学びます。
- シーリングライトを配置し、ポイントライトとスポットライトの強度を調整するライトオプションメニューからシーリングライトを配置し、配置後にポイントライトとスポットライトの強度を調整します。
- Add a light from the furniture light sectionAdd a light from the furniture light section, then set its position and orientation.
- Add strip lights to a panel and set their side, orientation and positionAdd a strip light from the selected panel's panel options, then move it to the other face, choose Horizontal or Vertical, and shift it along the panel.
- Adjust each light's height individuallySet each light's Y-axis position on its own, since every item's X, Y and Z position differs and bulk adjustment is not possible.
- Apply a strip light to a panelPlace a yellow strip light in the 3D model.
- 乗算直線固定コピーで照明を均等に配置するアイテムを固定距離でコピーして、照明器具を手動で1つずつ配置することなく、線に沿って繰り返し配置します。
- L字コーナーおよび五角形コーナーパネルにおけるストリップライトの動作L字コーナーまたは五角形コーナーユニットにストリップライトを1本追加すると、L字の各辺に沿って1本ずつ、計2本の連結されたストリップになります。
- Insert ceiling lights and adjust intensity, color and hanging proportionsAdjust the intensity and color of ceiling lights grouped as light one and light two.
- Set exterior lighting with Env. Map or Sun lightOpen Exterior Lighting and choose either an environment map or sunlight to light the outside of your design.
- Understand where light is emitted from a fixtureLearn that a fixture's light comes from its yellow spheres rather than its body, with two default light sources giving comparable illumination to the upper and lower halves of the room.
- 立面図で家具/照明のラベル表示をオフにしてラベルを非表示にする選択したユニットのラベル表示をオフにすると、立面図から注記ラベルが削除されます。
- Draw ceilings, tiling and strip lights in the 2D sketcherOpen the 2D sketcher to draw ceilings, tiling and strip lights with Pick, line, arc, circle, rectangle and polygon tools, then apply the result.
- Understand how a furniture light's panel lists its light sourcesLearn how a furniture light's panel lists each light source by position and what its properties and multi-selection behaviour are.